Lumnia Compact US - Instruction Manual
This manual is based on the latest information and is provided subject to alteration. We reserve the right to change the construction and/or configuration of the product and versions at any time without obligation.
All rights reserved. No part of this document may be reproduced, stored in a database or any other retrieval system, or published, in any form or way, electronically, mechanically, digitally per photo print or microfilm or any other way without written permission from the author.
1. Safety |
Warning |
SAVE THESE INSTRUCTIONS |
The lamp in this unit produce ultraviolet (UV) light, which |
|
|
|
can cause skin or eye damage if viewed directly for a long |
|
period. Only fit the correct type of UV lamps in the unit. |
|
The unit shall be installed and serviced by individuals with |
|
appropriate qualifications and/or experience in accordance |
|
with national regulations in the country of operation and |
|
installation. |
|
Disconnection from the mains is provided by means of a |
|
supply cord fitted by a plug. Protect the mains cable from |
|
damage. If the mains cable is damaged, do not use the unit. |
|
The cable must be replaced by the manufacturer, its service |
|
agent, or similar qualified persons. |
|
Do not insert foreign objects into the unit. |
|
Do not use an extension cable with this unit. |
WARNING Skin or eye damage may result from directly viewing the light produced by the lamp in this apparatus. To safeguard always ensure installation manual and manufacturers recommendations are followed.
CAUTION Risk of UV exposure. Ensure product is installed to ensure no person is likely to be within 0.5 metres of the unit while illuminated.
AVERTISSEMENT Observer la lumière produite par la lampe de cet appareil sans protection peut causer des dommages cutanés ou oculaires.
Pour des raisons de sécurité, veillez au respect des consignes du manuel d’installation et des recommandations du fabricant.
ATTENTION Risque d’exposition UV. Veillez à ce que le produit soit installé de manière à ce que personne ne se trouve à moins de 0.5 mètre de celui-ci tandis qu’il est allumé.
Caution
Only personnel with appropriate skills and training must install or service this unit.
Do not install this unit in areas where dangerous concentrations of inflammable or explosive substances may be present in the air.
Only install this product indoors in a dry location that is shielded from direct sunlight. Do not install the unit in a barn, stable, or similar location.
Install the cable such a way to prevent the exposition of the cable to UV radiation from UV Lamps.
Children or personnel with reduced physical, sensory or mental capabilities, or personnel who lack experience or knowledge, must not use this unit, unless they are
supervised by a person responsible for their safety. Children must not play with this unit. The appliance is to be kept out of reach of children.
Attention
Users can perform the maintenance tasks described in this document. Users must not perform any other repairs or maintenance.
2. Introduction
The Lumnia Compact unit uses one ultra-violet LED driven lamps that attract flying insects that are then captured on a replaceable glue board. The Compact product is a glue board monitoring device.
While unpacking, check for any signs of shipment damage and, if found, notify both transporter and supplier in writing within eight days of receipt with full details of the damage that has occurred. Retain the equipment and packing materials for inspection. Check that all parts have been received as ordered. Make sure that all packaging is removed from the unit before use.
3. Equipment for Installation
A In the Box: |
B Equipment Required for Install |
1.Lumnia Compact US: 304856
Also includes x1 UV-LED Lamps 304816
2.Drilling Template
3.Screw Fix Kit
4.Lumnia Manual
5.Glue Board (Black) 304858
6.Packaging
7.Outer box and Label
8.Power Cable
A3 drilling template – Supplied in Box Screw Fix Kit – Supplied In Box
Spirit Level advised. – Not Supplied Power Drill - Not Supplied
Masonry Drill Bit Ø6mm - Not Supplied Phillips Screw Driver PH2 – Not supplied
6 |
4 |
|
6
2
3 
6
8
1 
7 
6
4. Installation Instructions:
Connecting the Power Source
DANGER: You must NOT connect the unit into a lighting circuit. WARNING: You must connect the power cable to a standard power socket.
DANGER: SERVICING OF DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing of a double-insulated appliance requires extreme care and knowledge of the system and should be done only by a qualified service personnel. Replacement parts for a double insulated appliance must be identical to those parts in the appliance.
A double-insulated appliance is marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED”. The symbol (square within a square) may also be marked on the appliance.
1. Isolate the electrical supply to the power socket.
2. Check that the mains voltage displayed on the unit label is correct for your supply.
3. Check that the cable and plug connector are not damaged.
Once installed as above and mounted correctly, connect the plug connector for the cable into the power socket.
Loading...