Renkforce FS5020E User guide
Programming Quick Guide
FS5020E
Installation
Make sure that the scanner has the correct cable to plug in
the PC as below described::
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have
scanned the incorrect codes, please scan the “Default”
barcode. This will reset the scanner to its factory
defaults.
Default
READING
SINGLE SCAN
LASER TIMEOUT
MODE
–5 SECONDS
If you want expand laser timeout, please scan
“Single Scan No Trigger + Laser Timeout-x seconds”.
CODE 11 DOUBLE
CHECK - ENABLE
CODE 39 DOUBLE
DOUBLE
CHECK
CODE 39 DOUBLE
CHECK ENABLE
CODE 93 DOUBLE
CHECK - ENABLE
CODE 128 DOUBLE
CHECK - ENABLE
SINGLE SCAN NO
LASER TIMEOUT
–2 SECONDS
CODE 11 DOUBLE
CHECK - DISABLE
CHECK DISABLE
CODE 93 DOUBLE
CHECK - DISABLE
CODE 128 DOUBLE
CHECK - DISABLE
TRIGGER
I2OF5 DOUBLE
CHECK - ENABLE
DOUBLE
CHECK
ID2OF5 DOUBLE
CHECK - ENABLE
MSI DOUBLE
CHECK - ENABLE
UPC/EAN DOUBLE
CHECK ENABLE
REVERSE IMAGE
– ENABLE
IMAGE
In order to read the special barcode in reverse color. (black to
SEND BAR CODE
ID - DISABLE
white and white to black)
CODE ID
I2OF5 DOUBLE
CHECK - DISABLE
ID2OF5 DOUBLE
CHECK - DISABLE
MSI DOUBLE
CHECK - DISABLE
UPC/EAN DOUBLE
CHECK DISABLE
REVERSE IMANGE
- DISABLE
SEND BAR CODE
ID – AS A PREFIX
CODABAR DOUBLE
CHECK - ENABLE
This is used for determining if need to repeat the reading and decoding
after successfully reading barcodes.
CODABAR DOUBLE
CHECK - DISABLE
SEND BAR CODE
ID - RESET
SEND BAR CODE
ID – AS A SUFFIX
to check the symbology of barcode you scan (g means Code 128; e
means EAN 13)
L
Keyboard Language
Scan the appropriate country code below to program the keyboard
for your country or language. As a general rule, the following
characters are not supported by the scanner for countries other
than the United States: @ | $ # { } [ ] = / ‘ \ < > ~
DENMARK FINLAND
FRANCE GERMANY
ITALY LATIN AMERICA
NETHERLANDS NORWAY
POLAND SPAIN
SWITZERLAND
(FRENCH)
SWEDEN UNITED KINGDOM
UNIVERSAL UNITED STATES
SWITZERLAND
(GERMAN)
CODE 11 –
ENABLE
CODE 39 –
ENABLE
FULL ASCII –
ENABLE
CODE 93
-ENABLE
CODE 128
-ENABLE
CODE 128 ISBT -
ENABLE
CODABAR –
ENABLE
Symbologies On/OFF-1
CODE 11
CODE 11 –
DISABLE
CODE 39
CODE 39 –
DISABLE
FULL ASCII –
DISABLE
CODE 93
CODE 93
-DISABLE
CODE 128
CODE 128 -
DISABLE
CODE 128 ISBT -
DISABLE
CODABAR
CODABAR -
DISABLE
I2OF5 - ENABLE I2OF5 - DISABLE
ID2OF5 - ENABLE ID2OF5 - DISABLE
MSI - ENABLE
UPC-A ENABLE UPC-A DISABLE
UPC-E ENABLE UPC-E DISABLE
EAN-13 ENABLE EAN-13 DISABLE
EAN-8 ENABLE EAN-8 DISABLE
Symbologies On/OFF-2
INTERLEA
VED 2 OF 5
INDUSTRIA
2 OF 5
MSI
UPC/EAN
MSI - DISABLE
Loading...