ResMed Disposable Masks and Circuits User Manual

PRODUCT CODE

ResMed Hospital Full Face Mask (vented)

Small 60703
Medium 60704
Large 60705
Headgear (10 per pack) 60710

ResMed Corp Poway, CA, USA [phone] OR 1 800 424 0737 (toll free), ResMed Ltd, 1 Elizabeth MacArthur Drive Bella Vista NSW 2153 Australia [phone] or 1 800 658 189 (toll free). Offices in Austria,
Brazil, Finland, France, Germany, Hong Kong, Japan, Malaysia, Netherlands, New Zealand, Singapore, Spain, Sweden, Switzerland, United Kingdom (see website for details). Hospital Full Face Mask protected by patents:
AU 744593, AU 775051, CA 2261790, EP 0956069, EP 1187650, US 6112746, US 6357441, US 6374826, US 6513526, US 6581602, US 6634358, US 6701927, US 7069933. Other patents and design registrations pending.
Hospital Nasal Mask patents and design registrations pending. Mirage is a trademark of ResMed Ltd and registered in U.S. Patent and Trademark Office. ©2006 ResMed Ltd. Specifications may change without notice.
1010626/2 06 07

ResMed Hospital Nasal Mask (vented)

Medium 61106
Large 61107
Headgear (10 per pack) 61118

Global leaders in sleep and respiratory medicine www.resmed.com

ResMed Hospital Universal Disposable
Bilevel Circuits

Universal Disposable
Bilevel Circuit with filter (10 per case) 21952

Universal Disposable
Bilevel Circuit (10 per case) 21953

Disposable Masks and Circuits

Quick to fit. Effective to use.

ResMed, a leading global supplier of masks, has developed a line of custom-designed products for hospital use.

Quick to fit and easy to use, ResMed’s disposable masks and circuits provide cost-effective, time-saving solutions for the clinical environment.
Ideally suited for CPAP, bilevel pressure treatment and noninvasive ventilation therapy.

ResMed Hospital Full Face Mask

™

The proven comfort and seal of ResMed’s Mirage
mask is available in three sizes—small, medium and large—providing a comfortable fit for a wide range of patients. Designed for single
patient use, the masks can be easily discarded, eliminating cross-contamination concerns and costs associated with mask disinfection
and sterilization.

Easy to adjust and quick to fit headgear

Offers the ultimate in convenience and
easy setup

360° rotating elbow with swivel

Allows clinician to select most
appropriate tube position

Exhalation vent

Provides effective CO

Pressure port

Single port for measuring pressure

ResMed flow generator setting: Mirage Full Face

washout

2

cushion technology in a hospital mask. Quick to fit and easy to adjust, the full face

Silicone dual-wall cushion

Provides stability and superior
seal, utilizing ResMed’s
Mirage cushion technology

Quick-release headgear clips

Allows quick release of the
mask in an emergency

Anti-asphyxia valve (AAV)

Safety valve automatically opens if the flow generator
pressure fails, allowing the patient to breathe room air

ResMed Hospital Nasal Mask

ResMed's nasal masks are designed for single patient use. They are available in two sizes—medium and large—
providing a comfortable fit for a wide range of patients. The masks can be easily discarded, eliminating cross­contamination concerns and costs associated with mask disinfection and sterilization.

Easy to adjust and quick to fit headgear

Offers the ultimate in convenience and
easy setup

Exhalation vents

Provide effective CO2washout

Pressure port

Single port for measuring pressure

ResMed flow generator setting: Standard

ResMed Universal Disposable Bilevel Circuits

The universal bilevel circuits are designed for single patient use only and may be used with ResMed Hospital full face and nasal masks.
The circuits are available both with a filter (21952) and without a filter (21953). Each circuit is packaged with three additional components.
Please refer to the user’s guide for operating instructions.

Additional components packaged with Bilevel Circuits

360° rotating elbow with swivel

Allows clinician to select most
appropriate tube position

Silicone single-wall cushion

Provides a comfortable,
reliable and effective seal

Port cap

Pressure
sensing
port

Saving
you
money...
saving
you time

So easy to use, so
quick to fit

• Preassembled and
ready to use straight
from the package

• Color-coded labeling
for easy size
identification

• Fitting Guide on
packaging ensures
correct size selection

• Robust one-piece
design—no
assembly required

• Simple and
thoughtful design
with minimal
adjustment points

Comfortable and
effective therapy

• Effective CO

• Reliable therapy

• ResMed sealing

• A broad range of

2

washout

custom-designed
for the clinical
environment

technology provides
optimal comfort,
leak-free seal and
reduction of
pressure sores

cushion sizes offers
a comfortable fit

72” Disposable Bilevel Circuit with filter (21952) 72” Disposable Bilevel Circuit (21953)

96” pressure monitoring tubing

extension tubing and T-assembly

Exhalation vent

Inline exhalation port connector 30” “dual” pressure monitoring