
© 1990 - 2005 Renishaw plc. All rights reserved.
This document may not be copied or reproduced in whole or in part, or
transferred to any other media or language, by any means, without the
prior written permission of Renishaw.
The publication of material within this document does not imply
freedom from the patent rights of Renishaw plc.
Disclaimer
Considerable effort has been made to ensure that the contents of
this document are free from inaccuracies and omissions. However,
Renishaw makes no warranties with respect to the contents of this
document and specifi cally disclaims any implied warranties. Renishaw
reserves the right to make changes to this document and to the
product described herein without obligation to notify any person of
such changes.
Trademarks
RENISHAW® and the probe emblem used in the RENISHAW logo are
registered trademarks of Renishaw plc in the UK and other countries.
apply innovation is a trademark of Renishaw plc.
All other brand names and product names used in this document are
trade names, service marks, trademarks, or registered trademarks of
their respective owners.
Renishaw part no: H-1000-5012-02-A
Issued: 05 2005

2 3
TP7M stylus kit TP7M stylus kit
Position Description
1 M4 STY D8R L100 EWL 100 D4.5CE
2 M4-M3 EXT L100CE
3 M4-M3 EXT L75CE
4 M4 STY D8R L50 EWL 50 D4.5CE
5 M4-M3 EXT L50CE
6 M4 EXT L50 D7.4CE
7 M4 EXT L30 D7.4CE
8 M4 ACC CENTER 5-WAY
9 M3 HEM D30CE
10 M4-M3 EXT L9SS
11 M4-M3 EXT L9SS
12 M3 ACC CENTER 5-WAY
13 M2 ACC CENTER 5-WAY
14 M3-M2 EXT L5SS
15 M3-M2 EXT L5SS
16 M3-M2 EXT L5SS
17 M3-M2 EXT L5SS
18 M3-M2 EXT L5SS
19 M4 STYLUS TOOL
20 M4 STYLUS TOOL
21 M2-M3 STYLUS TOOL
22 M2-M3 STYLUS TOOL
23 M4-M3 EXT L20SS
24 M4 STY D1R L19.5 EWL4 D0.7SS
25 M4 STY D2R L19 EWL8 D1.4SS
26 M4 STY D2R L19 EWL8 D1.4SS
27 M4 STY D2R L19 EWL8 D1.4SS
28 M4 STY D2R L19 EWL8 D1.4SS
29 M4 STY D4R L18 EWL13 D3SS

4
TP7M stylus kit
Stylus selection
The TP7M is high accuracy probe specifi cally designed to maintain a high level of
accuracy and reliability across a wide spectrum of applications. For best performance,
the guidelines given should be followed:
Do not:
● use more than 50 mm of M3 or M2 styli, or accessories.
● use M2 styli within 30 mm of the probe mounting face or probe axis.
● use the M4 / M2 (SA5) adaptor, use the M4 / M3 and the M3 / M2 adaptors
instead.
● do not use stylus knuckle joints.
Do:
● use the longest possible M4 stylus extensions or M4 / M3 adaptor extensions to
achieve a required stylus length.
● follow the guidelines in section 5 of the TP7M user’s guide (Renishaw part
number H-1000-5010) for stylus selection
● use M3 and M4 styli wherever possible to maximise the stiffness of the stylus
confi guration, however, M2 styli can be used if necessary for workpiece access.
● tighten up styli adequately using the stylus tools provided.
● ensure stylus ball is kept clean at all times by using distilled water or a proprietary
cleaning fl uid.

Renishaw plc
New Mills, Wotton-under-Edge,
Gloucestershire, GL12 8JR
United Kingdom
T +44 (0)1453 524524
F +44 (0)1453 524901
E uk@renishaw.com
www.renishaw.com
For worldwide contact details,
please visit our main website at
www.renishaw.com/contact
*H-1000-5012-02*