How it Works
Remington
Loading...
iCoffee EXPRESS Customer Care
User guide
16 pgs1.09 Mb0

Remington iCoffee EXPRESS Customer Care User guide

Download
Page 1
Customer Care Guide Single Serve Brewer
Taste | Innovation | Technology
EXPRESS
TM
4 to12 oz Brew Size
Page 2
Page 3
1
GARANTIES IMPORTANTES POUR LA SÉCURITÉ DU FONCTIONNEMENT ET DE L’UTILISATION
Comme avec tous les appareils électriques, lorsque vous utilisez votre brewer, les précautions de sécurité de base doivent toujours être suivies:
1. Lire et comprendre toutes les instructions avant utilisation.
2. Une surveillance attentive est nécessaire lorsqu’un appareil est utilisé par ou autour des enfants.
3. Pour protéger contre les risques d’incendie, de choc électrique et/ou de blessure, NE PAS immerger le cordon, la prise ou le brasseur unité dans l’eau ou dans tout autre liquide. Ne laissez pas de cordon pendre de la table ou du comptoir-top, ou touchez une surface chaude.
4. Pour un meilleur fonctionnement, branchez le brasseur dans sa propre prise de courant sur un circuit dédié an d’éviter les scintillements des feux, souant de fusibles ou le déclenchement du disjoncteur.
5. Toujours garder le brasseur dans sa position verticale pour éviter d’endommager votre Brewer.
6. An d’éviter les risques de blessure de extrêmement l’eau chaude, ne pas ouvrir le brasseur de mâchoire supérieure tandis que votre café est en cours de traitement.
7. Ne pas faire fonctionner un appareil avec une prise ou un cordon d’alimentation endommagé, ou si l’appareil ne fonctionne pas correctement ou est tombé ou a été endommagé de quelque manière que ce soit.
8. Ne pas trop remplir le réservoir d’eau.
9. Utiliser uniquement de l’eau dans l’appareil. Ne pas mettre d’autres liquides ou d’aliments dans le réservoir d’eau, sauf comme indiqué dans les INSTRUCTIONS DE NETTOYAGE section de ce guide.
10. Ne touchez pas les surfaces chaudes.
11. Pour éviter les risques de blessures, ne pas mettre vos doigts à l’intérieur du brasseur de mâchoire inférieure. Cette zone contient une forteaiguille pour transpercer lek-style cupet pourrait vous blesser si vous les touchez.
12. Éteignez et débranchez le brasseur avant le nettoyage ou l’entretien. Toujours laisser le brasseur de refroidir complètement avant de mettre le ou le décollage pièces ou avant de le nettoyer.
13. Ne pas utiliser les produits agressifs, laine d’acier, plaquettes ou d’autres matériaux abrasifs ou nettoyants sur le brasseur. Ces produits peuvent endommager/scratch l’appareil de surfaces.
14. Ne pas utiliser à l’extérieur.
15. Cet appareil est destiné uniquement à un usage domestique; ne pas utiliser le brasseur pour utilisation autre que son usage/objet.
Page 4
Page 5
3
Express Features
A. Water Reservior Fill Door Area B. Upper Brew Jaw C. Removable Single Serve
Cup Holder (2 Piece Unit)
D. Lower Brew Jaw area
with Needle
E. Open Lid Button (OPEN ICON) F. Water Sight Glass in oz G. Drip Tray Plate H. Drip Tray I. Add Water Light
J. Heating Light K. Brew Button L. Power Button M. Initial Priming Line
HEATING
ADD
WATER
POWER
BREW
10
1
2
6
4
8
D
B
F
E
A
G
H
A
C
L
I
J
K
6
10
8
12
M
Page 6
Page 7
NOW YOU’RE READY TO BREW YOUR FAVORITE BEVERAGE!
1. If the Brewer is not already on, press the POWER BUTTON. The POWER BUTTON and
the BREW BUTTON will illuminate.
NOTE: After 2 hours of non-use, the brewer will go into an energy saving mode. After an additional 26 hours of non-use the brewer will automatically shut o.
2. Raise the door to the WATER RESERVOIR FILL AREA and add the appropriate amount
of water (4 to 12 oz) to accommodate the size beverage you want to brew and close the WATER RESERVOIR DOOR.
CAUTION: When adding water to the ll area for brewing, never exceed the 12 oz mark on the WATER SIGHT GLASS or add more water than what you plan to use. Always ensure your mug/cup will accommodate that amount of hot liquid. The brewer is designed to pump in all water added and will dispense the same amount of hot liquid into your cup (i.e. 10 oz of water added will result in 10 oz of hot beverage in your cup).
3. Press the OPEN ICON to release the brewer’s UPPER BREW JAW, insert
your favorite K-Style Cup into the SINGE SERVE CUP HOLDER, close/lower the JAW back to its original closed position. At this point, the BREW BUTTON will be ashing.
5
2. Place a cup/mug (10 oz minimum) on the DRIP TRAY directly below the LOWER BREW JAW.
3 Press the OPEN ICON, the UPPER BREW JAW will automatically raise. At this point,
merely press it back down to its original position without adding a K-Style Cup. Once closed, the BREW BUTTON will start ashing.
4. Press the ashing BREW BUTTON. It will stop ashing and the pump will begin lling the HOT
WATER BOILER TANK.
5. Once the HOT WATER BOILER TANK is full, the RED HEATING LIGHT will illuminate and the
Boiler will begin heating the water to the ideal brewing temperature. This process will take approximately 2.5 minutes. Once the hot water has reached the perfect brewing temperature, the RED HEATING LIGHT will turn o. Now open and close the UPPER BREW JAW without adding a K-Style Cup. The BREW BUTTON will begin to ash.
6. Press the ashing BREW BUTTON, the brewer will dispense approximately 1 to 2 ounces of
hot water into your cup.
7. When the cycle is complete, merely discard the dispensed hot water.
Congratulations! You have now primed the brewer and it is ready to make your favorite
hot beverage following the steps below.
Page 8
Page 9
BREWING HOT WATER
iCoee’s Single Serve Brewer is capable of producing hot water for whatever reason you may choose (hot chocolate, soup, cooking, etc.). To brew a cup of hot water, raise the door to the WATER RESERVOIR FILL AREA and add the appropriate amount of water (4 to 12 oz) to accommodate the amount of hot water you need and close the WATER RESERVOIR DOOR.
CAUTION: When adding water to the ll area for brewing, never exceed the 12 oz FILL MARK or add more water than what you plan to use. Always ensure your mug/cup will accommodate that amount of hot liquid. The brewer is designed to pump in all water added and will dispense the same amount of hot water into your cup (i.e. 10 oz of water added will result in 10 oz of hot water in your cup).
Press the “OPEN” ICON to release the brewer’s UPPER BREW JAW then lower it back down to its original position without adding a K-Style Cup. Place the appropriate size mug/ cup on the drip tray and press the ashing BREW BUTTON. The brewer will dispense the desired amount of hot water into your cup.
BREWING ICED BEVERAGES
Craving an iced tea or iced coee? It’s no problem with iCoee’s Single Serve Brewer. Simply pick the mug/cup size (4 to 12 oz) you want to use for your iced beverage, ll it ½ to ¾ of the way full with water. Remember, you’ll want to leave room in your cup for the melting ice. Open the door to the WATER RESERVOIR FILL AREA, pour the water from your mug/cup in the WATER RESERVOIR FILL AREA and close the ll door. Put the desired amount of ice in your mug/cup and then place it on the drip tray. Choose your favorite K-Style Cup (coee, tea or other), insert the K-Style Cup into the brewer’s JAW AREA as you normally would and press the BREW BUTTON.
REMEMBER: The ice will melt as your beverage is being dispensed which will impact the amount of beverage in your cup as well as the strength of your drink. To oset the additional water from the melted ice, you may want to consider adding more/less water when you are lling the WATER RESERVOIR FILL AREA or use more/less ice. Also, never use a cup made of GLASS when brewing over ice. The glass could crack or break when the extremely hot beverage is dispensed over the ice.
7
Page 10
Page 11
9
DE-SCALING YOUR BREWER:
Over time, water mineral deposits may build up in your Brewer. Although non-toxic, these deposits can hinder the brewer’s performance. Therefore, we recommend that you de-scale the brewer every 4 to 6 months. If you live in an area with high mineral content in the water supply, you may want to complete this procedure more often. Do the following:
1. Turn the brewer on as you normally would.
2. Fill the WATER RESERVOIR FILL AREA with 4 oz of HOUSEHOLD WHITE VINEGAR and 8 oz of WATER (tap, bottled or ltered).
3. Press the “OPEN” ICON to release the brewer’s UPPER BREW JAW and then lower it back to its original position without inserting a K-style cup.
4. Place a 12 ounce or larger cup size on the DRIP TRAY and press the BREW BUTTON. The Brewer will pump the WHITE VINEGAR/WATER SOLUTION into the brew tank and will dispense out 12 oz of hot water into your cup. Merely discard the dispensed hot water.
5. Press the POWER or BREW BUTTON to turn the brewer o and allow the brewer to sit for at least 4 hours with the de-scaling solution inside, this will dissolve all the mineral content inside the brewer’s components.
6. After 4 hours, press the POWER BUTTON to turn the brewer back on.
7. Fill the WATER RESERVOIR AREA with 12 oz of fresh water.
8. Press the “OPEN” ICON to release the brewer’s UPPER BREW JAW and then lower it back to its original position without inserting a K-style cup.
9. Place a 12 ounce or larger cup size on the DRIP TRAY and press the BREW BUTTON.
10. Once the brewer has dispensed all the DESCALING SOLUTION (vinegar/water solution), discard the liquid.
11. Repeat steps 7 through 10 above to ensure all de-scaling solution has been ushed from the brewer.
CONGRATULATIONS! You have just de-scaled your brewer!
Page 12
Page 13
Please log onto iCoffee.com to register your iCoffee Brewer warranty and receive the latest news and rewards.
Limited One Year Warranty
Remington warrants that your brewer will be free of defects in materials or workmanship under normal home use for one year from the date of purchase. It is recommended that you register your purchase online at www.icoffee.com so that your information will be stored in our system . Remington will, at its option, repair or replace the Brewer without charge upon its receipt of proof of the date of purchase. If a replacement Brewer is necessary to service this warranty, the replacement Brewer may be new or reconditioned. If a replacement Brewer is sent, a new limited one year warranty will be applied to the replacement Brewer.
This warranty only applies to Brewers operated in the United States and Canada.
This warranty gives you specic legal rights, and you may also have other rights that
vary from state to state and, in the case of Canada, from province to province.
What is not covered by the Limited Warranty?
THIS WARRANTY DOES NOT COVER CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND DOES NOT COVER INCIDENTAL COSTS AND EXPENSES RESULTING FROM ANY BREACH OF THIS WARRANTY, EVEN IF FORESEEABLE. Some states or provinces do not allow the exclusion of limitations of incidental or consequential damages, so the above limitation or exclusion may not apply to you depending on the state or province of purchase.
Nor does this warranty cover damages caused by services performed by anyone other than Remington or its authorized services providers, use of parts other than genuine Remington parts, or external causes such as abuse, misuse, inappropriate power supply or acts of God.
Other Limitations
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL. IN ADDITION, REMINGTON HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES WITH RESPECT TO YOUR ICOFFEE Brewer, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Some states or provinces do not allow disclaimers of such implied warranties or limitations on how long an implied warranty lasts, so the above limitation may not apply to you depending on the state or the province of purchase.
How do I obtain warranty service?
Remington Brewers are high-quality appliances and, with proper care, are intended to provide years of satisfying performance. However, should the need arise for
warranty service, simply log on to icoffee.com and click on the warranty service link to obtain
an Authorization Return number (ATR) so that we may futher assist you or
call 1-661-257-0810 for customer service.
iCoffee.com - Remington iCoffee - 28165 Ave Crocker - Valencia, CA 91355
11
Page 14
Page 15
PRE´CAUTIONS IMPORTANTES
Instructions concernant le cordon court: un cordon d’alimentation court est fourni pour réduire les risques d’enchevêtrement ou de trébucher sur un cordon plus long.
Si une rallonge est utilisée, 1) les caractéristiques électriques de la rallonge devrait être au moins aussi grande que la puissance nominale de l’appareil ; 2) le cordon doit être
placé an qu’il ne pende pas du comptoir ou de la table où elle peut être tirée par des
enfants ou faire trébucher.
Avis: Cet appareil possède une che polarisée (une lame est plus large que l’autre). Pour réduire le risque de choc électrique, cette che s’adaptera dans une prise polari­sée que dans un sens. Si la che n’entre pas complètement dans la prise, inversez-la. Si elle ne rentre toujours pas, contactez un électricien qualié. Ne modiez pas la che
d’aucune façon.
NE PAS IMMERGER LA CAFETIÈRE ICOFFEE
DANS L’EAU OU TOUT AUTRE LIQUIDE.
CE PRODUIT EST POUR USAGE DOMESTIQUE SEULEMENT.
Mise en garde aux utilisateurs et aux PARENTS : ne sont pas les enfants de permis d’utiliser brasseur, à moins qu’il n’y a surveil­lance d’un adulte. Brasseur distribue liquide très chaud.
AVERTISSEMENT: POUR RÉDUIRE LE RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS ENLEVER LE COUVERCLE INFÉRIEUR. AUCUNE PIÈCE RÉPARABLE PAR L’UTILISATEUR N’EST À L’INTÉRIEUR. RÉPARATION DOIT ÊTRE EFFECTUÉE PAR UN TECHNICIEN AGRÉÉ UNIQUEMENT
MISE EN GARDE
RISQUE D’INCENDIE OU
CHOC ÉLECTRIQUE
NE PAS OUVRIR
!
ATTENTION, CE PRODUIT CONTIENT DES PRODUITS CHI-
MIQUES, Y COMPRIS LE PLOMB, QUI EST CONNU À L’ÉTAT
DE CALIFORNIE POUR CAUSER CANCER, MALFORMATIONS
CONGÉNITALES OU AUTRES PROBLÈMES REPRODUCTIFS.
13
CONSERVER CES INSTRUCTIONS.
Page 16
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use