REMINGTON 887 User Manual [fr]

MODEL 887™ NitroMag™
Pump Action Shotgun
Owner’s
Owner’s
Manual
Manual
Instruction Book for:
Instruction Book for:
Model 887™ NitroMag™
Model 877™ NitroMag™
Pump Action Shotgun
Pump Action Shotgun
Remington is a Trademark Registered in the United States Patent and Trademark Office By Remington Arms Company, Inc.
Printed in the U.S.A.
Part No. 302011
10/09 ORIG
IMPORTANT!
READ ALL INSTRUCTIONS AND WARNINGS IN THIS BOOK BEFORE USING THE FIREARM
Firearm Safety
Page 7 ........Important Parts of the Firearm
Page 10 ........How to Load
Page 11 ........How to Unload
Page 13 ........Lubrication and Maintenance
Page 22 ........How to Obtain Parts and Service
A Tradition of Performance and Safety.
In 1816 Eliphalet Remington was confident he could make a flintlock that was as good or better than any he could buy. His confidence was well founded. The barrel he handcraft­ed set a new standard for firearm accuracy and spawned generations of products that have made Remington® Arms America's leading gunmaker. While performance and style are certainly hallmarks of Remington firearms, one factor ultimately drives their perform­ance. Safety. Eliphalet Remington never lost sight of the fact that his rifles were poten­tially lethal and could kill someone if handled improperly. And after more than 180 years the same holds true for any firearm, including your new Remington. Eliphalet Remington's first flintlock launched a proud tradition of accuracy and responsibility.
Eliphalet Remington’s first
flintstock launched a proud
tradition of accuracy &
responsibility
Safety is Critical to Performance.
A superbly crafted gun is only as good as the hands that hold it. You can never be too careful. Shooting accidents are often caused by careless oversights such as failing to control the direction of the muzzle, failing to fully engage the safety, leaving ammunition in the chamber or using improper loads. These oversights can result in the destruc­tion of life, limb or property. There's no calling back a bullet once it's been fired, so it's critical that you know the principles of safe gun handling and storage before you ever take your new Remington firearm out of the box.
The proper use and performance of your firearm depends on correct assembly and maintenance, so it's critical that you familiarize yourself with the information in this instruction book. Even if you're a veteran shooter with a collection of Remington firearms, take the time to read this literature. Not all firearms are the same. That means the first step in safe handling is to learn the features and requirements of your new Remington.
• Let common sense rule
risk accidental discharge - such as crossing a fence, wading through a stream or climb­ing a tree - always unload your gun. Never pull or push a loaded firearm toward your­self or another person. And never carry a loaded gun in a scabbard, detached holster or gun case.
• Certain firearms
internal security devices to prevent unauthorized use. In addition, some firearms own­ers use external devices, such as cable locks and trigger blocks, for the same purpose. Even if you use such a device, you should still keep your firearm unloaded when stored or not in use. And using internal or external devices cannot substitute, however, for securing your firearms and ammunition in a separate, locked location.
• Safe storage
firearms in a secure place where unauthorized persons cannot get their hands on them without your knowledge.
• Take special care
have tragic consequences when not properly supervised. Store your firearms in a locked gun safe or some other location that physically bars a child from gaining access.
• Ammunition
firearm or ammunition in a closet, dresser drawer or under the bed. Remember, it is your responsibility to make sure that children and others unfamiliar with firearms cannot get access to your firearm and ammunition.
of firearms is just as critical as safe handling. Never store guns loaded. Be sure to keep your
should be stored and locked in a location separate from your firearm. Never leave an unsecured
when you carry a loaded gun. If you're in a situation that could
(including some Remington®rifles and shotguns) are equipped with
Firearms should be stored in a
secure place where children
cannot access them. A gun safe
is an ideal way to secure your
firearm
if there are children around. Children are fascinated by guns. It's a natural curiosity that can
3rd C O M M A N D M E N T
DON'T RELY ON YOUR GUN'S SAFETY
THE TEN COMMANDMENTS OF FIREARM SAFETY
The Ten Commandments of Firearm Safety should be etched in your memory forever. Let them govern your action wherever and whenever you’re involved with firearms. In the field. On the range. Or in your home. Please take the time to review and understand these rules.
1st C O M M A N D M E N T
ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION.
This is the most important gun safety rule.
discharge will not cause injury to yourself or others. Never allow your gun to point at any­thing you don't intend to shoot. Be especially careful when you're loading or unloading. Treat every gun as if it were loaded. And make it a habit to know where the muzzle is point­ed at all times, even when your firearm is un-loaded. No one will be injured by an acci­dental discharge if you keep your firearm pointed in a safe direction. It's as simple as that.
A safe direction is one in which an accidental
2nd C O M M A N D M E N T
Firearms should be Unloaded When Not Actually in Use.
Load your firearm only
of your sight or out of your hands. Unload it as soon as you're finished shooting - before you bring it into your car, camp or home. Remember, unloading your firearm means unloading it completely, so there is no ammunition in the chamber or in the magazine. Before handling a firearm or passing it to someone else, visually check the chamber, receiver and magazine to be certain they do not contain ammunition. Always keep the gun's action open when not in use. Never assume a gun is unloaded even if you were the last person to use it. Always check for yourself.
when you're in the field or on the target range and ready to fire. Never let a loaded gun out
Treat every gun
carefully designed to maximize performance and safety. However, because a gun's safety is a mechanical device, it could fail.
Human error
ly isn't. Or the safety may have been disengaged without your knowledge. Or you could think your gun is unloaded when there's actually a cartridge or shell in it. A mechanical safety is not a substitute for common sense. It's mere­ly a supplement to your proper handling of a firearm.
Never touch
you're loading or unloading. And don't pull the trigger when the safety is engaged or positioned between safe and fire.
Before using your gun
safety. Even when the safety is on, maintain control of your loaded firearm and control the direction of the muzzle. In other words, don't rely on your safety to justify careless handling. If your firearm's internal mechanisms are bro­ken or have been altered, your firearm may fire even when the safety is on. Remember, you and your safe gun handling practices are your gun's best safety.
as if it can fire at any time, whether or not there's pressure on the trigger. Your firearm has been
is a more likely reason for a gun safety to fail. By mistake, you may think the safety is on when it real-
the trigger on a firearm until you are ready to shoot. Keep your fingers away from the trigger when
, read this instruction book to understand the exact location and operation of your firearm's
4th C O M M A N D M E N T
B
E SURE OF YOUR TARGET AND WHATS BEYOND IT.
You can't stop a shot in mid-air, so never fire unless you know exactly where your shot is going and what it will strike. Never fire at a sound, a movement or a patch of color. A hunter in
camouflage can easily be mistaken for a target by an impulsive
shooter. Before you pull the trigger be absolutely sure of your target and
what's behind it. Make sure the shot has a backstop such as a hillside or dense
material like sand. Remember, bullets can travel great distances with tremendous veloc-
ity. Know how far your shot will go if you miss your target or the bullet ricochets.
2
3
5th C O M M A N D M E N T
Use Proper Ammunition
Every firearm is designed
nition or using improperly reloaded ammunition can cause serious personal injury or death. And it only takes one car­tridge or shotshell of the incorrect caliber or gauge, or which has been improperly reloaded, to destroy your firearm. It's your responsibility to make sure the ammunition you use exactly matches the caliber or gauge of your gun. Refer to this instruction book to find out the specific requirements of your firearm. Always read and heed the instructions on ammu­nition boxes.
Confusing shells
or cartridges closely and use only the precise caliber or gauge for your specific firearm. For example, suppose you acci­dentally loaded a 20 ga. shell into a 12 ga. shotgun. Because the 20 ga. shell is too small for the chamber, the 20 ga. shell could travel down the barrel and get lodged in the bore. If you then loaded a standard 12 ga. shell behind it and fired, the 12 ga. shot will slam into the lodged 20 ga. shell and may cause the barrel to explode right in your hand. This is commonly called a 12/20 burst, and it can kill you.
Check all ammunition
and shell is head-stamped with its caliber or gauge for easy identification. Likewise, you'll find the caliber or gauge of your new Remington firearm imprinted on the barrel.
Reloading Requires Extra Diligence.
If you're an ammunition reloader,
reloaded ammunition meet your gun's factory-tested standards. Never use ammunition, which has been reloaded by someone else!
Many shooters handload
a thorough knowledge of reloading procedures and a deep respect for the explosive potential of gunpowder.
Firearms are designed,
or reloaded ammunition that deviates, either intentionally or accidentally, from load or component recommendations can be very dangerous.
Reloaders must observe all possible safety precautions and practices related to the proper handling of explosives. Whether you're a seasoned reloader or just starting out, you should study the subject, watch reloading demonstrations and talk to experienced reloaders.
The first rule of reloading
tell you to follow certain guidelines. Namely:
1. Don't mix or substitute powders or primers.
2. Don't use unknown or substandard components.
3. Use only suitable components that have been factory-tested by reputable ammunition, powder and bullet manufacturers.
4. Always be sure to use the manufacturer's recommended recipe when reloading.
Not following these guidelines
pressure and explosions can result from an overcharge of powder or other deviations from established reloading guidelines. Be very careful. The process of reloading exposes you to environmentally hazardous material. Lead, which is known to cause cancer and birth defects, is the most common substance in bullets and shot. It is important to handle lead bullets and shot with extreme care. Work only in a well-ventilated area and always wash your hands after exposure and before eating. Never smoke while reloading.
Primers and powders
work area. Don't leave primer or powder spills anywhere on the floor or bench top. Dispose of all waste material in accor­dance with the manufacturer's recommendations.
Finally, when reloading
others, listening to the radio or watching TV while reloading. Never reload after consuming alcoholic beverages or drugs of any kind. You are working with extremely hazardous materials and you can't risk even a few seconds of distraction. Remember, if you reload, you are the ammunition manufacturer and you are responsible for the performance and safe­ty of your reloaded ammunition.
to use a certain caliber or gauge of ammunition. Using the wrong ammunition, mixing ammu-
or cartridges can cause serious personal injury or death and destroy your firearm. Examine your shells
before you load it to make sure it matches your gun's requirements. Every Remington®cartridge
you are responsible for personally assuring that the loads and components of your
as a hobby or to save money on commercial, factory-made ammunition. However, it requires
manufactured and proof-tested to standards based on factory-loaded ammunition.Handloaded
is to always follow the manufacturer's instructions for the components you're using. They'll
could result in severe injury to yourself or severe damage to your firearm. Dangerously high
are also highly toxic and flammable. So after reloading be sure to clean up all materials from your
or handloading concentrate on what you're doing at all times. Do not be distracted by talking to
6th C O M M A N D M E N T
IF YOUR GUN FAILS TO FIRE WHEN THE TRIGGER IS PULLED, HANDLE WITH CARE.
I
f for some reason
Commandment of Firearm Safety - always keep the muzzle pointed in a safe direction. Keep your face away from the breech, then put the safety on, carefully open the action, unload the firearm and dispose of the cartridge safe­ly. Remember that anytime there's a shell in the chamber, your gun is loaded and ready to use. Even if you tried to shoot and your gun didn't fire, treat your firearm as if it could still discharge.
the ammunition doesn't fire when you pull the trigger, stop and remember the 1st
7th C O M M A N D M E N T
ALWAYS WEAR EYE AND EAR PROTECTION WHEN SHOOTING.
Your sight and hearing
times. Wear protective shooting glasses to guard against falling shot, clay target chips, powder residue, ruptured cartridge cases and even twigs and branches in the field. Also be sure to wear eye protection when you're disassembling or clean­ing a gun so that tensioned parts (like springs) and cleaning solvents don't come in contact with your eyes. Continued exposure to shooting noise can permanently damage your hearing. On the range, where shooting volume is the loudest, be sure to use the maximum pro­tection of a headset. And learn to use ear protection in the field, especially in confined locations like duck blinds.
risk injury from shooting and should be protected at all
8th C O M M A N D M E N T
BE SURE THE BARREL IS CLEAR OF OBSTRUCTIONS BEFORE SHOOTING.
Before loading your gun
Check the barrel for any obstructions or debris. Even a small amount of snow, mud, excess lubricant or grease in the bore can dangerously increase pressure and cause the barrel to bulge or burst when firing. Use a clean­ing rod and patch to wipe away anti-rust compounds or any other residues or obstructions in the barrel. Never try to shoot out an obstruction by loading another shell and firing!
When firing
your firearm and be sure nothing is lodged in the barrel. Remember the 12/20 burst? That's what can happen when the barrel is obstructed. So always be sure you're using the correct ammunition in your firearm and that it's free of obstructions.
, rely on your instincts. If the noise or recoil of your firearm seems weak, stop everything, unload
, open the action and make sure there's no ammunition in the chamber or magazine.
9th C O M M A N D M E N T
DON'T ALTER OR MODIFY YOUR GUN AND HAV E I T SERVICED REGULARLY.
Your firearm has
safety and that of others around you by attempting to alter its trigger, mechanical safety or other mechanisms. So never alter or modify your firearm in any way.
barrel from the chamber end to the muzzle when possible.
Make it a practice to clean your bore every time you're going to shoot. Be sure to clean your entire gun before and after long-term storage and no less than once a year. It's also important to clean your gun whenever it's been exposed to adverse conditions such as rain, dirt, mud, snow, sleet or saltwater.
been designed to operate according to certain factory specifications. You'll jeopardize your
Like any mechanical device,
tained and periodically serviced to assure optimum safety and performance. Only a qualified service facility should service, repair or modify your Remington® firearm. Consult your instruction book for instructions on how to send your firearm to the factory or for the location of the nearest Remington repair station.
Proper cleaning and lubrication
and are necessary to assure accuracy, safety and reliability. Before cleaning, always make sure that your gun is completely unloaded. And always clean the
a firearm is subject to wear. It must be main-
are also important to firearm maintenance
4
5
For safe and dependable
Periodically inspect the internal workings of your firearm to be sure they're clean and free of rust, unwanted dirt and debris.
Use recommended lubricants
adversely affect the function and safe operation of your firearm. Remember, you are responsible for the proper care and maintenance of your firearm. Failure to properly maintain your firearm cannot only damage or ruin your firearm, it can expose you and others to unnecessary risks of personal injury or death.
Remington® has a wide range
Everything from solvents and lubricants to rods and patches. They're all available from your Remington dealer.
operation of your firearm, all parts of your gun must be properly cleaned and lubricated.
on your gun and do not over-lubricate. The use of a non-recommended lubricant could
of firearm care products and resources for best results when cleaning your gun.
Remington® Model 887NitroMag™ Pump Action Shotgun
Congratulations on your choice of a Remington®. With proper care, it should give you many years of dependable use and enjoyment. For best results, we recommend that you use Remington Ammunition - the ammunition used in factory testing your firearm against our rigorous function and performance standards.
PICTURE 1
Shotgun. The picture will aid in understanding the instructions.
This picture shows the main parts of a REMINGTON® MODEL 887™ NitroMag™ Pump Action
Stock
Receiver
Ejection Port
Barrel
Front Sight
10th C O M M A N D M E N T
LEARN THE MECHANICS AND HANDLING CHARACTERISTICS OF YOUR FIREARM.
Not all guns are alike.
them. Anyone who plans to use a firearm should first become totally familiar with the type of firearm it is and the safe handling procedures for loading, unloading, carrying, shooting and storing it.
Before you even unpack
cover to cover and familiarize yourself with the different component parts of the gun. Then read, understand and follow the Ten Commandments of Firearm Safety in this book.
WARNING! Discharging firearms in poorly ventilated areas, cleaning firearms
or handling ammunition may result in exposure to lead, a substance known to cause birth defects, reproductive harm, cancer and other serious physical injury. Have adequate ventilation at all times. Wash hands thoroughly after exposure.
SHOOT SOBER!!
There's one other rule that must be followed when handling firearms. In fact, respect for this rule is necessary in order to effectively practice the Ten Commandments of Firearm Safety. The rule is: SHOOT SOBER! Guns and alcohol or drugs make a deadly combination. Never consume anything that would mildly impair your judgment or physical coor­dination when you're using a firearm. A staggering percentage of the shooting accidents that occur every year involve alcohol or drugs. Be smart. Always shoot sober and stay alive.
WARNING! Failure to follow any of these safety rules may cause personal injury or death to the shooter or bystander
and damage to property. Do not use a firearm until you fully understand and practice the Ten Commandments of Firearm Safety. If you have any questions about the safe use of a Remington firearm, write to us at Remington Arms Company, Inc., Consumer Service, P.O. Box 700, Madison, NC 27025-0700, or call us at 1-800-243-9700.
DON'T KEEP THIS TO YOURSELF.
Now that you're a gun owner
ticipants and bystanders alike. You can do that by practicing these principles of firearm safety and passing them on to others - especially new shooters. Set an example for beginners. Be a guide to their safe entry into the exciting world of shooting sports. Invest your time and patience for the love of the sport and for its future. After all, it's your love of the sport that led you to buy a new Remington.
Firearm ownership
carries with it a personal responsibility to use your firearm in a way which will ensure your safety and the safety of others. The preservation of this right and privilege depends on the personal commitment of you and your fellow shooters to the safe and responsible use of firearms. Let the Ten Commandments of Firearm Safety outlined in the book guide you at all times. Teach and promote these rules whenever you can. Remember, firearm safety depends on you! That's the only way to really enjoy your new Remington firearm and to preserve sport shooting as we know it today.
They have different mechanical characteristics that dictate how you should carry and handle
your new Remington firearm, read this instruction book from
you have the obligation to help ensure that shooting sports are safe for everyone - par-
is a right and privilege. It's a right guaranteed in this nation's Constitution. It's a privilege, which
Safety Mechanism
Trigger
Magazine
GENERAL OPERATION
The Remington Model 887™ NitroMag™ is a pump operated shotgun, incorporating a steel barrel and receiver over molded with high strength polymer. It is capable of firing multiple shots with each cycle of the action and pull of the trigger. At the start of the fir­ing cycle after a chambered shell is dis­charged the bolt unlocks. As the fore-end or action is opened, the spent shell is pulled from the chamber and expelled out of the receiver through the ejection port. As the fore-end continues rearward the hammer is cocked and the trigger is reset. When the fore-end is in the full rear position, a shell is released from the magazine onto the carrier. As the fore-end is moved forward the carrier rises and places the new shell in front of the bolt. When the fore-end is moved fully for­ward, the new shot shell is chambered by the bolt and the bolt locks into position, completing the cycle.
SERIAL NUMBER, SHOTSHELL GAUGE AND LENGTH
The serial number is located on the bottom of the receiver. See
Carrier
Picture 2.
Muzzle
Fore-End
Magazine Cap
Specifications for the gauge and length of the shotshells intended for use in your shot­gun are located on the shooter’s left side of the barrel.
WARNING! Only use the specified gauge and length shotshell ammunition specified for your shotgun as designated on the barrel. See “To Load Your Firearm”.
IMPORTANT PARTS OF THE FIREARM
The Safety Mechanism
The safety mechanism of the Model 887™ NitroMag™ shotgun provides protection against accidental or unintentional discharge under normal usage when properly engaged and in good working order. The safety mechanism is not a substitute for following the rules of safe gun handling. The cross-bolt type safety prevents the trig­ger from being pulled when engaged in the "ON" or "SAFE" position.
To engage the safety mechanism for right­handed guns, push the "safety button" locat­ed at the rear of the trigger guard to the shooter's right until the button stops and the RED BAND MARKING CANNOT BE SEEN. See Picture 3.
Serial Number
PICTURE 2
Bottom of Receiver
6
Safety Mechanism “Safe” Position
7
PICTURE 3
Loading...
+ 8 hidden pages