To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
st
, 2010
Send any inquiries to http://www.renesas.com/inquiry
.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such informatio n is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Ren esas E lectronics data sheets or dat a books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electron ic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other appl i cations or purposes that pose a d irect threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as t he occu rrence o f failure at a certai n rate an d malfunct io ns under cert ain u se con dition s. Further,
Renesas Electronics prod ucts are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation an d also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
R0E436640CFK20
Converter Board for 64-pin 0.5mm pitch LQFP
User’s Manual
* IC149-064-075-B51 is a trademark of Yamaichi Electronics Co., Ltd.
z Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
z These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
z Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
z All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
z When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
z Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
z The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
z If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
z Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
z This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be p ut to practical use by performing
integration test, evaluation, or some experiment else.
z In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
z Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
z This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
CAUTION
Renesas Tools Homepage http://www.renesas.com/tools
Keep safety first in your circuit designs!
Notes regarding these materials
Precautions to be taken when using this product
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
Rev.2.00
Feb 15, 2007
REJ10J0921-0200
(1/4)
1. Outline
The R0E436640CFK20 is a converter board for connecting the
compact emulator R0E436640CPE00 for H8/300H Tiny Series
to a foot pattern for 64-pin 0.5mm pitch LQFP
(PLQP0064KC-A) of H8/3664 Group.
2. Package Components (See Figure 1)
Table 1 Package Components
Item Quantity
(1) R0E436640CFK20
(Base board R0E436640CIF00 and 150mm
1 pc.
FFC cable included)
(2) IC149-064-075-B51
(made b y Yamaichi Electronics Co., Ltd)
Screws (M2 x 12mm)
1 pkg.
4 pcs.
Flat washers (for fixing the converter board) 4 pcs.
IC socket 1 pc.
Socket cover 1 pc.
Screws (M2 x 6mm)
4 pcs.
Flat washers (for on-board evaluation) 4 pcs.
(3) R0E436640CFK20 User's Manual
(This manual)
1 pc.
3. Specifications
Table 1 Specifications
H8/3664 Group, H8/3664N
H8/3694 Group, H8/3694N
H8/3687 Group, H8/3687N
Applicable group
H8/3672 Group, H8/36077 Group
H8/36014 Group, H8/36079 Group
H8/36064 Group, H8/36094 Group
H8/36087 Group
Applicable package
Insertion/removal
iterations of
connector
PLQP0064KB-A (previous: FP-64K)
PLQP0064KC-A (previous: FP-64E)
Between R0E436640CPE00 and
R0E436640CFK20:
50 times guaranteed
4. Usage (See Figure 2)
The R0E436640CFK20 can be used for debugging and board
mounted evaluation in common by mounting an IC socket on
the user system.
(1) For debugging
Mount the IC socket on the foot pattern of the user sy stem
in that order.
After connecting the R0E436640CPE00 and
R0E436640CIF00, connect the R0E436640CFK20 to the
IC socket. And fix them with the screws (M2 x 12mm)
included with the R0E436640CFK20.
(2) For onboard evaluation
Mount an H8/300H Tiny Series MCU in that order on the
IC socket on the user system. And fix them with the
screws (M2 x 6mm) included with the R0E436640CFK20.
Before using the R0E436640CFK20, be sure to read "7.
Precautions" on page 4 and the R0E436640CPE00 User’s
Manual.
R0E436640CFK20
IC socket
Socket cover
Screws (M2×12m m)
Flat washers
(For fixing converter board)
Screws (M2×6mm)
Flat washers
(For on-board evaluation)
Figure 1 Package components of the R0E436640CFK20
(1) Debugging
R0E436640CIF00
R0E436640CPE00
Flat washers*
Flat washers *
IC socket *
: No.1 pin
●
*：These products are included with the R0E436640CFK20 pakcage.
Screws (M2×12mm) *
R0E436640CFK20
●
●
●
(2) On-board evaluation
Screws (M2×6 mm) *
Socket cover *
MCU with on-chip
flash memory etc.
●
64-pin 0.5mm pitch foot pattern
(PLQP0064KB-A, PLQP0064KC-A)
Figure 2 Usage of the R0E436640CFK20
(2/4)
5. Connection Procedure (See Figure 3)
The procedure for connecting the R0E436640CFK20 is shown
below.
(1) Mount the IC socket on the user system.
(2) Connect the R0E436640CPE00 and R0E436640CIF00.
(3) Connect the R0E436640CFK20 and IC socket.
Fasten the IC socket to the socket cover with the four
screws (M2 x 12 mm) provided. Each screw should be
tightened a little at a time, alternating between screws on
opposing corners. Take special care, such as manually
securing the IC socket soldered area, to prevent the
soldered IC socket from being damaged by overtightening
the screws or twisting the components.
● When connecting the IC socket and socket cover, use
a Phillips-type screwdriver whose head matches the
screw head.
● If the applied torque cannot be accurately measured,
stop tightening when the force required to turn the
screw becomes significantly greater than that needed
when first tightening (The tightening torque must be
0.13 N•m or less). If a screw is tightened too much,
the screw head may break or an IC socket contact
error may be caused by a crack in the IC socket
solder.
● If the emulator does not operate correctly, cracks
might have occurred in the solder. Check conduction
with a tester and re-solder the IC socket if necessary.
R0E436640CIF00
(2)
R0E436640CPE00
Flat washers *
IC socket *
Screws (M2×12mm) *
R0E436640CFK20
(4)
(3)
(1)
64-pin 0.5mm pitch foot pattern
(PLQP0064KB-A, PLQP0064KC -A)
Figure 3 Connection procedure of the R0E436640CFK20
6. External Dimensions and a Recommended Foot Pattern (See Figure 4)
Note that the dimensions of the recommended foot pattern in Figure 4 are somewhat different from those of the actual foot pattern.
47.0
0.30±0.05
14.0(mn13.50)
R0E436640CFK20 R EV .A
MADE IN JAPAN
14.0 44.0
10.0(max10.10)
14.0(mn13.50)
Figure 4 External dimensions and a recommended foot pattern of the R0E436640CFK20
0.50±0.05
10.0(max10.10)
Unit: mm
(3/4)
7. Precautions
Cautions to Be Taken for This Product:
z Do not connect anything to the NC pins.
z Do not pull or excessively flex the cable. The cable may cause a break.
z When connecting the emulator and IC socket, be sure to use the included screws (M2 x 12mm).
z When connecting the IC socket and socket cover, be sure to use the included screws (M2 x 6mm).
z When connecting the IC socket and socket cover, use a Phillips-type screwdriver whose head matches the screw
head.
z If the applied torque cannot be accurately measured, stop tightening when the force required to turn the screw
becomes significantly greater than that needed when first tightening (The tightening torque must be 0.29 N•m or
less). If a screw is tightened too much, the screw head may break or an IC socket contact error may be caused by a
crack in the IC socket solder.
z If the emulator does not operate correctly, cracks might have occurred in the solder. Check conduction with a tester
and re-solder the IC socket if necessary.
z Fasten the IC socket to the socket cover with the four screws (M2 x 6 mm, with flat washers) provided. Each screw
should be tightened a little at a time, alternating between screws on opposing corners. Take special care, such as
manually securing the IC socket soldered area, to prevent the soldered IC socket from being damaged by
overtightening the screws or twisting the components.
z After checking the location of pin 1 on the IC socket, apply epoxy resin adhesive to the bottom of the IC socket, and
fasten it to the user system before soldering.
z Be sure to completely solder the leads so that the solder slops gently over the leads and forms solder fillets. (Use
slightly more solder than the MCU.)
IMPORTANT
CAUTION
Notes on This Product:
z We cannot accept any request for repair.
z For purchasing the IC149-064-075-B51, contact the following:
Yamaichi Electronics Co., Ltd. http://www.yamaichi.com/
z For inquiries about the product or the contents of this manual, contact your local distributor.
Renesas Tools Homepage http://www.renesas.com/tools
(4/4)
Loading...