Revent 723 User Manual
723 DOUBLE Rack
OvEn
Available in gas, oil or electrically heated models.
Accepts:1 double rack with pan size 31.5”x23.6”
(European std, 800*600 mm) Swing diameter 63”
Revent’s line of innovative baking technology is made to
take any bread to the highest level. In bread we trust.
Revent TCC System (Total Convection Control)
Revent HVS System (High Volume Steam)
723 US 120425
WIND PROOF FLUE CAP
ALL DUCT WORK
SEALED AGAINST ROOF
DRAFT INDUCTION FAN
C/W AIR PROVING SWITCH
Ø10" BAROMETRIC DAMPER
WATER CONNECTION 1/2"
100,6"
50"
DRAIN 1"
10" TYPE METAL VENT
5,8"
40.5"
17.8"
30"
DOOR OPENING
102"
EVACUATION EXHAUST
MIN RECOMMEND. EVAC.1400 CFM
ROOF
CEILING
1" REAR DRAIN
88.5"
68
EL CONN
O/G CONN.
19,4"
"
56
AIR INLET (NOT TO BE CONNECTED)
SMOKE EXHAUST Ø9,5"
ONLY O/G CHIMNEY
EXTHAUST.
NEEDED EVAC.221 CFM
11"
""80
96"
63"
79,2"
116,4"
REVENT RACK OVEN 723 USA
701196 B
Standard features
> Revent TCC System
> Revent HVS System
> Revent LID System
> Revent Cross Line Heat Exchanger
> Revent Wedge Installation System
> Stainless Steel Design
> GIAC (Graphic InterActive Control) Panel
> Automatic Steam and Damper Control
> Double glass door
Utility Requirements
Gas
> Natural Gas: Indirect fired 1” drop to ¾”
NPT connection
> Liquid Propane: Indirect fired ¾” drop to
¾” NPT connection
Water and Drain
> Water Supply : ½” NPT ø 60-65 PSI cold
> Drain: 1” NPT, optional connection to rear
Ventilation
> Over Pressure Duct:
Through door to canopy
> Oven Damper Exhaust:
Through door to canopy
> Canopy Port: 9.9” ø
> Smoke Exhaust : 6.7” ø gas and oil only
723 Oil/gas heated
Voltage
3PH208–220V+N
3PH440–480V
+ 1 PH 115V
723 Electrically heated
Voltage
3PH208–220V+N
3PH440–480V
+ 1 PH 115V
NOTE:
Other voltages available, check with factory.
Limited warranty, one year parts+labor
Heating
477700 btuh
477700 btuh
Heating
60+52,5 kW
60+52,5 kW
Fuse
45A
20A
Fuse
200+200A
100+100A
Technical information
> Maximum Heat Capacity:see table below
> Temperature range: 95-572 ºF
> Total shipping weight: 6526 lbs*
> Minimum intake opening: 40.4” x 79.5”
(standard 3 section delivery)
> Minimum intake opening: 79.5” x 102.4”
(optional – one piece shipment)
> Minimum section tilt up height: 122.1”
(without motor)
> Swing diameter: 63”
> Max load of platform 1323 lbs
> Steam Generation 2.9 gals/20sec at 482°F
> Installation requirements: The oven must
be installed on level noncombustible floor.
The oven may be installed flush against a
wall - only the front and top need to be left
for access. The space on top of the oven must
be well ventilated. The temperature may
not exceed 120°F to avoid damage to electric
components.
*Final shipping
Weights will depend on the final order specifications.
Continuous product development is a Revent
policy. Therefore, we reserve the right to change
specifications and/or design without prior notice.
Pictures or drawings may include product options.
Revent sales representive:
Revent Incorporated
100 Ethel Road West, Piscataway, New Jersey 08854
Phone (732) 777-9433, Fax (732) 777-1187
Toll Free 800-822-9642
E-mail info@revent.com, www.revent.com
Loading...