Remington S5520 User Manual [en, de, fr]
sleek & smooth
6
wide
A
C
2
3
V
D
A
R
E
o
o
m
s
x
g
n
o
l
x
h
t
r
e
I
M
g
r
e
s
a
l
*vs. standard
ceramic coating
*
C
d
i
l
e
n
i
g
t
D
E
C
N
A
S1051_NStyle_23_6_08_cover.qxp 26.06.2008 14:47 Seite 2
sleek & smooth wide
K
C
B
A
F
E
D
H
L
G
J
I
2
N
0
ENGLISH
100381_REM_IFU_S5520_21L.indd GB_1
21.05.10 13:40
ENGLISH
Thank you for buying your new Remington® product. Before use, please read
these instructions carefully and keep them in a safe place for future reference.
PRODUCT FEATURES
A. Advanced Ceramic Coating for extra smooth glide and longer lasting plates
B. High heat 150 -230°C
C. Fast heat up in 15 seconds
D. Longer length 110mm plates
E. Wide plates for longer hair
F. Floating plate for superior alignment
G. On-off switch – press and hold down for 1 seconds until the display lights up /turns off.
H. Adjustable +/ - temperature buttons and digital display - LCD and bars will flash until
correct temperature is reached.
Recommended temperatures to suit hair types…
150°C - 180°C – Fine Hair
180°C - 20 0°C – Medium Hair
200°C - 230°C – Thick Hair
I. Heat boost function – Hold the ‘+’ button for 2 seconds and t he display with
automatically set to 230°C
J. Button lock function – once you have chosen your desired temperature hold the “-“
button for 2 seconds. A “padlock” symbol will appear on the display. This will prevent
accidentally changing the temperature whilst in use. To unlock hold the “-“ button
again for 2 seconds.
K. Automatic safety shut off – if no buttons have been pressed after 60 minutes the
straightener will automatically turn off
L. Hinge lock for storage: - Plates c an be shut together for easy storage
Locked - Push t he hinge lock up to the locked position
Unlocked- Pull the hinge lock down to t he unlocked position
NOTE: Do not he at the unit in the locked position
M. Heat proof pouch
N. 2.5 m Swivel cord
O. Multi -volt age: For use at home or abroad.
When used at 120V the heat up times and temperatures may vary.
120 - 240V
MULTI VOLTAGE
GBDNLFEIDKSFINPSKCZPL
GB
HUN
RUTRROGRSLAE
3 year guarantee
100381_REM_IFU_S5520_21L.indd GB_1
HR/
SRB
1
1
21.05.10 13:40
ENGLISH
100381_REM_IFU_S5520_21L.indd GB_2
21.05.10 13:40
INSTRUCTIONS FOR USE
Before use, make sure hair is clean, dry and tangle-free.
Plug in the unit, press and hold the on-off switch until the LCD lights up to switch the straightener
on.When the LCD temperature display reaches the desired temperature the styler is ready to use.
For extra protection and best results, section hair prior to straightening and spray with heat
protection spray. Always straighten the lower layers first.
Run the straightener through the entire length of the hair, without stopping.
Repeat only twice per section to prevent hair damage.
7DNHFDUHQRWWRKROG\RXUKDQGRYHUWKHWHPSHUDWXUHVHWWLQJVZLWFKHVZKLOHVW\OLQJDVWKLVFRXOGOHDGWR
DOWHULQJWKHWHPSHUDWXUHE\PLVWDNH
IMPORTANT INSTRUCTIONS
This is a high performance product, avoid frequent use to prevent damage to hair.
Due to the extreme heat capabilities of this straightener, extra care should be
taken when using.
For shorter hair, place a plastic comb between scalp and iron to avoid touching scalp.
Do not leave switched on for more than 30 minutes.
Before use, make sure hair is clean, dry and tangle-free.
While heating, during use and cooling, place on flat, smooth, heat-resistant surface.
Only hold unit at the end of the handle. Avoid touching the tips.
Do not style too close to scalp, face, ears,neck and skin.
Please note regular use of styling products may deteriorate the coating. Wipe clean regularly to
maintain performance.
Do not use an abrasive cleaning fluid to clean, as damage will occur. Use a soft damp cloth on the unit
while unplugged.
Do not scratch the surface of the plates as this will deteriorate the effectiveness of the ceramic coating.
CLEANING AND MAINTENANCE
Ensure the unit is unplugged and cool. Wipe clean any build up of styling products with a
damp cloth. Do not use an abrasive cleaning fluid to clean, as dam age will occur.
2
100381_REM_IFU_S5520_21L.indd GB_2
21.05.10 13:40
ENGLISH
100381_REM_IFU_S5520_21L.indd GB_3
21.05.10 13:40
SAFETY CAUTIONS
WARNING – FOR ADDITIONAL PROTECTION THE INSTALLATION OF A
RESIDUAL CURRENT DEVICE (RCD) WITH A RATED RESIDUAL OPERATING
CURRENT NOT EXCEEDING 30mA is ADVISABLE. ASK AN ELECTRICIAN FOR
ADVICE.
WARNING – THIS APPLIANCE MUST NOT BE TAKEN INTO A BATHROOM,
IT SHOULD NOT BE USED NEAR BATHTUBS, SHOWERS, BASINS OR OTHER
VESSELS CONTAINING WATER OR OTHER LIQUIDS.
This product is not suitable for use in bath or shower.
THE STYLER SHOULD BE UNPLUGGED FROM MAINS SUPPLY WHEN NOT IN
USE.
Do not leave the st yler unattended w hen switched on.
Allow the styler to cool down before storage.
Do not immerse in water or other liquids.
Do not place styler on soft material e.g. carpet, bedding, towels, rugs etc.
Always ensure the voltage to be used corresponds to the voltage stated on the unit.
Keep this product out of reach of children. The use of this appliance by persons wit h
reduced physical,´sensory or mental c apabilities or lack of experience and knowledge can
give cause to ha zards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
Do not use any att achments with this styler, other t han those supplied by Reming ton®.
Avoid allowing any part of the hot plates to cont act the face, neck or scalp.
Do not wr ap the cord around the unit. Check cord regul arly for any sign of damage.
This product is not intended for commercial or salon use.
Damaged cords can be dangerous. If the supply cord of this unit becomes damaged,
discontinue use immediately and return t he appliance to your ne arest authorised
Remington® service dealer for re pair or replacement in order to avoid a ha zard.
Special tools are required for any examination, adjustment or repair. Unqualified repair
work could lead to hazardous conditions for the user.
We do not accept responsibility for damage to the product, persons or other items(s),
caused by misuse, abuse or non-compliance with these instructions.
GBDNLFEIDKSFINPSKCZPL
GB
HUN
RUTRROGRSLAE
100381_REM_IFU_S5520_21L.indd GB_3
HR/
SRB
3
21.05.10 13:40
ENGLISH
100381_REM_IFU_S5520_21L.indd GB_4
21.05.10 13:40
WIRING INSTRUCTIONS UK Plugs Only
This product is fitted with a B S1363 plug fused at 5A . If the plug is unsuit able, it should be
disconnected and an a ppropriate plug fit ted as detailed below. If it is necess ary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at 5A . If in doubt consult a
qualified electrician.
The wires in the m ains lead are coloured in accordance with following code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
– The wire which is coloured BLUE must be connected to the ter minal which is marked ‘N’
or coloured BL ACK. The wire which is coloured BROWN must be connected to t he terminal
which is marked ‘L’ or coloured RED. Never connect either of the wires to the big EARTH
terminal marked ‘E’ or coloured GR EEN or GREE N AND YELLOW.
PROTECT THE ENVIRONMENT
Do not dispose the product in household waste at the end of its useful life. Disposal can take
place at t he Remington
For fur ther inform ation on recycling see www.remington-europe.com
4
100381_REM_IFU_S5520_21L.indd GB_4
®
Service Centre or appropiate collection sites.
21.05.10 13:40
Loading...