Renesas R0E0100TNPFJ00 User Manual

R0E0100TNPFJ00

Converter Board for Connecting R0E001000FLX10 to 100-pin 0.65mm pitch QFP

User’s Manual

* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET, CSPLUG/W and LSPACK are

trademarks of Tokyo Eletech Corporation.

CAUTION

Renesas Tools Homepage http://www.renesas.com/tools

Rev.1.00
Feb. 16, 2008
REJ10J1735-0100

If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.

(1/4)

1. Outline

The R0E0100TNPFJ00 is a converter board for connecting the
flexible cable R0E001000FLX10 to a foot pattern for 100-pin

0.65mm pitch QFP.

2. Package Components (See Figure 1)

Check to see if the R0E0100TNPFJ00 package has all the
following contents before using this product.

(1) R0E0100TNPFJ00 converter board ............................ 1 pc.

(2) YQPACK100RB
(3) NQPACK100RB
(4) YQ-GUIDE

(made by Tokyo Eletech Corporation)................ 1 pc.

(made by Tokyo Eletech Corporation) .............. 1 pc.

(made by Tokyo Eletech Corporation) ......................4 pcs.

(5) R0E0100TNPFJ00 User's Manual (this manual)

3. Specifications

Table 1 Specifications

PRQP0100JB-A:
formerly 100P6S-A
PRQP0100JD-B:

Applicable package

formerly 100P6F-A
PLQP0100JA-A:
formerly 100P6A-A
(100-pin 0.65mm pitch QFP)

Insertion/removal

iterations of connector

50 times

guaranteed

4. Usage (See Figure 2)

The R0E0100TNPFJ00 can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK100RB on the user system.

(1) For debugging

Mount the NQPACK100RB on the foot pattern of the user
system and attach the YQPACK100RB on it. In addition,
connect the R0E0100TNPFJ00 to the YQPACK100RB,
and then connect the flexible cable R0E001000FLX10 of
the emulator to the upper connector of the
R0E0100TNPFJ00.

(2) For onboard evaluation

Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK100RB168 (not included) or the
HQPACK100RB1622 (not included) in order on the
NQPACK100RB on the user system.
Use an applicable HQPACK for your package. Check
your HQPACK type number in the user’s manual of the
emulator.

- PRQP0100JB-A (formerly 100P6S-A) package:

HQPACK100RB168

- PRQP0100JD-B (formerly 100P6F-A) package:
HQPACK100RB168

- PLQP0100JA-A (formerly 100P6A-A) package:
HQPACK100RB1622

Before using the R0E0100TNPFJ00, be sure to read "7.
Precautions" on page 4.

R0E0100TNPFJ00

YQPACK100RB

converter board

YQ-GUIDE (×4)

NQPACK100RB

Figure 1 Package components of the R0E0100TNPFJ00

(1) For debugging

Flexible cable

R0E001000FLX10

(2) For on-b o a rd

evaluation

R0E0100TNPFJ00

HQPACK100RB168

(not included)

or

YQ-GUIDE (×4)

YQPACK100RB

NQPACK100RB

100-pin 0.65mm pitch

foot pattern

●: N o .1 p in
Be sure to align the pins.

HQPACK100RB1622

(not included)

FLASH MCU, etc.

Figure 2 Usage of the R0E0100TNPFJ00

(2/4)