Renesas SH7600 User Manual
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas
companies.
Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry
Electronics Corporation took over all the business of both
Renesas Electronics website: http://www.renesas.com
st
, 2010
April 1
Renesas Electronics Corporation
.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different inform ation to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrig hts, or other intellectual property rights
of third parties by or arising from the use of Renesa s Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, w hether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsi bility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You sho uld not use Renesas
Electronics products or the technolog y described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporate d into any products or systems whose manufac ture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable ca re in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesa s Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronic s. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Spec ific” or for which the product is not intended where you have failed t o obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and othe r product characteristics. Renesas Elec tronics shall have no liability for malfunctions or
damages arising out of the use of Renesa s Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, se miconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measure s to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
equipment; home electronic applianc es; machine tools; personal electronic equipment; and industrial robots.
crime systems; safety equipment; and medical equipment not specifically designed for life support.
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
User’s Manual
SuperH™ Family
E10A Emulator
Additional Document for User’s Manual
SH7630 E10A HS7630KCM02HE
Renesas Microcomputer Development
Environment System
SuperH™ Family / SH7600 Series
Specific Guide for the SH7630 E10A
Emulator
Rev.1.0 2003.07
Cautions
Keep safety first in your circuit designs!
1. Renesas Technology Corporation puts the maximum effort into making semiconductor
products better and more reliable, but there is always the possibility that trouble may occur
with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of
nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the
Renesas Technology Corporation product best suited to the customer's application; they do not
convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation or a third party.
2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement
of any third-party's rights, originating in the use of any product data, diagrams, charts,
programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts,
programs and algorithms represents information on products at the time of publication of these
materials, and are subject to change by Renesas Technology Corporation without notice due to
product improvements or other reasons. It is therefore recommended that customers contact
Renesas Technology Corporation or an authorized Renesas Technology Corporation product
distributor for the latest product information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corporation assumes no responsibility for any damage, liability, or other
loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corporation by
various means, including the Renesas Technology Corporation Semiconductor home page
(http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total
system before making a final decision on th e applicability of the information and products.
Renesas Technology Corporation assumes no responsibility for any damage, liability or other
loss resulting from the information contained herein.
5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in
a device or system that is used under circumstances in which human life is potentially at stake.
Please contact Renesas Technology Corporation or an authorized Renesas Technology
Corporation product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical,
aerospace, nuclear, or undersea repeater use.
6. The prior written approval of Renesas Technology Corporation is necessary to reprint or
reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they
must be exported under a license from the Japanese government and cannot be imported into a
country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or
the country of destination is prohibited.
8. Please contact Renesas Technology Corporation for further details on these materials or the
products contained therein.
Contents
Section 1 Connecting the Emulator with the User System................................1
1.1 Components of the Emulator ............................................................................................1
1.2 Connecting the E10A Emulator with the User System.....................................................4
1.3 Installing the H-UDI Port Connector on the User System................................................5
1.4 Pin Arrangement of the H-UDI Port Connector................................................................ 5
1.5 Recommended Circuit between the H-UDI Port Connector and the MPU.......................8
1.5.1 Recommended Circuit (36-Pin Type)..................................................................8
1.5.2 Recommended Circuit (14-Pin Type)..................................................................10
Section 2 Specifications of the SH7630 E10A Emulator’s Software................13
2.1 Differences between the SH7630 and the Emulator.........................................................13
2.2 Specific Functions for the SH7630 E10A Emulator.........................................................16
2.2.1 Emulator Driver Selection ...................................................................................16
2.2.2 Break Condition Functions..................................................................................16
2.2.3 Trace Functions....................................................................................................18
2.2.4 Notes on Using the JTAG Clock (TCK) and AUD Clock (AUDCK) .................24
2.2.5 Notes on Setting the [Breakpoint] Dialog Box....................................................24
2.2.6 Notes on Setting the [Break Condition] Dialog Box and
BREAKCONDITION_SET Command...............................................................25
2.2.7 Notes on Setting the UBC_MODE Command.....................................................26
2.2.8 Performance Measurement Function...................................................................26
i
ii
Section 1 Connecting the Emulator with the User System
1.1 Components of the Emulator
The SH7630 E10A emulator supports the SH7630. Table 1.1 lists the components of the emulator.
1
Table 1.1 Components of the Emulator (HS7630KCM01H, HS7630KCM02H,
HS7630KCI01H, or HS7630KCI02H)
Classification Component
Hard-
Card emulator
ware
Appearance
PC
(PCMCIA)
Quantity Remarks
PC
Card
1 HS7630KCM01H
(PCMCIA: 14-pin type):
Depth: 85.6 mm, Width: 54.0 mm,
Height: 5.0 mm, Mass: 27.0 g
HS7630KCM02H
or
(PCMCIA: 36-pin type):
Depth: 85.6 mm, Width: 54.0 mm,
Height: 5.0 mm, Mass: 28.0 g
(PCI)
HS7630KCI01H
(PCI: 14-pin type):
Depth: 122.0 mm, Width: 96.0
mm, Mass: 80.0 g
HS7630KCI02H
(PCI: 36-pin type):
Depth: 122.0 mm, Width: 96.0
mm, Mass: 90.0 g
User system interface
cable
1 HS7630KCM01H
(PCMCIA: 14-pin type):
Length: 80 cm, Mass: 45.0 g
HS7630KCM02H
(PCMCIA: 36-pin type):
Length: 30 cm, Mass: 55.0 g
HS7630KCI01H
(PCI: 14-pin type):
Length: 150 cm, Mass: 86.0 g
HS7630KCI02H
(PCI: 36-pin type):
Length: 80 cm, Mass: 69.0 g
Ferrite core
(connected with the
user interface cable)
Software
SH7630 E10A
emulator setup
program,
SH Family E10A
Emulator User’s
Manual, and
Specific Guide to the
SH7630 E10A
Emulator
1 Countermeasure for EMI*
(only for HS7630KCM02H and
HS7630KCI02H)
1 HS7630KCM01SR,
HS0005KCM01HJ,
HS0005KCM01HE,
HS7630KCM02HJ, and
HS7630KCM02HE
(provided on a CD-R)
Note: The EMI is an abbreviation of the Electrical Magnetic Interference.
2
For EMI countermeasure, use the ferrite core by connecting the user interface cable.
When the user interface cable is connected with the emulator or user system, connect the ferrite
core in the user system as shown in figure 1.1.
Host computer (PC with PC card slot)
User system
E10A emulator
PC
PC
Card
User system connector
PC card slot
User interface cable
Figure 1.1 Connecting Ferrite Core
Ferrite core
3
1.2 Connecting the E10A Emulator with the User System
To connect the E10A emulator (hereinafter referred to as the emulator), the H-UDI port connector
must be installed on the user system to connect the user system interface cable. When designing
the user system, refer to the recommended circuit between the H-UDI port connector and the
MCU. In addition, read the E10A emulator user's manual and hardware manual for the related
device.
Table 1.2 shows the type number of the E10A emulator, the corresponding connector type, and the
use of AUD function.
Table 1.2 Type Number, AUD Function, and Connect or Type
Type Number Connector AUD Function
HS7630KCM02H, HS7630KCI02H 36-pin connector Available
HS7630KCM01H, HS7630KCI01H 14-pin connector Not available
The H-UDI port connector has the 36-pin and 14-pin types as described below. Use them
according to the purpose of the usage.
1. 36-pin type (with AUD function)
The AUD trace function is supported. A large amount of trace information can be acquired in
realtime. The E10A emulator supports the window trace function that memory access
(memory access address or memory access data) in the specified range can be acquired by
tracing.
2. 14-pin type (without AUD function)
The AUD trace function cannot be used because only the H-UDI function is supported. For
tracing, only the internal trace function is supported. Since the 14-pin type connector is
smaller than the 36-pin type (1/2.5), the area where the connector is installed o n the user
system can be reduced.
4
1.3 Installing the H-UDI Port Connector on the User System
Table 1.3 shows the recommended H-UDI port connectors for the emulator.
Table 1.3 Recommended H-UDI Port Connectors
Connector Type Number Manufacturer Specifications
36-pin connector
14-pin connector 2514-6002 Minnesota Mining &
DX10M-36S Screw type
DX10M-36SE,
DX10G1M-36SE
Hirose Electric Co., Ltd.
Lock-pin type
14-pin straight type
Manufacturing Ltd.
Note: When the 36-pin connector is used, do not connect any components under the H-UDI
connector. When the 14-pin connector is used, do not install any components within 3 mm
of the H-UDI port connector.
1.4 Pin Arrangement of the H-UDI Port Connector
Figures 1.2 and 1.3 show the pin arrangement of the 36-pin and 14-pin H-UDI port connectors,
respectively.
Note: Note that the pin number assignment of the H-UDI port connector shown below differs
from that of the connector manufacturer.
5
Pin
Signal
No.
1
AUDCK
2
GND
3
AUDATA0
4
GND
5
AUDATA1
6
GND
7
AUDATA2
8
GND
9
AUDATA3
10
GND
*2
11
/AUDSYNC
12
GND
13
NC
14
GND
15
NC
16
GND
17
TCK
18
GND
Notes:
1. Input to or output from the user system.
Input/
Output
Output
Output
Output
Output
Output
Output
Input
*1
SH7630
Pin No.
85
86
87
90
91
92
27
Note
Pin
No.
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
*2
*2
*2
*3
Signal
TMS
GND
/TRST
GND
TDI
GND
TDO
GND
/ASEBRKAK
GND
NC
GND
/RESETP
GND
GND
GND
NC
GND
Input/
Output
Input
Input
Input
Output
Output
Output
Output
2. The slash (/) means that the signal is active-low.
3. The emulator monitors the GND signal of the user system and detects
whether or not the user system is connected.
*1
SH7630
Pin No.
28
24
26
25
7
141
Note
Pulled-up
User reset
4.09
Edge of the board
(connected to the connector)
4
2
+0.2
φ
2.8
0
3
1
21.59
37.61
43.51
: Pattern inhibited area
H-UDI port connector (top view)
φ
1.27
0.7
+0.1
36
0
4.5
1.1
9.0
1.905
35
H-UDI port connector (front view)
H-UDI port connector
(Pin 1 mark)
(top view)
M2.6 x 0.45
4.8
3.9
Unit: mm
9.0
0.3
Figure 1.2 Pin Arrangement of the H-UDI Port Connector (36 Pins)
6
Loading...