R0E53032ACSJC0
Converter Board for Connecting R8C/32A Group 20-pin 0.65mm pitch LSSOP
User’s Manual
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, NSPACK, YSPACK, HSPACK and YS–GUIDE are
trademarks of Tokyo Eletech Corporation.
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
Rev.1.00
Jun. 16, 2008
REJ10J1878-0100
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
(1/4)
1. Outline
The R0E53032ACSJC0 is a converter board for connecting the
signals of the MCU unit R0E521300MCU00 for R8C/Tiny
Series to a foot pattern for 20-pin 0.65mm pitch LSSOP of
R8C/32A group.
2. Package Components (See Figure 1)
Check to see if the R0E53032ACSJC0 package has all the
following contents before using this product.
(1) R0E53032ACSJC0 converter board............................ 1 pc.
(2) YSPACK20BG
(3) NSPACK20BG
(4) YS–GUIDE
(5) R0E53032ACSJC0 User's Manual (this manual)
(made by Tokyo Eletech Corporation)............ 1 pc.
(made by Tokyo Eletech Corporation) .......... 1 pc.
(made by Tokyo Eletech Corporation) ...............2 pcs.
3. Specifications
Table 1 Specifications
PLSP0020JB-A:
Applicable package
Insertion/removal
iterations of connector
formerly 20P2F-A
(20-pin 0.65mm pitch LSSOP)
50 times
guaranteed
4. Usage (See Figure 2)
The R0E53032ACSJC0 can be used for debugging and
on-board evaluation in common by mounting the
NSPACK20BG on the user system.
(1) For debugging
Mount the NSPACK20BG on the foot pattern of the user
system and attach the YSPACK20BG on it. In addition,
connect the R0E53032ACSJC0 to the YSPACK20BG,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E53032ACSJC0.
(2) For on-board evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HSPACK20BG (not included) in order on
the NSPACK20BG on the user system.
Before using the R0E53032ACSJC0, be sure to read "7.
Precautions" on page 4.
R053032ACSJC0
YS-GUIDE (×2)
Figure 1 Package components of the R0E53032ACSJC0
Figure 2 Usage of the R0E53032ACSJC0
YSPACK20BG
NSPACK20BG
(2/4)
5. Connection Procedure (See Figure 3)
The procedure for connecting the R0E53032ACSJC0 is shown
below.
(1) Mount the NSPACK20BG on the user system.
(2) Attach the YSPACK20BG on the NSPACK20BG.
(3) Secure the two sides of the YSPACK20BG with the
YS–GUIDEs.
● Do not use the screws included with the
YSPACK20BG for fixing the YSPACK20BG.
● Do NOT use the screwdriver included with the
NSPACK20BG for fixing the YS–GUIDEs. That is
used only for the HSPACK20BG.
(4) Mount the R0E53032ACSJC0 on the YSPACK20BG.
(5) Connect the flexible cable R0E001000FLX10 of the
emulator to the R0E53032ACSJC0.
Figure 3 Connection procedure of the R0E53032ACSJC0
6. External Dimensions and a Sample Foot Pattern
MADE IN JAPAN Pb Free
CN1
4.50
Figure 4 External dimensions and a sample foot pattern of the R0E53032ACSJC0
TP1
1
100
50 51
TP2
R0E53032ACSJC0
REV.A
22.00
4.50
10.55
38.00
10.55
16.50
0.35
4.30
7.30
0.65
Unit: mm
5.85
(3/4)
7. Precautions
CAUTION
Cautions to Be Taken for This Product:
z When connecting the YSPACK20BG, be sure to use the included YS–GUIDEs.
z Do NOT use the screws included with the YSPACK20BG for connecting the YSPACK20BG.
IMPORTANT
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the NSPACK20BG, YSPACK20BG, HSPACK20BG, contact the following:
Tokyo Eletech Corporation http://www.tetc.co.jp/e_index.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
8. Correspondence of Connectors CN1
Table 2 Correspondence of the connectors
CN1 Pin No. IC1 CN1 Pin No. IC1
1 - 100 2 - 99 3 - 98 4 - 97 5 15 96 14
6 16 95 13
7 17 94 12
8 18 93 -
9 19 92 10 20 91 11 - 90 12 - 89 13 - 88 14 - 87 15 - 86 16 - 85 17 - 84 18 - 83 19 - 82 20 - 81 21 - 80 22 - 79 23 - 78 24 - 77 25 - 76 26 - 75 27 - 74 28 - 73 29 - 72 30 - 71 31 - 70 32 - 69 33 - 68 34 - 67 35 - 66 11
36 - 65 10
37 - 64 38 - 63 9
39 - 62 8
40 - 61 41 - 60 42 1 59 43 2 58 44 - 57 45 3 56 7
46 4 55 6
47 - 54 5
48 - 53 49 - 52 50 - 51 -
(-: No connection or signals in the emulator)
(4/4)
Loading...