Renishaw RMP40 Users manual
Quick-start guide
H-5480-8500-01-A
RMP40
© 2007 Renishaw plc. All rights reserved.
This document may not be copied or
reproduced in whole or in part, or transferred
to any other media or language, by any means,
without the prior written permission of Renishaw
plc.
The publication of material within this document
does not imply freedom from the patent rights of
Renishaw plc.
Disclaimer
Considerable effort has been made to ensure
that the contents of this document are free
from inaccuracies and omissions. However,
Renishaw makes no warranties with respect to
the contents of this document and specifically
disclaims any implied warranties. Renishaw
reserves the right to make changes to this
document and to the product described herein
without obligation to notify any person of such
changes.
Renishaw part no: H-5480-8500-01-A
Issued: 09.2007
Trademarks
RENISHAW® and the probe emblem used in the
RENISHAW logo are registered trademarks of
Renishaw plc in the UK and other countries.
apply innovation and Trigger Logic are
trademarks of Renishaw plc.
Adobe and Acrobat are either registered
trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.
All other brand names and product names
used in this document are trade names, service
marks, trademarks, or registered trademarks of
their respective owners.
CAUTION: The RMP40 has a glass
!
window, handle with care if broken to
avoid injury
Batteries
Batteries : 1/2 AA (3.6 V) Lithium Thionyl Chloride × 2
3
Ecocel: EB 1425, EB1426
Saft: LS 14250 C, LS 14250
Sonnenschein: SL-750
Xeno: XL-050F
Dubilier: SB-AA02
Maxell: ER3S
Sanyo: CR 14250 SE
Sonnenschein:
Tadiran:
TL-2150, TL-5101
Varta:
SL-350, SL-550
TL-4902 TL-5902,
CR 1/2 AA
1
1
2
Fitting the stylus
M-5000-3707
2
Installing the batteries
V Take care not to short the
battery contacts as this may
be a fire hazard. Ensure the
contact strips are located
securely.
1
3
4
2
V
3
1
Key to the symbols
LED short flash
LED long flash
Reviewing the probe settings
2
> 5 s
3
LED check
Switch on method
Radio on
(omitted if multiple probe
mode was selected)
or
Spin on
4
Reviewing the probe settings
Switch off method
Radio off or
Spin off
Mode off Mode on
or
Short time out
or
(see ‘Multiple probe mode settings’ to view all 16 choices)
Battery good
12 s
Multiple probe mode (omitted for radio-on)
Machine 1
or
Battery status
or
Medium time out
or
Machine 2 Machine 16
Battery low
Probe in standby mode
(after 5 seconds)
33 s
or
Long time out
134 s
5
Loading...