Renkforce DV101NL/TS01 User guide
90
(DV101NL)
USER MANUAL
When you selected the other city, the weather information will be of this selected city.
SET THE TIME ZONE AND LANGUAGE
City mode.
2
9 10
with 3 channels
Key Features:
- Weather Status for today and tomorrow for 470 cities
- Rain/Snow/Hail Probability for today
- Wind Speed and Wind Direction for today
- 3 channel outdoor 433MHz wireless Thermometer
- Indoor Thermometer
- Maximum and minimum memories of temperature readings
- Temperature trends (UP/ FLAT/ DOWN), Temperature in degree C only.
- Regional Day-time temperature and Night-time Temperature information
- 7-languages abbreviation (English/ Espanol/ Francais/ Italiano/Dutch /Swedish/ Deutsch)
- Critical Weather Alert
- 5 Selected cities Information.
- Radio-controlled Clock and Calendar (24 hours format only)
- Time-zone setting
- Powered by 2 x AA batteries for main unit, and 2 x AAA batteries for the outdoor sensor
- Dual alarm (weekday alarm/single alarm, Alarm sound for 2 minutes)
- Pre- alarm (Programmable) for outdoor sensor – Channel 1 only.
- Battery Low Indicator for Main Unit and Wireless Sensor
DAY/NIGHT
DAY/NIGHT
blinkt
WEATHER
DAY/NIGHT
WEATHER
WEATHER
Tomorrow
Today or Tomorrow (shift)
Information including Wind
Speed, Wind Direction, and the
probability of Rain/Snow/Hail,
Day & Night Temperature, Day
& Night Weather Status.
In/Outdoor Temperature
3 4
There are total 7 buttons on the Main Unit, namely:
SET
- Selected Date &Time City Week Alarm time“OFF W-ALM” Single
Alarm time
alarm“OFF S-ALM” Pre-Alarm“OFF P-ALM”
- Press and HOLD [SET] for 3 seconds to select your <1> Country, <2> Time Zone, <3>
Language, <4>Exit to city display mode
DAY/NIGHT
- Critical Whether Information Time + Date Day/Night Weather Status Change
- Read the critical weather information one by one.
▲
- increasing the value during setting
- Turn ON alarm
- Press and Hold for 3 seconds to force RC Clock receiving
- Shift Tomorrow Weather information on LCD and the “DAY”tcon fleshing.
▼
- decreasing the value during setting
- Chose one of the pre-selected cities
SIZE AA / UM3
SIZE AA / UM3
- Turn OFF alarm
- Press and Hold for 3 seconds to force to search for outdoor sensor
MEM
- display the maximum and minimum measured Temperature in record
- Press and Hold for 3 seconds to clear all the Max. and Min. record
- Edit your home town
TEST √
- Find the place for the device which has a good reception
Main Unit
- Add the city into the list of your desired cities
OR
Remove the city out of the list of desired Cities
- Edit your home town
CHANNEL
- Switch to read Outdoor Thermometer channel 1, 2, 3.
- Press and Hold key for 3 seconds to enter into“ ” display mode
MOTION SENSOR
- Move your hand before the sensor, to shift Tomorrow Weather information on LCD and the
“DAY” icon flashing.
Remote Thermometer
5 6
11 12
OUTDOOR TEMPEATURE READING
The wave display indicates the reception of the remote unit is in good order.
If no readings are received from the remote unit for more than two minutes, blanks will be
displayed until further readings are successfully searched. Checked the remote unit is sound and
secure. You can wait for a little while or Hold DOWN (▼) button for 2 seconds to enforce an
immediate search.
The kinetic wave display shows the signal receiving status of the main unit. There are three
possible forms:
Icon
Status
Searching for the signals from the remote sensor
Corresponding remote sensor signal received successfully
No signals
TEMPERATURE TREND
The trend indicator shows the trend of temperatures collected at that particular remote sight.
Three trends: rising steady and falling will be shown.
Arrow indicator
Temperature Trend Rising Steady Falling
VIEWING REMOTE (CHANNEL) TEMPERATURE
Static Display:
- Press [ CHANNEL ] button to select measurements from different remote sensors, each is
mode to a unique channel 1,2, or 3
Channel Auto-Scan Display:
- Press To enable an automatic scan of all channels, press and hold CHANNEL button, until the
icon is displayed. The measurements from each remote channel will be alternately
displayed with a 5 seconds viewing.
NOTE: the channel auto-scan feature can be active only if there are more than one remote
sensors operating and are set to different channels.
13 14
SINGLE ALARM PRE-ALARM TIME & DATE.
WEEK ALARM
DAY/NIGHT
MAXIMUM AND MINIMUM TEMPERATURES
- The maximum and minimum recorded indoor and outdoor temperatures will be automatically
stored in the memory of the main unit. To display them, press [MEM] button and the
respective indicators, [MAX] or [MIN] will be displayed.
- To clear the memory, hold [MEM] button for 3 seconds. The maximum and minimum
temperature records will be erased.
ALARM FEATURE
There are three time alarms available on the main unit:
* Weekday Alarm
The alarm sound will be activated and the icon will flash on weekdays (Mo-Fr) when it is
armed and the alarm time is reached.
* Single Alarm
The alarm sound will be activated and the icon will flash when it is armed and the alarm time
is reached. Once it finished, it will be disabled automatically
* Pre-Alarm
The pre-alarm will be activated and the icon will falsh if the temperature of channel 1 is falling
to +0 °C or below.
It is programmable 15,30,45,60 or 90 minutes earlier than the weekday alarm or single alarm
time.
HOW TO SET ALARM
- Press [SET] button to toggle between weekday, single alarm time or pre-alarm.
If the alarm is disarmed, the time will be displayed as “OFF W-ALM”
- Hold [SET] button for 3 seconds, the hour digits will blink.
- Enter the hour by using UP [▲] or DOWN [▼] button.
- Press [SET] button to confirm, the minute digits will blink.
- Enter the hour by using UP [▲] or DOWN [▼] button.
- Press [SET] button to exit and the respective alarm icons [ ] , [ ] and [ ]will be
activated.
SNOOZE FUNCTION
-When alarm is on, swing your hand on above the motion sensor, alarm will be stopped
temporarily and the alarm icon flashing. The alarm will sound again after 4 minutes.
HOW TO STOP ALARM
- When alarm is on, the respective alarm icons [ ] and [ ] will be flashing. Press UP [▲] or
DOWN [▼] button to stop the alarm immediately.
- To turn off the alarm, press UP [▲] or DOWN [▼] button to change the alarm time display as
-ALM”
“OFF W
- If no button is pressed, the alarm will be sounded for 2 minutes and then deactivated
automatically.
Insert 2 pcs AAA batteries for remote sensor, and then insert 2 pcs AA batteries for the
• Scan A: that “A” means the reception quality should be 0=bad…..9=very good
SWITCH CITY ALARM TIME TIME & DATE
• After inserting the batteries, the weather station searches for the Radio controlled Time signal
as well as the MeteoTime signal. After it has successfully received the MeteoTime signal, the
information windows the default city “ ”.
• You are able to press [ SET ] to switch from the display of the City to week alarm, single
alarm or pre-alarm or date for Frankfurt am Main.
7 8
15 16
-20 degree C to 60 degree C
AA batteries x 2 pcs.
AAA batteries x 2 pcs.
Product : DV101NL
EN 300 330-2,V1.5.1:2010
EN 301 489-1, V1.9.2:2011
EN 301 489-3, V1.4.1:2002
EN 300 200-2 V2.3.1:2010
EN 60950-1:2006+A11:2009+A1:2010+A12:2011
EN 62479:2010
The product is therefore conform with the Low Voltage Directive 2006/95/EG and R&TTE
Directive 1995/5/EC (appendix II) and carries the respective CE marking.
C (within +5ºC - +40ºC)
Maximum No. of Remote unit : 3
And Norway
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34
35 36
37
Loading...