REVELL B-25 SSP User Manual [en, fr, nl, it, gr, da, no, fi, sv, es, pt, de, en, hr, et, fi, hu, lv, lt, nl, pl, ro, ru, sr, sk, sl, cs, tr, gr, bg, uk, ch, he, ar, ja, ch, ch, ko, hi, id, kk, ms, fa, pt, es, th, vi, sq, mk]
Page 1
The North American B-25 Mitchell
bomber had a wingspan of 67'
7". Fuselage length was 52' 11".
Normally during WWII this version of
the B-25 carried four .50 cal. machine
guns in two revolveing turrets and
one in the nose. The aircraft flown
in the famous Doolittle raid had their
lower turrets replaced by additional
fuel tanks and two "dummy broomstick guns" extended from the tail to
discourage attack by enemy aircraft.
The markings on your Revell Doolittle
Raider B-25 bomber represent those
used on the actual plane that Lt. Col.
Doolittle flew himself during the raid.
Your Revell B-25 Mitchell bomber
model includes revolving turrets and
elevating guns, realistic details and
authentic waterslide decal markings.
KIT 0216 85021600200
B-25 BOMBER
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be marked by
a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash the plastic
parts in a mild detergent solution. Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and slide
backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal adhesion
and will dry clear. Wipe away any excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before applying clear
coat.
NOTE: Decals are compatible with
setting solutions or solvents.
* APPLY STICKERS
*APPLIQUEZ LES AUTO-COLLANTS
* OPTIONAL PARTS
* PIECES EN OPTION
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont marquées d'une étoile
(★) pour indiquer qu'elles sont en plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants, laver les pièces
en plastique avec une solution détergente peu concentrée. Les rincer et
les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à améliorer
l'adhésion de l'autocollant et devient incolore au séchage. Essuyer pour
enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant d'appliquer
une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
This paint guide is provided to
complete this kit as shown on the box
Ce guide de peinture est fourni pour reproduire le
modèle réduit qui apparaît sur la boîte.
Semi Gloss Black
Flat Black
Zinc Chromate
Silver
Flat Yellow
Red
Flat Gray
Tan
Flesh
Flat Brown
Noir satine
Noir mat
Vert de zinc
Argent
Jaune mat
Rouge
Gris mat
Havane
Chair
Brun mat
.
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85021600200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2008. All rights reserved.
Page 2
1
deck / turrets / gunner AsseMBLY
SEE PAINT NOTE:
7
PILOT
semi gloss
black
13
RIGHT
FUSELAGE
FlaT brown
semi gloss black
(piloT & co-piloT)
FLIGHT DECK
zinc chromaTe
CO - PILOT
zinc
chromaTe
seaT
8
4
5
7
TOP TURRET
BLISTER
clear
1
TURRET HUB
TWIN TURRET
TOP TURRET
zinc chromaTe
16
LEFT
FUSELAGE
FlaT brown
GUNS
semi gloss
black
2
BASE
NOSE GEAR
14
NOSE WHEEL
wheel - FlaT black
cenTer - silver
SEE PAINT NOTE:
semi gloss black
semi
gloss
black
15
silver
43
TURRET
COVER
9
NOSE
GUNNER
10
NOSE FLIGHT
DECK
zinc chromaTe
1
TURRET HUB
3
BOTTOM
TURRET BASE
zinc chromaTe
6
BALL TURRET
BLISTER
clear
PAINTING NOTE FOR FIGURES:
PILOT AND GUNNER: HELMETS, YELLOW
CO-PILOT: HELMET, RED
ALL: UNIFORMS, TAN. HANDS AND FACE,
FLESH, GOGGLES, BROWN ,BOOTS, BLACK
TWIN TURRET GUNS
4
semi gloss black
12
NOSE GUN
semi gloss black
Kit 0216 - Page 2
11
LOWER NOSE
SECTION
FlaT brown
IF YOU WISH TO OUTFIT YOUR MODEL FOR CARRIER OPERATIONS
NOTE:
- AS THE PLANES FLOWN ON DOOLITTLE'S RAID - OMIT
INSTALLATION OF LOWER TURRET ASSEMBLY AND CEMENT PART
43 INTO POSITION AS SHOWN ABOVE
Page 3
2
19
INSIDE HALF
MAIN WHEEL
FLAT bLAck
LEFT WING
21
LEFT WING
BOTTOM
FLAT GrAy
wheel / propeller / wing assembly
seMi
GLoss
bLAck
PROPELLER
seMi
GLoss
bLAck
NACELLE CONE
FLAT browN
(FLAT GrAy oN
17
siLver
FLAT
yeLLow
25
boTToM)
26
LEFT
MAIN GEAR
siLver
24
LEFT
NACELLE
FLAT GrAy
20
OUTSIDE HALF
MAIN WHEEL
FLAT bLAck
siLver
23
LEFT WING
TIP
FLAT browN
FLAT GrAy
(oN boTToM)
FLAT yeLLow
1
TURRET HUB
18
ENGIINE
COWLING
FLAT browN
27
MAIN GEAR DOOR
FLAT GrAy
ziNc chroMATe (iNside oNLy)
siLver
COMPLETED
WHEEL
22
LEFT WING
TOP
FLAT browN
RIGHT WING
32
RIGHT
MAIN GEAR
siLver
28
RIGHT WING
BOTTOM
FLAT GrAy
31
RIGHT
NACELLE
FLAT GrAy
RIGHT WING
FLAT browN
29
TOP
COMPLETED
25
NACELLE CONE
FLAT browN
FLAT GrAy
(oN boTToM)
WHEEL
COMPLETED
ENGINE
COMPLETED
ENGINE
27
MAIN GEAR DOOR
FLAT GrAy
ziNc chroMATe
(iNside oNLy)
30
RIGHT WING
TIP
FLAT browN
FLAT GrAy
(oN boTToM)
Kit 0216 - Page 3
Page 4
3
PAINT
CANOPY
FRAMES
FLAT
BROWN
40
NOSE CANOPY
cLeAR
wing / tail / canopy assembly
35
HORIZONTAL
STABILIZER
FLAT bRoWn
FLAT GRAY on
boTTom
FLAT GRAY
undeRside onLY
FLAT
bLAck
39
CANOPY
cLeAR
FLAT
bLAck
WING SHOWN
IN PLACE
33
RIGHT RUDDER
FLAT bRoWn
FLAT bLAck
FLAT bLAck
34
LEFT RUDDER
FLAT bRoWn
FORWARD NOSE GEAR DOOR
zinc chRomATe (inside onLY)
41
FLAT GRAY
4
OBSERVATION BLISTER
1
UNDER
WING
3
42
NOSE GEAR DOOR
FLAT GRAY
zinc chRomATe (inside onLY)
FLAT
bLAck
decal / final assembly
38
cLeAR
37
ANTENNA
FLAT bLAck
1
5
1
36
TAIL CONE
semi GLoss
bLAck
5
Kit 0216 - Page 4
4
(REPEAT FOR
OTHER SIDE)
2
UNDER WING
Loading...