AutoSet™ / AutoSet™ for Her / Elite™ /
Escape Auto™ / Escape
™
POSITIVE AIRWAY PRESSURE DEVICES
H5i™ / H5i™ for Her
HEATED HUMIDIFIER
Quick Setup Guide
English
Info menu
Allows you to
view your sleep
statistics.
LCD screen
Setup menu
Allows you to
make changes
to settings.
Push dial
Turning the dial
allows you to
scroll through the
menu and change
settings. Pushing the
dial allows you to
enter into a menu and
confirm your choice.
Start/ Stop
button
Starts or stops
treatment.
S9 basics
The control panel of your S9 device includes an
LCD screen as well as a Start/Stop button, Push
dial and the Info and Setup menu keys.
Key:
Info
menu
Setup
menu
Push
dial
Start/
Stop
Climate
Control
Heated
tube
Ramp
Humidity
level
Home
Home menu
Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San
Diego CA 92123 USA.
ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide.
S9: Protected by one or more patents: AU 691200, AU 697652, AU 702820, AU 709279, AU 724589, AU 730844, AU 736723, AU 750095, AU 750761, AU 764761, AU
779327, AU 2007252223, CN 200780001837.6, EP 0651971, EP 0661071, EP 0920845, EP 0927538, EP 0934723, EP 1028769, EP 1126893, EP 1144036, EP 1502618, EP
2032857, JP 3580776, JP 3778797, JP 4647786, NZ 504595, NZ 570415, NZ 573921, NZ 577485, US 5704345, US 6138675, US 6240921, US 6363933, US 6367474, US
6425395, US 6502572, US 6591834, US 6675797, US 6745768, US 6817361, US 6988498, US 7040317, US 7100608, US 7537010, US 7866944. Other patents pending.
Protected by design registrations: AU 329025, AU 330142, AU 331272, AU 332891, AU 333858, CN 200830346524.1, CN 200830346526.0, CN 200830346525.6, CN
201030215797.X, EU 1067417, JP 1377401, JP 1377402, JP 1377403, NZ 411762, NZ 413090, NZ 413091, US D629891, US D629892, US D635232, US D635244, US
D635245, US D635654, US D638536, US D638537, US D638933. Others pending.
H5i: Protected by patents: AU 2002233025, CN ZL02804936.5, HK 1065483, JP 4420605, NZ 527088, US 6935337, US 7614398. Other patents pending.
Protected by design registrations: AU 331676, AU 331677, CN 200930203243.5, EU 1720582, JP 1402844, JP 1402845, NZ 413752, NZ 413753, US D626642, US
D627044. Other designs pending.
S9, H5i, ClimateLine, AutoSet, S9 Elite, Escape, Escape Auto and EPR are trademarks of ResMed Ltd. S9, ClimateLine, AutoSet, Escape and EPR are registered in U.S.
Patent and Trademark Office.
© 2011 ResMed Ltd. 368266/3 2011-08
Filling the water tub
1. Slide the latch and lift open the flip lid.
2. Remove the water tub.
3. Fill the water tub (through the center hole) with distilled or deionized water up to the
maximum water level mark (380 mL).
4. Return the water tub to the H5i.
5. Close the flip lid ensuring that it clicks into place.
Global lea ders in sl eep and re spirat ory medicine ww w.resmed.com
368266r3.indd 1 5/08/2011 8:52:15 AM
Adjusting Climate Control
This feature is available only if the ClimateLine™ heated air tubing is connected. You can
adjust the air temperature to find the setting that is most comfortable for you.
1. From your
HOME screen,
turn
until
the CLIMATE
CTRL screen is
displayed in blue.
2. Press
.
The selection is
highlighted in
orange.
3. Turn
until the
temperature that
you require is
displayed.
4. Press
to
confirm your
choice.
Changing your EPR™ setting
This feature is available only if enabled by your clinician. Expiratory Pressure Relief (EPR) is
designed to make therapy more comfortable, by reducing the pressure delivered to your
mask during exhalation.
1. Press . The
SETTINGS screen is
displayed.
2. Turn
until EPR
Level is displayed in
blue.
3. Press
.
The selection is
highlighted in
orange.
4. Turn until the
EPR Level setting
that you require is
displayed.
5. Press
to confirm
your choice.
6. Press
to return to
the HOME screen.
1. Align your H5i with your S9 and push them together until they click into place.
2. Connect the DC plug of the power supply unit to the rear of the S9.
3. Connect the power cord to the power supply unit.
4. Plug the other end of the power cord into the power outlet.
5. Connect one end of the air tubing firmly onto the air outlet.
6. Connect the assembled mask system to the free end of the air tubing.
Notes:
• For more information on assembling your mask see your mask user guide.
• Recommended masks are available on www.resmed.com on the Products page under
Service & Support.
Setup
3
1
2
4
5
6
Adjusting humidity level
Ranging from OFF to 6, you can adjust the humidity level at any time to find the setting that
is most comfortable for you. To adjust your level of humidity:
1. From your
HOME screen,
turn
until
the HUMIDITY
LEVEL screen is
displayed in blue.
2. Press
.
The selection is
highlighted in
orange.
3. Turn
until the
humidity level
that you require
is displayed.
4. Press
to
confirm your
choice.
368266r3.indd 2 5/08/2011 8:52:25 AM
Loading...