Page 1
R0E53034ECFK60
Converter Board for Connecting R8C/34E, R8C/34F, R8C/34G and R8C/34H Groups
48-pin 0.5mm pitch LQFP
User’s Manual
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and LSPACK are
trademarks of Tokyo Eletech Corporation.
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
Jun. 01, 2008
REJ10J1864-0100
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
(1/4)
Page 2
1. Outline
The R0E53034ECFK60 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 48-pin 0.5mm pitch LQFP of
R8C/34E, R8C/34F, R8C/34G and R8C/34H groups.
2. Package Components (See Figure 1)
Check to see if the R0E53034ECFK60 package has all the
following contents before using this product.
(1) R0E53034ECFK60 converter board............................ 1 pc.
(2) YQPACK048SD
(3) NQPACK048SD
(4) YQ-GUIDE
(made by Tokyo Eletech Corporation).......... 1 pc.
(made by Tokyo Eletech Corporation) ........ 1 pc.
(made by Tokyo Eletech Corporation) ...............4 pcs.
(5) R0E53034ECFK60 User's Manual (this manual)
3. Specifications
Table 1 Specifications
PLQP0048KB-A:
Applicable package
formerly 48P6Q-A
(48-pin 0.5mm pitch LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The R0E53034ECFK60 can be used for debugging and
on-board evaluation in common by mounting the
NQPACK048SD on the user system.
(1) For debugging
Mount the NQPACK048SD on the foot pattern of the user
system and attach the YQPACK048SD on it. In addition,
connect the R0E53034ECFK60 to the YQPACK048SD,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53034ECFK60.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK048SD (not included) in order
on the NQPACK048SD on the user system.
Before using the R0E53034ECFK60, be sure to read "7.
Precautions" on page 4.
R0E53034ECFK60
YQ-GUIDE (×4)
YQPACK048SD
NQPACK048SD
Figure 1 Package components of the R0E53034ECFK60
(1) For debugging
Flexible cable
R0E001000FLX10
(2) For on-board
evaluation
R0E53034ECFK60
HQPACK048SD
(not included)
YQ-GUIDE (×4)
YQPACK048SD
NQPACK048SD
48-pin 0.5mm pitch
foot pattern
●: No.1 pin
Be sure to align the pins.
FLASH MCU, etc.
Figure 2 Usage of the R0E53034ECFK60
(2/4)
Page 3
5. Connection Procedure (See Figure 3)
The procedure for connecting the R0E53034ECFK60 is shown
below.
(1) Mount the NQPACK048SD on the user system.
(2) Attach the YQPACK048SD on the NQPACK048SD.
(3) Secure the four corners of the YQPACK048SD with the
YQ-GUIDEs.
● Do not use the screws included with the
YQPACK048SD for fixing the YQPACK048SD.
● Do NOT use the screwdriver included with the
NQPACK048SD for fixing the YQ-GUIDEs. That is
used only for the HQPACK048SD.
(4) Mount the R0E53034ECFK60 on the YQPACK048SD.
(5) Connect the flexible cable R0E001000FLX10 of the
emulator to the R0E53034ECFK60.
Flexible cable
R0E001000FLX10
(5)
R0E53034ECFK60
Use a slotted screwdriver.
(4)
YQ-GUIDE (×4)
YQPACK048SD
(3)
(2)
(1)
NQPACK048SD
48-pin 0.5mm pitch
foot pattern
●: No.1 pin
Be sure to align the pins.
Figure 3 Connection procedure of the R0E53034ECFK60
6. External Dimensions and a Sample Foot Pattern
24.00
MADE IN JAPAN Pb Free
CN1
100
1
50
51
R0E53034ECFK60
TP1
TP2
REV.A
9.50
38.00
9.50
16.50
0.25
0.50
7.00
7.00
10.00
2.50
Figure 4 External dimensions and a sample foot pattern of the R0E53034ECFK60
2.50
(3/4)
10.00
Unit: mm
Page 4
7. Precautions
CAUTION
Cautions to Be Taken for This Product:
z When connecting the YQPACK048SD, be sure to use the included YQ-GUIDEs.
z Do NOT use the screws included with the YQPACK048SD for connecting the YQPACK048SD.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NQPACK048SD, YQPACK048SD, HQPACK048SD, contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
8. Correspondence of Connectors CN1
Table 2 Correspondence of the connectors
CN1 Pin No. IC1 CN1 Pin No. IC1
1 - 100 2 - 99 3 - 98 4 - 97 5 22 96 21
6 23 95 20
7 24 94 25
8 28 93 33
9 29 92 26
10 30 91 27
11 - 90 12 - 89 13 - 88 14 - 87 15 - 86 16 - 85 17 - 84 18 - 83 19 - 82 20 36 81 31
21 37 80 22 38 79 23 39 78 24 44 77 25 45 76 26 - 75 27 46 74 19
28 47 73 18
29 34 72 17
30 35 71 16
31 42 70 15
32 43 69 14
33 41 68 13
34 - 67 12
35 - 66 2
36 - 65 3
37 - 64 38 - 63 1
39 - 62 48
40 - 61 41 32 60 42 40 59 43 4 58 44 5 57 45 6 56 11
46 7 55 10
47 8 54 9
48 - 53 49 - 52 50 - 51 -
(-: No connection or signals in the emulator)
(4/4)
Loading...