Revo REXN700-2 User Manual

INSTRUCTION MANUAL

Super High Resolution

Day & Night Color Camera

Model No: REXN700-2

Indoor Box Camera

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or oth

er apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized pl

ug has two blades with one wider than the other. A grounding type plug has two blade

s and a third grounding prong. The wide blade or the third prong is provided for your sa

fety. If the provided plug does not fit into your outlet, consult an electrician for replacem

ent of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, conve

nience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specifie

d by the manufacturer, or sold with the apparatus. When a ca

rt is used, use caution when moving the cart/apparatus combi

nation to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unuse

d for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the app

aratus has been damaged in any way, such as power-supply cord or plug is damag

ed, liquid has been moisture, does not operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED
SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO.

16.

Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 po
wer source only.

CE COMPLIANCE STATEMENT

p

WARNING

This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

FCC COMPIANCE STATEMENT

FCC INFORMATION : This equipment has been tested and found to comply

with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct
the interference at his own ex

CAUTION : Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du

Canada.

ense.

3

CONTENTS OF PACKAGE

Installation of the camera must be performed by qualified service personnel in
accordance with all local and national electrical and mechanical codes.

Carefully remove the color camera and its accessories from the carton and verify that
they were not damaged in shipment.

The content of the package includes:

1. Color CCD camera

2. Mini-DIN connector (for video-or dc-type auto-iris lens)

3. CS adapter ring for C mounting "C" lenses

4. This manual

TABLE OF CONTENTS

INTRODUCTION --------------------------------------------------------------------------------------- 5

CAMERA OVERVIEW -------------------------------------------------------------------------------- 6

CAMERA ADJUSTMENT ---------------------------------------------------------------------------- 8

CONTROL AND CONNECTIONS / DAY&NIGHT I/O TERMINALS----------------------- 17

LENS ----------------------------------------------------------------------------------------------------- 18

SPECIFICATIONS ------------------------------------------------------------------------------------- 19

4

INTRODUCTION

The camera provided high-quality image using SONY 1/3” CCD and digital signal
processing LSIs.

Features:

z 1/3" Super-HAD CCD
z Super high-resolution (700TVL)
z Wide Dynamic Range (~x512) (Optional)
z Day & Night(Auto, Manual, External, Filter delay, Change level adjust)
z 0.1Lux(Color), 0.01 Lux(BW), 0.0001 Lux(Sens-Up B/W) @ F1.2 50IRE
z Auto Electronic Shutter [1/50(60) ~ 1/100,000] and manual electronic shutter

modes [1/50(60) ~ 1/10,000]

z Sens-Up (~x256)
z 2D-NR, 3D-NR
z UDF Function(Ultra Deep Field)
z Multi Camera Configuration Set (4-Sets/Night Profile, Ext DN Profile)

z PVA/PVA+ (Personal Video Analytics)

 Very High Configurable.
 Various Detection Methods(Motion, Loitering Object, Abandon, Scene

Change, Unfocus, Windy Area)

 Various Zone Event Detection Methods, and Event Area Combinations.
 8 Objects Trace, 4 Objects Display

 Concurrent Processing with All Detections, and All Objects.

 Two Counting Block.
 Event String Sending (Editable String)
 Digital Tracking(Using D-PTZ)

 Various Detection Area(MAX. 10 area, Line, Rectangle, 4-Point polygonal)
z Back Light Compensation (EHLC, Auto, Spot)
z i-Freeze Function(Reduce recording space)
z Privacy Mask or Mosaic(MAX. 10 area/4-point polygonal/transparency)
z Digital Image Stabilization.
z Digital PTZ
z Digital Effect (H/V reverse, 180 degree rotate, inverse, freeze)
z White Pixel Removal.
z Focus Aid Function.
z Color Rolling Suppression.
z System Lock (4-character password)
z C/CS, back-focus cam for easy adjustment
z Auto and Manual white balance modes
z Support Line-Lock external synchronization
z RS-485 Remote camera control
z Multi-Language
z Compatible with Video, DC type lenses with OSD select
z Quick connect for Video or DC lens with 4-pin connector
z User Certified / Listed Class 2 power source only

5

CAMERA OVERVIEW

TOP VIEW

n Left Button
o Up Button
p Enter Button

SIDE VIEW

FRONT VIEW

q Right Button

REAR VIEW

r Down Button
s Day / Night External I/O

Motion ALARM OUT
RS-485 / UTP(optional)

t Power Indicator
u Video Output Connector (BNC)
v UTP or BNC Transformation Switch

(optional)

w AC/DC Compatible Input Terminal

AC Power Cord

REAR VIEW (Free Voltage)

6