Renesas PG-FP5 Setup Manual

R20UT0930EJ0400

Rev.4.00

Oct 03, 2016

PG-FP5 Flash Memory Programmer

Setup Manual

Thank you for purchasing the PG-FP5 flash memory programmer.
This manual helps y ou to gr asp th e overv iew of pr eparation and star tup for using th e PG-FP 5 and su pport for the pr oduct,

so please read this manual thoroughly before using the product.

Note the following point before reading this manual.

Access one of the following websites for “Renesas Electronics website” that appears in this manual.
Except for Europe area: https://www.renesas.com/pg_fp5
For Europe area: http://www.renesas.eu/update → Section PG-FP5-EE
The above pages provide the latest versions of the following software and the user’s manual.

• Programming GUI (including USB driver)

• User’s manual

• PG-FP5 parameter file

• Firmware file

• FPGA file

Chapter 1 OVERVIEW .............................................................................................................................. 2

1.1 Checking the Package Contents ....................................................................................................... 2

1.2 User’s Manual ................................................................................................................................... 2

Chapter 2 SETUP ...................................................................................................................................... 3

2.1 Obtaining Software ............................................................................................................................ 3

2.2 Installation ......................................................................................................................................... 3

2.3 System Connection ........................................................................................................................... 3

2.4 PG-FP5 Startup ................................................................................................................................. 4

2.5 Startup of Programming GUI ............................................................................................................. 4

2.6 Check and Update of Version ........................................................................................................... 6

2.7 Completion of Setup .......................................................................................................................... 7

R20UT0930EJ0400 Rev.4.00 Page 1 of 7
Oct 03, 2016

PG-FP5 Flash Memory Programmer Setup Manual

Chapter 1 OVERVIEW

1.1 Checking the Package Contents

Check the package contents in accordance with the packing list supplied with the emulator. If there are any missing or

damaged items, contact your local distributor.

1.2 User’s Manual

The PG-FP5 package does not include the user’s manual. Download the Renesas Electronics website. This manual is

installed and registered in the Windows Start menu when the Programming GUI is installed.

Adobe Reader is required to view the PDF files. See the website of Adobe Systems Incorporated for information on

Adobe Reader.

R20UT0930EJ0400 Rev.4.00 Page 2 of 7
Oct 03, 2016

PG-FP5 Flash Memory Programmer Setup Manual

Installation Order

Item

Method

automatically added.

Decompress the downloa ded file t o any folder. A *.pr5 fi le is decompre ssed

GUI is installed.

USB cable

FP5

Chapter 2 SETUP

This chapter explains preparation and startup for using the PG-FP5. For detailed usage after startup, refer to the

PG-FP5 user’s manual.

2.1 Obtaining Software

Download the programming GUI, USB driver, and PG-FP5 parameter file (PR5 file) from the following Renesas

Electronics website.

2.2 Installation

This section explains the installation procedure for the programming GUI, USB driver and parameter file (PR5 file).

1 Programming GUI,

USB driver

2 PR5 file

Run the downloaded executable file (PG-FP5_Package_Vxxx.exe) and
perform installation, following the directions on the installer screen. After
installation, the USB driver detects the PG-FP5 by plug-and-play, and it is

into any folder, so copy it to the FP5_PRJ folder where the programming

2.3 System Connection

Connect a USB cable ( or serial cable) to the USB port (or serial p ort) on the host PC, and the other s ide of the cable to the
USB connector (or serial conn ector) on the PG-FP5. Plug in the AC adapter and th en conne ct to the PG-FP5 power supply
connector.

Host PC

Serial cable

or

AC adapter

Outlet

R20UT0930EJ0400 Rev.4.00 Page 3 of 7
Oct 03, 2016

PG-FP5 Flash Memory Programmer Setup Manual

2.4 PG-FP5 Startup

After the cables are connected, press the POWER button on the PG-FP5. When th e PG-FP5 is correctly started, the
POWER LED is turned on and “Commands >” is di splayed in the me ssage di splay. If not, t he cause may be a defect i n th e
PG-FP5, contact your local distributor.

2.5 Startup of Programming GUI

Click the Start menu, “All Programs”, point to “Renesas Electronics Utilities”, “Programming Tools”, and then select
“PG-FP5 Vx.xx” of “PG-FP5 Vx.xx” to start the Programming GUI. Perform the following steps.

(1) The following message will be displayed. Click the OK button.

(2) The following message will be displayed. Click the No button.

(3) The following dialog box will be displayed. Click the Cancel button.

R20UT0930EJ0400 Rev.4.00 Page 4 of 7
Oct 03, 2016

PG-FP5 Flash Memory Programmer Setup Manual

(4) The Setup dialog box will be displayed. Click the Cancel button.

(5) The following message will be displayed. Click the OK button.

R20UT0930EJ0400 Rev.4.00 Page 5 of 7
Oct 03, 2016

PG-FP5 Flash Memory Programmer Setup Manual

Standard mode unsecured

Firmware version

FPGA version

(6) The main window will open.

2.6 Check and Update of Version

Use of the latest versions of the P rogr ammi ng G U I, firmware and FPGA is recommended. Ver sio ns can be checked as
shown below. For how to update, refer to 3.4 Update of Programming GUI, firmware and FPGA in the PG-FP5 User’s
Manual.

Programming GUI: [Help] menu → [About]

Note

Note

Firmware: [Programmer] menu → [Reset] command
FPGA: [Programmer] menu → [Reset] command

Note Display example of [Reset] command

>ver
Firmware Version V2.07
Board H/W V1, FPGA V4
Serial No.: MC10340174

R20UT0930EJ0400 Rev.4.00 Page 6 of 7
Oct 03, 2016

PG-FP5 Flash Memory Programmer Setup Manual

or contact Renesas Electronics for inquiries (https://www.renesas.com/contact).

2.7 Completion of Setup

This completes the PG-FP5 se tup. The Progra mming GUI ca n now be used. For how to perform the setup speci fic to the
device or to perform programming with the target system connected, refer to the PG-FP5 User’s Manual and the user’s
manual for the target device.

Perform self-testing in case of trouble. If it does not solve the problem, please see the FAQ
(<https://www.renesas.com/pg_fp5> -> Design Support -> FAQ),

All trademarks and registered trademarks are the property of their respective owners.

R20UT0930EJ0400 Rev.4.00 Page 7 of 7
Oct 03, 2016

Notice

1. Descriptions of cir c uits, software and other related information in this document are pr ov ided only to illustrate the oper ation of semiconductor pr oduc ts and application examples. Y ou ar e fully responsible for
the incorporation of t hes e c ir c uits, softwar e, and information in the des ign of your equipment. Renesas E lec tronics assumes no res pons ibility for any losses incur r ed by y ou or third parties arising f r om the use
of these circuits , software, or information.

2. Renesas Electronics has us ed r eas onable c ar e in pr epar ing the information included in this doc um ent, but Renesas Electronics does not warrant that such infor m ation is error free. Renes as E lec t ronics
assumes no liability whats oev er for any damages incurred by you r es ulting from errors in or om is s ions from the information included herein.

3. Renesas Electronics does not as s ume any liability for infr ingem ent of patents, c opy r ights, or other int ellec tual property rights of third parties by or ar is ing from the use of Renesas E lec tronics products or
technical information des c ribed in this document. No lic ens e, express, implied or otherwise, is granted her eby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.

4. You should not alter, modify, copy, or otherwise misappropriate any Renes as E lec tronics product, whether in whole or in part. Renesas E lec tronics assumes no res pons ibilit y for any losses incurred by y ou or
third parties arising from such alteration, modification, c opy or otherwise misappropriation of Renesas Electronics pr oduc t.

5. Renesas Electronics pr oduc ts are classified accor ding to the following two quality gr ades : "Standard" and "High Quality". The recommended applications for each Renesas Electr onic s pr oduc t depends on
the product's quality grade, as indicated below.
"Standard": Com puters; offic e equipm ent; communications equipm ent; test and meas ur em ent equipment; audio and visual equipment; home electronic appliances ; machine tools; pers onal elec tronic
equipment; and industrial r obots etc.
"High Quality": Transportat ion equipm ent (automobiles, t r ains , ships, etc. ) ; traffic control systems; anti-disaster s y s tems; anti-cr im e s y s tems; and safet y equipm ent etc.
Renesas Electronics pr oduc t s are neither intended nor authoriz ed for use in products or s y s tems that may pos e a dir ec t threat to human life or bodily injury (artificial life support devices or s y s tems, surgical
implantations etc. ) , or may cause serious pr oper ty damages (nuclear reactor control systems, military equipm ent etc.). Y ou m us t check the quality grade of each Renesas Electronic s pr oduc t before using it
in a particular application. You may not use any Renesas Electronics product f or any applic ation for which it is not intended. Renesas Electr onic s s hall not be in any way liable for any damages or los s es
incurred by you or third par ties arising from the us e of any Renesas Electronic s pr oduc t for which the product is not intended by Renesas E lec tronics.

6. You should use the Renesas Elect r onic s pr oduc ts described in this docum ent within the range specif ied by Renes as E lec tronics, especially with respect to t he m ax im um r ating, operating supply volt age
range, movement power v oltage range, heat radiation char ac teristics, ins tallation and other product c har ac teristics. Renes as E lec tronics shall have no liability f or m alfunctions or damages aris ing out of the
use of Renesas Electronic s products beyond such specified ranges.

7. Although Renesas Electronic s endeav or s to improve the quality and r eliability of its products, semiconduct or pr oduc ts have specific char ac teristics such as the occurrence of f ailur e at a certain rate and
malfunctions under cer tain use conditions. Fur ther, Renesas Elect r onic s pr oduc ts are not subject to radiation resistanc e des ign. Please be sure to implement s afety measures t o guar d them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Elec tronics product, s uc h as s afety design for hardware and s oftware including but not lim ited to
redundancy, fire control and malfunction prevention, appropriate tr eatment for aging degradat ion or any other appropriate measures . Because the evaluation of microcomputer software alone is very dif ficult,
please evaluate the safet y of the final products or s y s tems manufactur ed by y ou.

8. Please contact a Renesas E lec tronics sales off ic e for details as to envir onm ental matters suc h as the environmental compat ibility of each Renesas Elect r onic s pr oduc t. Please use Renesas Elec tronics
products in compliance wit h all applic able laws and r egulations that regulate t he inc lus ion or us e of controlled substanc es , including without limitation, the EU RoHS Direct iv e. Renesas Electronics as s um es
no liability for damages or los s es oc c ur r ing as a r es ult of your noncompliance with applic able laws and r egulations.

9. Renesas Electronics pr oduc ts and technology may not be us ed for or incorporated int o any pr oduc ts or systems whos e m anufacture, use, or s ale is pr ohibited under any applicable domestic or foreign laws or
regulations. You should not us e Renes as E lec tronics products or technology described in this doc um ent for any purpose relat ing to military applications or us e by the military, including but not limited to the
development of weapons of m as s des t ruction. When exporting the Renesas Electr onic s pr oduc ts or technology descr ibed in this document, you s hould c om ply with the applicable export cont r ol laws and
regulations and follow the proc edur es r equir ed by s uc h laws and r egulations.

10. It is the responsibility of the buyer or dis tributor of Renesas E lec tronics products, who dis tributes, disposes of, or otherwise places the product with a thir d par ty, to notif y s uc h third party in advance of the
contents and conditions s et forth in this doc um ent, Renesas Electr onic s as s um es no r es pons ibility for any losses inc ur r ed by y ou or third parties as a result of unauthorized use of Renes as E lec tronics
products.

11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior writ ten consent of Renesas Elec tronics.

12. Please contact a Renesas Electronics sales office if you have any ques tions regarding the information contained in this document or Renesas Electronic s pr oduc ts, or if you have any other inquiries.

(Note 1) " Renes as E lec tronics" as used in t his doc um ent means Renesas Electr onic s Cor por ation and also includes its majority-owned subsidiaries.
(Note 2) " Renes as E lec tronics product(s ) " means any product developed or m anufactured by or for Renes as E lec tronics.

http://www.renesas.com

Refer to "http://www.renesas.com/" for the latest and detailed information.

Renesas Electronics America Inc.

2801 Scott Boulevard Santa Clara, CA 95050-2549, U.S.A.
Tel: [phone], Fax: [phone]

Renesas Electronics Canada Limited

9251 Yonge Street, Suite 8309 Richmond Hill, Ontario Canada L4C 9T3
Tel: [phone]

Renesas Electronics Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: [phone], Fax: [phone]

Renesas Electronics Europe GmbH

Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: [phone], Fax: [phone]

Renesas Electronics (China) Co., Ltd.

Room 1709, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100191, P.R.China
Tel: [phone], Fax: [phone]

Renesas Electronics (Shanghai) Co., Ltd.

Unit 301, Tower A, Central Towers, 555 Langao Road, Putuo District, Shanghai, P. R. China 200333
Tel: [phone], Fax: [phone]

Renesas El ectronics Hong Kong Limited

Unit 1601-1611, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: [phone], Fax: [phone]

Renesas Electronics Taiwan Co., Ltd.

13F, No. 363, Fu Shing North Road, Taipei 10543, Taiwan
Tel: [phone], Fax: [phone]

Renesas Electronics Singapore Pte. Ltd.

80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre, Singapore 339949
Tel: [phone], Fax: [phone]

Renesas Electronics Malaysia Sdn.Bhd.

Unit 1207, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: [phone], Fax: [phone]

Renesas Electronics India Pvt. Ltd.

No.777C, 100 Feet Road, HALII Stage, Indiranagar, Bangalore, India
Tel: [phone], Fax: [phone]

Renesas Electronics Korea Co., Ltd.

12F., 234 Teheran-ro, Gangnam-Gu, Seoul, 135-080, Korea
Tel: [phone], Fax: [phone]

SALES OFFI C ES

© 2016 Renesas Electronics Corporation. All rights reserved.

Colophon 5.0