REVELL SA1000 Owner's Manual

SA1000 Subwoofer Amplifier

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding­type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by
the manufacturer or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long
periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, or the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.

15. Do not expose this apparatus to dripping or splashing and ensure that no
objects filled with liquids, such as vases, are placed on the apparatus.

16. The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.

17. WARNING: Apparatus shall be connected to a MAINS socket outlet with a
protective earthing connection.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.

Warning: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to qualified personnel.

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature
accompanying the product.

WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Operating Temperature
35˚C.

TABLE OF CONTENTS

About Revel® ................................................................. 2

About Your Revel

Product Highlights .................................................... 3

What’s In The Box ..................................................... 3

Unpacking...................................................................... 3

Front Panel Layout......................................................... 3

Rear Panel Layout ......................................................... 4

Connections .............................................................. 4

Equalization .............................................................. 4

Installation .................................................................... 5

Cooling Requirements ................................................... 5

Connections/Amplifier .................................................. 5

Configurations/Wiring................................................... 6

Troubleshooting .............................................................7

Specifications ................................................................ 7

Warranty ....................................................................... 8

2

®

SA1000 Subwoofer Amplifier .... 3

Congratulations and Thank You for purchasing your new REVEL

®

SA1000

Subwoofer Amplifier.

Please take the time to read the following installation and setup
information in order to optimize your the performance of your amplifier
and architectural subwoofer system.

ABOUT REVEL

®

Since 1996, REVEL® has stood at the forefront of loudspeaker design
and performance. Backed by Harman International’s world leading
research and design facilities, REVEL

®

loudspeakers benefit from

cutting-edge resources such as:

• Multiple large anechoic chambers which allow for precise testing
and measurements.

• A multi-channel listening lab for double-blind, position independent
listening tests.

• A laser interferometer that enables detailed driver and cabinet
analysis.

• Finite element analysis, utilized for advanced loudspeaker modeling.

• A stereo lithography apparatus, which rapidly “builds” tooled parts.

SA1000 Subwoofer Amplifier

Owner’s Manual

ABOUT YOUR REVEL® SA1000 SUBWOOFER AMPLIFIER

The SA1000 subwoofer amplifier is a high efficiency Class D
amplifier specifically designed to be used in conjunction with REVEL
Architectural subwoofers. It is optimized to give the best dynamics
and frequency response of REVEL

®

Architectural subwoofers, and is

®

specifically designed to drive their highly reactive load impedances.

NOTE: The EQ and headroom management have been specifically
designed for REVEL

®

Architectural subwoofers! Use of the
SA1000 with any other subwoofers could lead to damage of the
subwoofer or the SA1000 amplifier. Contact your dealer or visit
www.revelspeakers.com for the latest list of models that can be
safely used with your SA1000 amplifier.

PRODUCT HIGHLIGHTS

• Wide dynamic range

• Low distortion and low noise

• 2 EQ modes (Customized for in-wall and in-ceiling subwoofers)

• User-adjustable Single-band PEQ (Room Equalization)

• Automatic Turn-On (detecting signal presence) and Turn-Off after 10
minutes with no signal

• Short-circuit and over-current protection

• Over-temperature compensation

• Two dual-banana output connectors for easy installation and
connection to REVEL

®

Architectural in-wall or in-ceiling subwoofers

(Maximum of 2 subwoofer modules per amplifier)

WHAT’S IN THE BOX

• 1 x SA1000 Subwoofer Amplifier

• 2 x Rack Mount brackets

• 4 x Screws for installing rack mount brackets

• 1 x SA1000 Owner’s Manual

• 1 x Power Cord

UNPACKING

Carefully unpack the amplifier and accessories. If you suspect damage
from transit, report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.

WARNING: Before you start to set up your amplifier, make sure
you read and observe the Important Safety Instructions found at the
beginning of this manual.

FRONT PANEL LAYOUT

1 2

Figure 1: Front-panel controls and indicators

1. Power LED

The Power Indicator LED identifies the current state of the SA1000
amplifier. The amplifier has three different powered states:

• Red: Standby – the SA1000 automatically enters Standby if no signal
is detected from the system for 10 minutes.

• Green: On – the SA1000 turns on to the “On” state, or when a signal
is detected.

• No Light: Off - the AC mains power switch is in the off position or the
SA1000 is unplugged.

2. Volume Control

Adjusts the volume level of the amplifier.

SA1000 Subwoofer Amplifier
Owner’s Manual

3