Renesas R0E5212L4CFG00 User Manual

To our customers,

Old Company Name in Catalogs and Other Documents

On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.

Renesas Electronics website: http://www.renesas.com

April 1
Renesas Electronics Corporation

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

st

, 2010

Send any inquiries to http://www.renesas.com/inquiry

.

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is

subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights

of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of

semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control

laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics

does not warrant that such informatio n is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and

“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Ren esas E lectronics data sheets or dat a books, etc.

“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual

equipment; home electron ic appliances; machine tools; personal electronic equipment; and industrial robots.

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; safety equipment; and medical equipment not specifically designed for life support.

“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or

systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other appl i cations or purposes that pose a d irect threat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,

especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have

specific characteristics such as t he occu rrence o f failure at a certai n rate an d malfunct io ns under cert ain u se con dition s. Further,
Renesas Electronics prod ucts are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.

10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental

compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas

Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this

document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation an d also includes its majority-

owned subsidiaries.

(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

R0E5212L4CFG00

Converter Board for 32-pin 0.8mm pitch LQFP

User’s Manual

CAUTION

Renesas Tools Homepage http://www.renesas.com/tools

Rev. 1.00
Oct. 02, 2007
REJ10J1685-0100

If the requirements shown in the "CAUTION" sentences are ignored, the
equipment may cause personal injury or damage to the products.

(1/4)

1. Outline

The R0E5212L4CFG00 is a converter board for connecting the
emulation probe R0E521000EPB00 and the compact emulator
R0E521000CPE00 for R8C/Tiny Series to a foot pattern for
32-pin 0.8mm pitch LQFP (PLQP0032GB-A, formerly
32P6U-A) of R8C/2K and 2L Groups.

2. Package Components (See Figure 1)

Check to see if the R0E5212L4CFG00 package has all the
following contents before using this product.

Table 1 Package Components

Item Quantity
R0E5212L4CFG00
(Base board R0E521000CIF00 and 150mm

1 pc.

FFC cable included)
YQPACK032SA

(made by Tokyo Eletech Corporation)
NQPACK032SA
(made by Tokyo Eletech Corporation)
YQ-GUIDE
(made by Tokyo Eletech Corporation)
R0E5212L4CFG00
User's Manual (This manual)

1 pc.

1 pc.

4 pcs.

1 pc.

3. Specifications

2 Specifications

Table

Applicable package

PLQP0032GB-A

(32-pin 0.8mm pitch LQFP)

Between R0E5212L4CFG00 and

YQPACK032SA:

100 times guaranteedInsertion/removal

iterations of

connector

Between R0E521000EPB00 or

R0E521000CPE00 and

R0E5212L4CFG00:
50 times

guaranteed

4. Usage (See Figure 2)

The R0E5212L4CFG00 can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK032SA on the user system.

(1) For debugging

Mount the NQPACK032SA and YQPACK032SA on the
foot pattern of the user system in that order. And fix them
with the YQ-GUIDE’s (do not use the screws included
with the YQPACK032SA).
After connecting the R0E521000EPB00 or
R0E521000CPE00 and R0E5212L4CFG00, connect the
R0E5212L4CFG00 to the YQPACK032SA.

(2) For onboard evaluation

Mount an R8C/2K and 2L Group MCU and
HQPACK032SA (not included) in that order on the
NQPACK032SA on the user system. And fix them using a
screw included with the HQPACK032SA.

Before using the R0E5212L4CFG00, be sure to read "7.
Precautions" on page 4 and the R0E521000EPB00 or
R0E521000CPE00 User’s Manual.

R0E5212L4 CF G0 0

YQ-GUIDE (×4)YQPACK032SA NQPACK032SA

Figure 1 Package components of the R0E5212L4CFG00

(1) Debugging

R0E 521000EPB00

or

R0E 521000 CPE 00

YQ-GUIDE (x4) *

YQPACK 032 SA *

NQPACK 032S A *

: No . 1 pin

●

*: These products are included with the R0E5212L4CFG00 package.

R0E5212L4CFG00

(2) On-board evaluation

HQPACK 032 SA

(Not included)

MCU with on-chip

flash memory etc.

32-pin 0.8mm pitch

(PLQP0032GB-A) foot pattern

Figure 2 Usage of the R0E5212L4CFG00

(2/4)

5. Connection Procedure (See Figure 3)

The procedure for connecting the R0E5212L4CFG00 is shown
below.

(1) Mount the NQPACK032SA on the user system.
(2) Attach the YQPACK032SA on the NQPACK032SA.
(3) Secure the four corners of the YQPACK032SA with the

YQ-GUIDE's.

● Do not use the screws included with the

YQPACK032SA for fixing the YQPACK032SA.

● The screwdriver included with the NQPACK032SA is

used for fixing the HQPACK032SA. Do not use it for
fixing the YQ-GUIDE’s.

(4) Attach the R0E521000EPB00 or R0E521000CPE00 to the

R0E5212L4CFG00.

(5) Attach the R0E5212L4CFG00 to the YQPACK032SA.

R0E 521000 EPB 0 0

or

R0E 521000CPE 00

(4)

YQ- GUIDE (x4)

YQPACK032 SA

NQPACK0 32SA

R0E5212L4CFG00

(5)

Be sure to use a

flathead screwdriver.

(3)

(2)

(1)

32-pin 0.8mm pitch
(PLQP0032GB-A) foot pattern

Figure 3 Connection procedure of the R0E5212L4CFG00

6. External Dimensions and a Sample Foot Pattern (See Figure 4)

31.0

0.5

R0E5212L4CFG00 REV.A

MADE IN JAPAN

0.8

16.5 32.0

6.8

10.0

Figure 4 External dimensions and a sample foot pattern of the R0E5212L4CFG00

6.8

10.0

Unit: mm

(3/4)

7. Precautions

CAUTION

Cautions to Be Taken for This Product:

z Do not pull or excessively flex the cable. The cable may cause a break.
z When connecting the YQPACK032SA, be sure to use the included YQ-GUIDE's.
z Do not use the screws included with the YQPACK032SA to fix it.

IMPORTANT

Notes on This Product:

z We cannot accept any request for repair.

z For purchasing the NQPACK032SA, YQPACK032SA and HQPACK032SA, contact the following:

Tokyo Eletech Corporation http://www.tetc.co.jp/e_tet.htm
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools

8. Adding an MCU file

If you cannot select the MCU file for the R8C/2K and /2L Groups when the emulator debugger is launched, follow as below to add
the MCU file.

(1) Download the MCU file installer for the emulator to be used from the following download site.

http://tool-support.renesas.com/eng/toolnews/download/r8c2k_2l.htm

- When using with the compact emulator R0E521000CPE00
MCU file installer name: MCU_Files_install_cpe_R8C_2K-2L.exe

- When using with the emulation probe R0E521000EPB00
MCU file installer name: MCU_Files_install_epb_R8C_2K-2L.exe

(2) Start the downloaded installer to add the MCU file.

(4/4)