ResMed AirFit P10 Cleaning and maintaining

ResMed AirFit P10 Cleaning and maintaining

Cleaning and maintaining your AirFit P10 headgear

As a user of the ResMed AirFitP10 nasal pillows mask, you know how simple its Quickfitelastic headgear is to fit and how easy it slips on and off, even at night in the dark.

It’s important to properly care for your AirFit P10’s Quickfit elastic headgear to maintain its benefits until you’re eligible for a headgear replacement. For best performance, remember to clean your headgear on a weekly basis, use warm water and mild soap and leave it to dry on a flat surface out of direct sunlight. For complete cleaning instructions, see the AirFit P10 user guide.

Headgear don’ts

Don’t overstretch

Don’t hang

Don’t place in direct sunlight

212F

100C

Don’t machine wash/dry

Don’t use boiling water to clean

Performing any of these “headgear don’ts” may negatively affect the longevity of your headgear. Should additional adjustments be needed for your elastic headgear, clips can be found in every AirFit P10 package to ensure you get the right fit and therapy. Remember to replace your mask and mask components on a regular interval, especially if any damage is noticed.

Distributed by ResMed Corp, 9001 Spectrum Center Boulevard, San Diego, CA 92123 USA +1 858 836 5000 or 1 800 424 0737 (toll free). See ResMed.com for other ResMed locations worldwide. AirFit and QuickFit are trademarks and/or registered trademarks of the ResMed family of companies. Specifications may change without notice. © 2018 ResMed. 10110614/1 2018-01

Loading...