REVELL Ultima Gem, Ultima Salon, Ultima Studio, Ultima2 Salon2, Ultima2 Studio2 Owner's Manual

Harman Specialty Group
3 Oak Park Drive
Bedford, MA 01730-1413 USA
Tel [phone]
Fax [phone]
www.revelspeakers.com

Customer Service
Telephone: [phone]
Sales Fax: [phone]
Service Fax: [phone]
Product Shipments:
HSG/Revel
Returns Dept.
RMA #
801 S. 75th Avenue
Phoenix, AZ 85043

Part No.354898-001 | Rev 1 | 12/07

“Revel,” “Ultima Salon,” “Ultima Voice”,” Ultima Studio,” “Ultima Gem,” and the Revel logo are trademarks or registered trademarks of
Harman International Industries, Inc. U.S. patent numbers and other worldwide patents issued and pending.

©2007 Harman International Industries, Inc. All rights reserved.

This document should not be construed as a commitment on the part of Harman Specialty Group. The information it contains is subject to
change without notice. Harman Specialty Group assumes no responsibility for errors that may appear within this document.

Loudspeaker

Owner’s Manual

Revel

®

Ultima Salon® 2 - Ultima Studio® 2

Introduction Ultima Salon2/Studio2

DOCUMENTATION CONVENTIONS

This document contains general safety, installation and operation instructions for the REVEL Ultima Salon2/Studio2 Speakers. It is important to
read this user guide before attempting to use the product. Pay particular attention to safety instructions.

The following symbols are used in the document:

Appears on the component to indicate the
presence of uninsulated, dangerous voltage
inside the enclosu

re – voltage that may be

sufficient to constitute a risk of shock.

Appears on the component to indicate
important operating and maintenance
instructions in the accompanying literature.

Calls attention to a procedure, practice,
condition or the like that, if not correctly
performed or adhered to, could result in injury
or death.

Calls attention to a procedure, practice,
condition or the like that, if not correctly
performed or adhered to, could result in
damage or destruction to part or all of the
product.

Calls attention to information that is essential to
highlight.

WARNING

CAUTION!

Note:

Ultima Salon2/Studio2
Owner’s Manual

1

Table of Contents

ABOUT REVEL . . . . . . . . . . . . . . . . . . . . . . . 3

About Revel Ultima2 Loudspeakers . . . . . . . . . . . . . . . 3

About the Salon2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

About the Studio2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Product Registration. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . 4

LOUDSPEAKER OVERVIEW. . . . . . . . . . . . . 6

Salon2 Driver Complement . . . . . . . . . . . . . . . . . . . . . . 6

Studio2 Driver Complement . . . . . . . . . . . . . . . . . . . . . 6

Cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Rear Door Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Filter Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

INSTALLATION CONSIDERATIONS . . . . . 10

Loudspeaker Accuracy. . . . . . . . . . . . . . . . . . . . . . . . . 10

Loudspeaker Placement. . . . . . . . . . . . . . . . . . . . . . . . 10

Listening Room Acoustics. . . . . . . . . . . . . . . . . . . . . . 11

Acoustic Treatment Materials . . . . . . . . . . . . . . . . . . . 12

Combination Spikes/Glides . . . . . . . . . . . . . . . . . . . . . 12

MAKING CONNECTIONS . . . . . . . . . . . . . 13

Single Wire Connections. . . . . . . . . . . . . . . . . . . . . . . 15

Bi-Wired Connections. . . . . . . . . . . . . . . . . . . . . . . . . 16

Vertical Bi-Amplified Connections. . . . . . . . . . . . . . . 17

Horizontal Bi-Amplified Connections. . . . . . . . . . . . . 18

OPTIMIZING PERFORMANCE . . . . . . . . . . 19

Loudspeaker Volume Level. . . . . . . . . . . . . . . . . . . . . 20

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . 21

Salon2 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . 21

Studio2 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . 23

Salon2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Studio2 Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . 25

OBTAINING SERVICE . . . . . . . . . . . . . . . . 26

Product Shipment Directions: . . . . . . . . . . . . . . . . . . . 26

Ultima Salon2/Studio2

Owner’s Manual

2

Ultima Salon2/Studio2
Owner’s Manual

3

Congratulations and Thank You for purchasing your new Revel
Ultima Salon® 2 or Studio® 2 Loudspeakers. Please take the time
to read the following installation and setup informatation in
order to optimize your enjoyment of your new loudspeakers.

ABOUT REVEL

Since 1996, Revel has stood at the forefront of loudspeaker design
and performance. Backed by Harman International’s world
leading research and design facilities, Revel loudspeakers benefit
from cutting-edge resources such as:

•Multiple large anechoic chambers which allow for

precise testing and measurements.

•A multi-channel listening lab for double-blind, position

independent listening tests.

•A laser interferometer that enables detailed driver and

cabinet analysis.

• Finite element analysis, utilized for advanced

loudspeaker modeling.

•A stereo lithography apparatus, which rapidly “builds”

tooled parts.

ABOUT REVEL ULTIMA2 LOUDSPEAKERS

The Revel Ultima2 Series Loudspeakers exemplify subtle elegance
with their smooth, rounded shapes, easily blending into a wide
variety of decors. Available in either a high-gloss mahogany
veneer or high-gloss black finish, the Revel Ultima2 Loudspeakers
will be a welcome compliment to any fine home. The elegant
shape extends to their magnetically attached grilles, which
eliminates the need for any unsightly attachment hardware. The
acoustically optimized baffles offer eye-pleasing shapes when the
loudspeakers are used without their gilles. In fact, the complex
computer designed baffles drastically reduce diffraction. Such
unparalleled freedom from diffraction is a major contributor to

the standard-setting acoustic performance of the Ultima2 Series
Loudspeakers. The attractive rounded shape of the loudspeaker
cabinet design contribute to their superb off-axis response while
their single-piece, nine-layer construction results in an extremely
inert enclosure.

New transducers were designed from “the ground up” specifically
for the Ultima2 Series. Featuring dual neodymium magnetic
motor systems with sophisticated distortion reduction
mechanisms, titanium diaphragms, and oversized voice coils, the
Ultima2 Series woofers and mid-ranges represent the cutting edge
in transducer design. The new 1-inch tweeter, common to all four
Ultima2 Series loudspeakers, sets the standard for breathtaking
transparency and low coloration with its pure beryllium dome
and third-generation waveguide.

Using advanced CAD modeling and testing resources, Revel has
achieved demonstrably superior sound quality. Our unique
double-blind listening test facilities prove their superiority over all
competitors and Revel’s development process goes well beyond
proving superior performance. An exclusive “tuning” process is
used in producing each and every Ultima2 series loudspeaker,
matching its performance to the original reference prototype to
within a fraction of a decibel. Music and cinema sound lovers can
rest assured that their Ultima2 series loudspeakers sound as great
as the laboratory reference.

ABOUT THE SALON2

The Revel Ultima Salon2 is the highest expression of Revel
technology and performance in loudspeaker design and achieves
previously unmatched performance. Offering an elegant,
designer-friendly appearance and unparalleled sound quality,
the Salon2 is a floorstanding four-way system with three 8-inch
woofers, a 6.5-inch mid-woofer, 4-inch midrange and 1-inch
tweeter. Its sophisticated design even extends to the cast
aluminum input and control panel, which is hidden from view,
yet easily accessible.

Ultima Salon2/Studio2

Owner’s Manual

4

ABOUT THE STUDIO2

The Revel Ultima Studio2 is a floorstanding design featuring all
of Revel’s latest technological innovations and enhancements
which offers a designer-friendly elegant appearance and
unparalleled sound quality. A three-way system utilizing two 8­inch woofers, a 5.25-inch midrange and a 1-inch tweeter, the
Studio2 features the graceful look of the new Ultima2 series. Its
somewhat smaller size makes it ideal where space is limited but
uncompromised performance is required. Their elegant design
even extends to their cast aluminum input and control panels,
which are hidden from view, yet easily accessible.

PRODUCT REGISTRATION

Please register the Salon2/Studio2 within 15 days of purchase. To
do so, register online at the www.revelspeakers.com website or
call Harman Specialty Group Customer Service. Retain the
original, dated sales receipt as proof of warranty coverage.

WHAT’S IN THE BOX

• (1) Salon2 or Studio2 Loudspeaker

• (4) 2.25-inch (57mm) Combination Spikes/Glides

• (4) Locking Rings

• (4) Felt Washers

• (1) Grille

• (1) Salon2/Studio2 Owner’s Manual

• (2) Spare Rear Door Washers

UNPACKING

The Salon2/Studio2 requires special care and handling during
unpacking. Pay particular attention to the precautions that
appear in this section and throughout this owner’s manual.

To unpack the Salon2/Studio2 Loudspeaker you must have at
least two people. The procedure for unpacking the Salon2 and
Studio2 Loudspeakers is similar. Please use the following
instrctions for both loudspeakers. To unpack the loudspeaker
perform the following steps:

1. Place the loudspeaker carton in an upright position, as
indicated by the “This End Up” indications on the carton.

2. Open the flaps as shown in Figure 1, Step 1, on the next
page.

3. Without allowing the flaps to close invert the carton onto a
carpeted area or soft cloth so that the open flaps of the box
are on the bottom. Be careful to keep the loudspeaker within
the box as you are tilting it onto the floor.

4. Lift the box off the loudspeaker and place it aside, Figure 1,
Step2.

5. Carefully lift the loudspeaker into an upright position and
then remove the foam packing strips from the top. Remove
the two center sections of packing foam by carefully sliding it
up, and off the loudspeaker. Use caution to avoid damaging
the transducers while removing the foam packaging.

Warning

Do not attempt to lift or move the Salon2/Studio2 alone.
Proper lifting requires at least two strong people. When
lifting the Salon2/Studio2 keep your back as straight as
possible using the leg muscles to lift. Failure to follow
these procedures may result in personal injuries and/or
loudspeaker damage.

Ultima Salon2/Studio2
Owner’s Manual

5

6. Tilt the cabinet forward and remove the bottom pad, using
caution to avoid touching the tweeter or midrange, Figure 1,
Step 3.

7. Carefully remove the tape from the red protective tweeter
cover.

8. We recommend installing the spikes/glides after determining
final speaker placement. Refer to the “Combination spikes/
glides” section or more info.

After unpacking the unit, carefully inspect the contents. If you
discover any damage, immediately contact your Revel dealer for
further assistance. To move an unpacked loudspeaker, rock it
side-to-side into place, using caution to avoid touching the
tweeter and midrange.

Keep all packing materials for future shipping.

In the unlikely event a product will need repair. Revel will only
accept a unit in its original shipping carton. Using any other
packing materials may result in damage to the product and will
void the warranty. See Service Information for additional details.

Figure 1: Unpacking Instructions

Caution

Use caution not to touch or allow any object or liquid to come
in contact with the Beryllium tweeter dome. Variations in its
finish are normal. Any attempt to clean the tweeter dome will
result in damage, which is not covered under the limited
warranty.

1

2

3

2

Ultima Salon2/Studio2

Owner’s Manual

6

LOUDSPEAKER OVERVIEW

SALON2 DRIVER COMPLEMENT

The numbers in Figure 2 on the next page correspond with the
numbered items below.

1. (1) 1-inch (25mm) Beryllium tweeter

2. (1) 4-inch (102mm) midrange

3. (1) 6.5-inch (165mm) mid-woofer

4. (3) 8-inch (203mm) woofers

STUDIO2 DRIVER COMPLEMENT

The numbers in Figure 3 on the next page correspond with the
numbered items below.

1. (1) 1-inch (25mm) Beryllium tweeter

2. (1) 5.5-inch (140mm) midrange

3. (2) 8-inch (203mm) woofers

CABINET

The Revel Salon2/Studio2 Loudspeakers exemplify subtle
elegance with their smooth, rounded shapes, which easily blend
in with a wide variety of decors. Available in either a high-gloss
mahogany veneer or a high-gloss black finish, the Salon2/
Studio2 Series Loudspeakers will be a welcome compliment to
any home. The Salon2/Studio2 reduces cabinet-induced
colorations with 1-inch (25mm) thick walls and extensive
internal bracing. Adjustable combination spikes/glides can be
attached to the bottom of the cabinet stands for optimal stability,
accommodating installations on tile, hardwood, and carpeted
floors.

The cabinet’s wood veneer finish does not require routine
maintenance. Cabinet surfaces that have been marked with
dust, fingerprints, or other dirt can be cleaned using a soft cloth
and high-quality wax.

• To clean the cabinet, apply furniture polish to a soft cloth

then use the cloth to lightly wipe the cabinet surface. Use
care to avoid coming into contact with the tweeter dome or
any of the other drivers.

• To clean the grille, gently vacuum using a soft-bristled

brush vacuum attachment.

REAR DOOR PANEL

The Salon2/Studio2 comes with a pre-installed rear panel door.
To connect a speaker cable:

• Open the door by pressing the “finger berm” on the left side
of the door.

• Determine the rear panel configuration that is suitable for
your installation and attach the speaker cable. (Refer to the
“Making Connections” section for more information.)

• Align the cable so that it fits within the center bottom
channel of the door.

• Close the door by pressing on the “finger berm” on the left
side of the door. Ensure that the door closes completely, and
does not crimp or jam on any of the cables.

Caution

Use caution not to touch or allow any object or liquid to come
in contact with the Beryllium tweeter dome. Variations in its
finish are normal. Any attempt to clean the tweeter dome will
result in damage which is not covered under the limited
warranty. To prevent cabinet damage, do not use a cloth made
with steel wool or metal polish to clean the cabinet. To prevent
possible transducer damage, do not apply furniture polish
directly to the cabinet or tranducers.

Ultima Salon2/Studio2
Owner’s Manual

7

Figure 2: Salon2 Loudspeaker Figure 3: Studio2 Loudspeaker

1

1

2

3

4

1

1

2

3

1