If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
(1/4)
Page 2
1. Outline
The R0E53035ACFJ50 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 52-pin 0.65mm pitch LQFP of
R8C/35A group.
2. Package Components (See Figure 1)
Check to see if the R0E53035ACFJ50 package has all the
following contents before using this product.
(made by Tokyo Eletech Corporation).......... 1 pc.
(made by Tokyo Eletech Corporation) ........ 1 pc.
(made by Tokyo Eletech Corporation) ...............4 pcs.
(5) R0E53035ACFJ50 User's Manual (this manual)
3. Specifications
Table 1 Specifications
PLQP0052JA-A:
Applicable package
formerly 52P6A-A
(52-pin 0.65mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53035ACFJ50 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK052SB on the user system.
(1) For debugging
Mount the NQPACK052SB on the foot pattern of the user
system and attach the YQPACK052SB on it. In addition,
connect the R0E53035ACFJ50 to the YQPACK052SB,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53035ACFJ50.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK052SB (not included) in order
on the NQPACK052SB on the user system.
Before using the R0E53035ACFJ50, be sure to read "7.
Precautions" on page 4.
R0E53035ACFJ50
YQ-GUIDE (×4)
YQPACK052SB
NQPACK052SB
Figure 1 Package components of the R0E53035ACFJ50
(1) For debugging
Flexible cable
R0E001000FLX10
(2) For on-board
evaluation
R0E53035ACFJ50
HQPACK052SB
(not included)
YQ-GUIDE (×4)
YQPACK052SB
NQPACK052SB
52-pin 0.65mm pitch
foot pattern
●: No.1 pin
Be sure to align the pins.
FLASH MCU, etc.
Figure 2 Usage of the R0E53035ACFJ50
(2/4)
Page 3
5. Connection Procedure (See Figure 3)
The procedure for connecting the R0E53035ACFJ50 is shown
below.
(1) Mount the NQPACK052SB on the user system.
(2) Attach the YQPACK052SB on the NQPACK052SB.
(3) Secure the four corners of the YQPACK052SB with the
YQ-GUIDEs.
● Do not use the screws included with the
YQPACK052SB for fixing the YQPACK052SB.
● Do NOT use the screwdriver included with the
NQPACK052SB for fixing the YQ-GUIDEs. That is
used only for the HQPACK052SB.
(4) Mount the R0E53035ACFJ50 on the YQPACK052SB.
(5) Connect the flexible cable R0E001000FLX10 of the
emulator to the R0E53035ACFJ50.
Flexible cable
R0E001000FLX10
(5)
R0E53035ACFJ50
Use a slotted screwdriver.
(4)
YQ-GUIDE (×4)
YQPACK052SB
(3)
(2)
(1)
NQPACK052SB
52-pin 0.65mm pitch
foot pattern
●: No.1 pin
Be sure to align the pins.
Figure 3 Connection procedure of the R0E53035ACFJ50
6. External Dimensions and a Sample Foot Pattern
24.00
MADE IN JAPAN Pb Free
CN1
TP1
1
100
51
50
TP2
R0E53035ACFJ50
REV.A
9.15
38.00
9.15
16.50
0.40
0.65
9.00
9.00
13.00
2.15
Figure 4 External dimensions and a sample foot pattern of the R0E53035ACFJ50
2.15
(3/4)
13.00
Unit: mm
Page 4
7. Precautions
CAUTION
Cautions to Be Taken for This Product:
z When connecting the YQPACK052SB, be sure to use the included YQ-GUIDEs.
z Do NOT use the screws included with the YQPACK052SB for connecting the YQPACK052SB.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NQPACK052SB, YQPACK052SB, HQPACK052SB, contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
z For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools