Remington WDF-4820 User Manual

smooth

silky

WDF-4820

Become a Fan:

Remington Hair Care & Grooming

Use and Care Guide

Register Your New Product Today!

By registering your new Remington® product you will receive these important benefits:

Proof of ownership • Product protection • Product registration • Special offers

Register online at: www.RemingtonProducts.com

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.

READ ALL

INSTRUCTIONS

BEFORE USING.

DANGER

To reduce the risk of electric shock:

● Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.

● Except when charging, always
unplug this appliance from the
electrical outlet immediately after
using.

● Unplug this appliance before
cleaning it.

● Do not use an extension cord
or a voltage converter with this
appliance.

● Do not use while bathing or in the
shower if it is plugged in.

WARNING

To reduce the risk of burns, fire,
electric shock or injury to persons:

● This appliance is for household
use only.

● Close supervision is necessary
when this appliance is used by, on,
or near children or persons with
certain disabilities.

● Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by manufacturer.

● Keep the cord away from heated
surfaces.

● Never operate this appliance if
it has a damaged cord or plug, if
it is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.

● Do not use outdoors or operate
where aerosol (spray) products are
being used or where oxygen
is being administered.

● Plug charger directly into receptacle
– do not use an extension cord.

● Unplug charger before plugging or
unplugging appliance.

● Do not store it in temperatures
exceeding 140°F (60°C).

● Do not plug or unplug this
appliance when your hands are
wet.

● Do not wrap the cord around the
appliance.

● Always attach the plug to the
appliance, then to the outlet. To
disconnect, turn all controls to
OFF, then remove plug from outlet.
Detach removable power cords
from appliances for storage.

● Never drop or insert any object
into any of the appliance’s openings.

● The power unit is intended to be
correctly oriented in a vertical or
floor mount position.

● Do not use this appliance with
a damaged or broken heads or
cutters, as injury may occur.

The shaver is a wet shaver which
may be used in a bath or shower.

SAvE ThESE INSTRUCTIONS

Thank you for choosing REMINGTON®. Our products are designed to meet the
highest standard of quality, functionality and design. The model you have chosen
can be used in or out of the shower and is designed to provide a gentle, close
shave. Please read the instructions for use carefully and keep in a safe place for
future reference.

CAUTION

Use this appliance only for its intended use as described in this manual.
Do not use this product if it is not working correctly, if it has been dropped or
damaged, or submerged in water.

Product Features

DESCRIPTION

(A) Shaving head
(B) Head release button
(C) Flexible outer foils
(D) Massaging strip
(E) Flexible trimmer with comfort tips
(F) On/Off switch
(G) Charge stand
(H) Charging indicator light
(I) Bikini trimmer headguard
(J) Cleaning brush

(J)

(I)

(C)

(D)

GETTING READY

Please be patient when first using
your shaver, as with any new product,
it may take a little while to familiarize
yourself with the device. If you take
the time to acquaint yourself with
your shaver, we are confident you will

(A)

(B)

(E)

(F)

(G)

(H)

receive years of enjoyable use and
complete satisfaction.

INSTRUCTIONS FOR CHARGING

Always ensure that your hands, trim­mer and charge stand are dry before
charging.
Before using your REMINGTON®
shaver for the first time, charge
for 24 hours. For subsequent uses,
charge four hours before use. The
charging indicator light on your
charge stand will light up to indicate
that your shaver is charging. One full
charge allows 30 mins. of cordless
usage time.

Use product until the battery is low.
This is indicated by the shaver run­ning distinctly slower.
Your shaver cannot be overcharged,
however, if the product is not going to
be used for an extended time period
(2-3 months), unplug it from the
outlet and store. Fully recharge your
shaver when you would like to use
it again.

To preserve the life of your batteries,
let them run out every six months
then recharge for 20 hours.

CHARGING CAUTIONS

● Do not attach the power adaptor to
the outlet with wet hands.

● Always charge the shaver in a cool,
dry place.

● Do not charge the shaver in close
proximity to water.

● The shaver can be attached
to an electrical outlet voltage
of 120V only.

How To Use

Your shaver is suitable for legs, under­arms and the bikini area. It can be
used dry or in the shower.

FOR EVERYDAY SHAVING

1. Remove protective cap.

2. Turn the shaver on.

3. Hold the shaver at a right angle to
your skin and move the shaver against
the direction of the hair growth.

4. After shaving, turn shaver off.

NOTE: Before dry shaving, make sure
that the area is clean, dry and free
from creams or oil.

If you have not shaved for a while,
use the flexible trimmer before shav­ing. This will help you achieve a more
effective shaving result.

1. Turn shaver on.

2. Hold the shaver with the trimmer
facing your leg and slightly tilted
towards you (approximately at a 45º
angle).

3. Move the trimmer slowly against the
direction of the hair growth.

4. After shaving, turn off shaver.

TRIMMING AND SHAPING

1. Attach the bikini trimmer headguard.

2. Turn the shaver on.

3. Hold the shaver at a right angle
to your skin and press down gently.

4. Edge and shape the area as desired.

5. After shaving, turn off shaver.

FOR BEST SHAVING PERFORMANCE

We recommend that you use your new
shaver daily for two or three weeks to
allow time to find the optimum shaving
methods for your particular type of hair
growth patterns.

CAUTION

If your skin is easily irritated by shav­ing, or you suffer from skin allergies,
you should test a section of your arm
or leg before using the shaver.

NOTE:

● The shaver IS suitable for use in the

bath or shower.

● Do not rinse with water hotter than
160ºF.

● Do not completely submerge the
shaver in water.

Cleaning & Maintenance

CARE FOR YOUR SHAVER

To ensure long lasting performance of
your shaver, clean the head assembly
regularly. The easiest and the most
hygienic way to clean the shaver is by
rinsing the shaving head after use with
warm water. Always keep the protec­tive headguard on the shaving head
when the shaver is not in use.

AFTER EACH USE

1. Ensure the shaver is turned off.

2. Press the release buttons to open
the shaver head.

3. Blow on the foils to remove any
loose debris.

4. Brush or rinse the accumulated
hair from the main body of the shav­er, shaving head and cutter assembly.

5. Leave the head assembly open to
let the shaver dry completely.

6. Return the shaving head to its
original position and snap in place.

NOTE:

● Ensure that the shaver is turned off
when cleaning.

● Do not clean the shaving foils with
the brush.

● At regular intervals, put a drop of
sewing machine oil onto the foils
and cutters head.

REPLACING THE FOILS & CUTTERS

Signs that your foils and cutters need

replacing:

● Irritation: As foils get worn, you may
experience skin irritation.

● Pulling: As the cutters wear, your
shave may not feel as close and
you may feel your cutter pulling on
your hair.

● Wear: You may notice that the
cutters have worn through the foils.

To ensure the continued highest quality
performance from your shaver, we
recommend that foils and cutters are
replaced every 6 months.

NOTE: The replacement part for your

shaver model is SPW-480.

To order shaver accessories, contact us
at 800-392-6544 or visit us at
www.RemingtonProducts.com

TO REPLACE THE FOIL

1. Ensure the shaver is switched off.

2. Gently push the small plastic tabs
at either end of the foil carrier. The
foil carrier should then easily detach
from the shaving head.

3. To reassemble, snap the new foil
carrier into position.

4. Attach the shaving head.

CAUTION

● Only hold the plastic to prevent
damage to the foil.

● Do not press on the foil when
replacing.

TO REPLACE THE CUTTERS

1. Ensure the shaver is switched

off and open the shaving head.
(as above)

2. To remove cutter, grasp cutter

between thumb and forefinger and
pull upward.

3. To reassemble cutter, place cutter

onto oscillator tip. Gently push down
clicking into position.

Visit www.RemingtonProducts.com

for FAQ, tips & more

tabs

new foil

Battery Removal

When your rechargeable shaver
reaches the end of its useful life,
the batteries must be removed from
the shaver and recycled or disposed
of properly in accordance with your

state and local requirements.

How to Remove the Batteries
from the WDF-4820

(See diagrams to right)

1. Remove screw from bottom of shaver.

2. Separate top and bottom housings.

3. Unscrew and remove inner frame.

4. Open the inner housing and remove
the batteries.

5. Insulate battery ends by (1) placing
each battery individually into separate
plastic bags or (2) covering the
terminals of each battery completely
with plastic or non-conductive
electrical tape.

screw

screws

Warranty

Limited Two-Year Warranty

Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workman­ship for a two-year period from the
original date of consumer purchase.
This warranty does not include
damage to the product resulting
from accident or misuse.
If the product should become defec­tive within the warranty period, we
will replace it free of charge. Return
your product and sales receipt with
your name, address and day time
phone number to: Remington Returns

Center, 507 Stokely Dr., P.O. Box 1,

Deforest, WI 53532. For more infor-

mation call 800-736-4648 in the US

or 800-268-0425 in Canada.

Warranty excludes:

● Foils and cutters

KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.

This warranty does not cover
products damaged by the following:

● Accident, misuse, abuse or
alteration of the product

● Servicing by unauthorized persons

● Use with unauthorized accessories

● Connecting it to incorrect current

and voltage

● Wrapping cord around appliance

causing premature wear &

breakage

● Any other conditions beyond our
control

SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF
THIS PRODUCT. ALL IMPLIED
WARRANTIES, INCLUDING
BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND
MERCHANTABILITY, ARE LIMITED
IN DURATION TO TWO YEARS FROM
DATE OF ORIGINAL PURCHASE.

Performance Guarantee

This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state

or province to province. Some states

do not allow the exclusion or limita­tion of incidental, special or conse­quential damages.

Performance Guarantee

Spectrum Brands, Inc.
Money-back Offer

If within 30 days after you have
purchased your Remington
product, you are not satisfied and
would like a refund, return it with
the sales slip indicating purchase
price and date of purchase to the
retailer from whom it was purchased.

Spectrum Brands, Inc. will reimburse

all retailers who accept the product
within 30 days from the date of pur­chase. If you have any questions con­cerning the money-back guarantee,

please call 800-736-4648 in the US

or 800-268-0425 in Canada.

®

branded

120 VAC, 60 Hz

© 2010 ROVCAL, INC.

® REMINGTON and SMOOTH & SILKY

are Registered Trademarks of
ROVCAL, INC.

09/10 Job# 40167

Questions or comments:

Call 800-736-4648 in U.S.
or 800-268-0425 in Canada. or visit

www.RemingtonProducts.com

Dist. by: Spectrum Brands, Inc.,

Madison, WI 53711

Dist. by:

Spectrum Brands Canada, Inc.

Mississauga, ON L5L 0A1

Designed in USA T22-30584

Manufactured to Remington’s
specifications in the PRC.

Contains a

listed adaptor