To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
st
, 2010
Send any inquiries to http://www.renesas.com/inquiry
.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such informatio n is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Ren esas E lectronics data sheets or dat a books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electron ic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other appl i cations or purposes that pose a d irect threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as t he occu rrence o f failure at a certai n rate an d malfunct io ns under cert ain u se con dition s. Further,
Renesas Electronics prod ucts are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation an d also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
Quick Start
Renesas Starter Kit for SH7124
D007094_11_S01_V05
1. Installation
Do not connect the E10A module until the software support has been installed.
1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to
the CD root folder and double click on ‘setup.exe’.
2. The installer will ask you which language is to be used, please choose the appropriate one and click <OK>.
3. On the first screen of the installer proper, click <Next>.
4. The License Agreement will be shown, read and click <Yes>.
5. The next screen asks you to pick the world region – please select and click <Next>.
6. Select the RSK you wish to install and click <Next> to continue.
7. The destination folders are specified on the next screens. It is recommended to accept the default settings. Click <Next> to continue.
8. Click <Next> on all screens until the Installation process commences.
9. After the installation the machine’s site code will be shown, this is not important at this stage, click <Next> then <Finish>.
10. The Auto-update dialog box will be launched. Configure the Auto-update settings dialog to allow your installation to be checked for updates.
2. Connection
11. Connect the E10A module to the ‘E10A’ connector on the RSK using the ribbon cable.
12. Please ensure that, J11-2 & J11-3 are shorted using a jumper.
13. Plug in the LCD module to LCD connector on the RSK ensuring that the pin 1 designation corresponds to the marking on the RSK.
14. Connect the 5V power supply unit to the power jack on the RSK board and apply power. The green ‘Power’ LED located on the RSK will illuminate.
15. Connect the E10A module to a spare USB port on your PC. The green ‘ACT’ LED on the RSK will illuminate.
The ‘Found New Hardware’ Wizard will appear. Please follow the steps below to install the drivers. Note that administrator privileges are required for a
Windows™ 2000/XP machine. If offered, do not use the Windows Update option to locate the driver.
16. Verify the “Recommended” option (Renesas E-Series USB Driver) is selected and click <Next>.
17. If using Windows XP, skip to step 19; otherwise click <Next>.
18. Click <Next> to install the driver.
19. Click <Finish> to close the wizard.
Note: The Windows driver signing dialog may be displayed. Please accept the driver to continue.
3. HEW Workspace
HEW integrates various tools such as compiler, assembler, debugger and editor into a common graphical user interface. To learn more on
how to use HEW, open the HEW manual installed on your computer (Start Menu > All Programs > Renesas > High-performance Embedded
Workshop > Manual Navigator).
20. Launch HEW from the Start Menu (Start Menu > All Programs > Renesas > High-performance Embedded Workshop).
21. In the “Welcome” dialog box: Verify “Create New Workspace” is selected. Click <OK>
22. In the “New Project Workspace” dialog box: Verify the “CPU Family” is set to “SuperH RISC engine”. Select “E10A_RSKSH7124” from the left hand pane.
23. Enter a name for the workspace. The project name will be automatically completed with the Workspace name. You can change this name to ‘Tutorial’ if
required. Click <OK>.
24. On the “E10A_RSKSH7124 – Step 1” window: Select “Tutorial” and click <Next>.
25. On the “E10A_RSKSH7124 – Step 2” window: Click <Finish>.
26. On the Project Generator Information window: Click <OK>.
The project that is created has two configurations. The Release configuration compiles the project without any debugger support and can be used for the
final release code version.
27. Select the ‘Debug’ build configuration in the left hand drop down list on the tool
bar.
D007094_11_S01_V05
28. Click on the ‘Build’ icon to compile, assemble and link the project.
4. Programming and Debug
29. Select the “SessionSH7125Series_E10A_USB_SYSTEM” session in the right
hand drop down list on the tool bar.
30. Click the <Connect> button on the debug toolbar.
31. The ‘Select Emulator mode’ dialog will appear. Select the device “SH7124” and the “E10A-USB Emulator”
radio button and click <OK>.
If this isn’t the first time you have used the E10A module with this RSK, please skip to step 36.
First use of the E10A module
32. The ‘Please choose driver’ dialog will be shown. Click <OK>
33. The ‘Driver Details’ dialog will be shown, please select “Renesas E-Series USB Driver” as illustrated. The
‘Interface’ and ‘Channel’ items will be automatically populated. Click <Close>.
34. The Firmware setup dialog will be shown warning you not to disconnect the USB cable until the firmware
download is complete. Click <OK>.
35. The firmware will be downloaded to the E10A module; this will take a few moments.
Please do not disconnect the E10A from the host during download, doing so is likely to damage
the E10A module.
36. A dialog will be shown asking you to reset the user system and press <Enter>, please do so.
37. The ‘System Clock’ dialog will be shown, enter ‘10.00’ MHz and click <OK>.
38. The ‘ID code’ dialog will appear, enter “0000E10A” for the ID code and check the “New ID code” tick-box and click <OK>.
39. HEW will connect to the target and show “Connected” in the ‘Output’ view.
40. Right click on the download module listed in the left hand pane and select
‘Download’.
The code will not yet be downloaded to the microcontroller.
41. Click the ‘Reset – Go’ button.
42. The code will now be downloaded (this will take a moment or two) and will
then run. You will see the LEDs flash on the board, the rate of flashing can be adjusted using the Analog Adjust control.
43. Click the ‘Stop’ button.
The code will stop and the source code opened at the current program counter.
D007094_11_S01_V05
5. Next Step
After you have completed this quick start procedure, please review the tutorial code and sampl e code that came with the kit. You can add projects to the
current workspace by selecting (Project > I nsert Project) from the mai n menu. The tutorials will help you understand the device and development process
using Renesas Development Tools.
The Hardware manual supplied with this RSK is current at the time of publica tion. Please check for any updates to the device ma nual from the Renesas
website at:
www.renesas.com/renesas_starter_kits
6. Renesas SuperH Compiler
The version of the compiler provided with this RSK is fully fu nctional but time limited. You have 60 days to evaluate the full product b efore the compiler wi ll
limit the code linker to 256k bytes. Full licensed SH compiler versions are available from your Renesas supplier.
7. Support
Online technical support and information is available at: www.renesas.com/renesas_starter_kits
Technical Contact Details
America:
Europe: tools.support.eu@renesas.com
Japan: csc@renesas.com
Note on Autoupdate: The Autoupdater is configured to automatic ally add itself to t he Startup folder in t he Windows Start Menu an d use the registr y
defaults for access to the web. After restarting the machine the Icon will appear in the System Tray next to the clock. To change the settings or access
Autoupdate, simply right-click on the icon and use the menu that appears.
© Renesas Solutions Corporation. 2008.
© Renesas Technology Corporation. 2008.
© Renesas Technology Europe Ltd. 20 08.
techsupport.rta@renesas.com
D007094_11_S01_V05
Loading...