Revent 726 Specifications
726 Single Rack Oven
Available in gas, oil or
electrically heated models.
Maximum tray size:
500 x 800 mm – one single rack
The unique technology in a Revent
oven will take your baking quality
to an even higher level.
Revent TCC System (Total Convection Control)
Revent HVS System (High Volume Steam)
726 U K 071109
Standard features
> Revent TCC System
> Revent HVS System
> Revent LID System
> Revent Cross Line Heat Exchanger
> Revent Wedge Installation System
> Stainless Steel Design
> IAC (InterActive Control) Panel
> Automatic Steam and Damper Control
> Double glass door
Utility Requirements
Electrical
> Electrical: available in 3-phase voltages
Water and Drain
> Water Supply: G ½”ø 4,5 kg/cm² (450 kPa)
> Drain: 1” connection
(optional connection to rear)
Ventilation
> Over Pressure Duct:
Through door to canopy
> Oven Damper Exhaust:
Through door to canopy
> Oven Stack Exhaust: 133 mm ø
(oil and gas versions only)
> Canopy Port: 252 mm ø
726 Electrically heated
Voltage
3PH220–230V
3PH400/230V
3PH415/240V
726 Oil/gas heated
Voltage
3PH220–230V
3PH400/230V
3PH415/240V
Heating
39-43kW
43kW
41kW
Heating
50kW
50kW
50kW
Fuse
125A
80A
80A
Fuse
16A
16A
16A
Technical information
> Maximum Heat Capacity:see table below
> Temperature range: 50–300 ºC
> Total shipping weight: 1100 kgs*
> Minimum intake opening: 815x1420 mm
(standard 3 section delivery)
> Minimum intake opening: 1400x2500mm
(optional - one piece shipment)
> Minimum section tilt up height: 2650mm
> Swing diameter: 950 mm
> Max load of racklift and platform 200 kg
> Steam Generation 4.5 l/20 sec
> Installation requirements: The oven must
be installed on a levelled, non-combustible
floor. The oven may be installed flush
against any wall - only the front and
top need to be left open for access. The
space on top of the oven must be well
ventilated and the temperature must not
exceed 50° C. This is to avoid damage to
electrical components.
*Final shipping
Weights will depend on the final order specifications.
Contin uous product devel opment is a Revent
policy. Therefore, we reserve the right to change
specifi cations and/or de sign without prio r notice.
Picture s or drawings may include pro duct options.
Revent sales representive:
Revent International AB
PO Box 714, SE 194 27 Upplands Väsby, Sweden
Phone +46 8 590 006 00, fax +46 8 590 942 10
E-mail info
revent.se, www.revent.com
@
Loading...