REMEHA BL 150-2, BL 200-2, BL 300-2, BL 400-2, BL 500-2 Installation, User And Service Manual
Export
EN
Independent domestic hot water tanks
BL 150...500-2
Installation, User
and Service
Manual
7607674-001-04
Contents
1 Safety instructions .....................................................................................4
1.1 General safety instructions .................................4
1.2 Recommendations ................................................4
1.3 Liabilities ...............................................................5
1.3.1 Manufacturer’s liability .............................................5
1.3.2 Installer’s liability .....................................................6
1.3.3 User’s liability ..........................................................6
2 About this manual ......................................................................................7
2.1 Symbols used .......................................................7
2.1.1 Symbols used in the manual ...................................7
2.1.2 Symbols used on the equipment .............................7
2.2 Abbreviations ........................................................7
2.3 Homologations ......................................................8
2.3.1 Certifications ...........................................................8
2.3.2 Directive 97/23/EC ..................................................8
3 Technical description ................................................................................9
3.1 General description ..............................................9
3.2 Technical specifications ....................................10
3.2.1 Characteristics of the DHW calorifier ....................10
4 Installation ................................................................................................11
4.1 Regulations governing installation ...................11
4.2 Package list .........................................................11
4.2.1 Standard delivery ..................................................11
4.3 Choice of the location ........................................12
4.3.1 Type plate .............................................................12
4.3.2 Positioning of the appliance ..................................12
4.3.3 Main dimensions ...................................................12
4.4 Positioning the appliance ..................................14
4.5 Levelling ..............................................................15
4.6 Fitting the DHW sensor ......................................15
4.7 Hydraulic installation diagram ..........................15
4.7.1 Legend ..................................................................15
1
18/11/2015 - 7607674-001-04
4.7.2 Example of a wall-mounted condensing gas
boiler .....................................................................17
4.7.3 Example with a floor standing boiler .....................17
4.7.4 Safety unit .............................................................18
4.8 Hydraulic connections .......................................18
4.8.1 Hydraulic connection of the primary circuit (exchanger
circuit) ....................................................................18
4.8.2 Connecting the calorifer to the domestic water circuit
(secondary circuit) .................................................18
5 Commissioning ........................................................................................21
5.1 Protection against legionnella
(Only for the 500 L model) .................................21
5.2 Putting the appliance into operation ................21
5.3 Drinking water quality ........................................22
6 Checking and maintenance .....................................................................23
6.1 General instructions ...........................................23
6.2 Checking the safety valve or unit ......................23
6.3 Cleaning the casing material .............................23
6.4 Checking the magnesium anode .......................23
6.5 Descaling .............................................................24
6.6 Removing and remounting the inspection
hatches ................................................................24
6.6.1 Removing the inspection hatches .........................24
6.6.2 Remounting the inspection hatches ......................25
6.7 Maintenance form ...............................................26
7 Spare parts ................................................................................................27
7.1 General ................................................................27
7.2 Spare parts ..........................................................27
7.2.1 Domestic hot water tanks ......................................28
8 Warranty ....................................................................................................30
8.1 General ................................................................30
8.2 Warranty terms ...................................................30
9 Appendix - Information on the Ecodesign and Energy Labelling
Directives ..................................................................................................31
Contents
2
18/11/2015 - 7607674-001-04
3
18/11/2015 - 7607674-001-04
1 Safety instructions
1.1 General safety instructions
DANGER
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have
been given supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children shall
not play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
CAUTION
4 In order to limit the risk of being scalded, the
installation of a thermostatic mixing valve on
the domestic hot water flow piping is
compulsory.
4 The thermostatic mixing valve must be set
to maximum at 60°C.
1.2 Recommendations
CAUTION
Do not neglect to service the appliance. Service
the appliance regularly to ensure that it operates
correctly.
WARNING
Only qualified professionals are authorised to
work on the appliance and the installation.
BL 150...500-2 1. Safety instructions
18/11/2015 - 7607674-001-04
4
WARNING
Heating water and domestic water must not
come into contact with each other. Domestic
water must not circulate via the exchanger.
4 To take advantage of the guarantee, no modifications
must be made to the appliance.
4 To reduce heat losses as much as possible, insulate
the pipes.
Only remove the covers for maintenance and breakdown
repair operations and put the covers back in place after
the maintenance and breakdown repair operations.
Instructions stickers
The instructions and warnings affixed to the appliance
must never be removed or covered and must remain
legible during the entire lifespan of the appliance.
Immediately replace damaged or illegible instructions and
warning stickers.
1.3 Liabilities
1.3.1. Manufacturer’s liability
Our products are manufactured in compliance with the
requirements of the various applicable European
Directives. They are therefore delivered with [ marking
and all relevant documentation.
In the interest of customers, we are continuously
endeavouring to make improvements in product quality.
All the specifications stated in this document are therefore
subject to change without notice.
Our liability as the manufacturer may not be invoked in the
following cases:
4 Failure to abide by the instructions on using the
appliance.
4 Faulty or insufficient maintenance of the appliance.
4 Failure to abide by the instructions on installing the
appliance.
1. Safety instructions
BL 150...500-2
5
18/11/2015 - 7607674-001-04
1.3.2. Installer’s liability
The installer is responsible for the installation and
commissioning of the appliance. The installer must
respect the following instructions:
4 Read and follow the instructions given in the manuals
provided with the appliance.
4 Carry out installation in compliance with the prevailing
legislation and standards.
4 Perform the initial start up and carry out any checks
necessary.
4 Explain the installation to the user.
4 If a maintenance is necessary, warn the user of the
obligation to check the appliance and maintain it in
good working order.
4 Give all the instruction manuals to the user.
1.3.3. User’s liability
To guarantee optimum operation of the appliance, the
user must respect the following instructions:
4 Read and follow the instructions given in the manuals
provided with the appliance.
4 Call on qualified professionals to carry out installation
and initial start up.
4 Get your installer to explain your installation to you.
4 Ensure the Appliance is serviced in accordance with
the manufacturer’s instructions by a suitable qualified
person.
4 Keep the instruction manuals in good condition close
to the appliance.
BL 150...500-2 1. Safety instructions
18/11/2015 - 7607674-001-04
6
2 About this manual
2.1 Symbols used
2.1.1. Symbols used in the manual
In these instructions, various danger levels are employed to draw the
user’s attention to particular information. In so doing, we wish to
safeguard the user’s safety, highlight hazards and guarantee correct
operation of the appliance.
DANGER
Risk of a dangerous situation causing serious physical
injury.
WARNING
Risk of a dangerous situation causing slight physical
injury.
CAUTION
Risk of material damage.
Signals important information.
¼Signals a referral to other instructions or other pages in the
instructions.
2.1.2. Symbols used on the equipment
Before installing and commissioning the device, read
carefully the instruction manuals provided.
Dispose of the used products in an appropriate recovery
and recycling structure.
2.2 Abbreviations
4 DHW: Domestic hot water
2. About this manual
BL 150...500-2
7
18/11/2015 - 7607674-001-04
2.3 Homologations
2.3.1. Certifications
This product complies to the requirements to the european directives
and following standards:
4 2006/95/EC Low Voltage Directive.
Reference Standard: EN 60.335.1.
Reference Standard: EN 60.335.2.21.
4 2004/108/EC Electromagnetic Compatibility Directive.
Reference Standards: EN 50.081.1, EN 50.082.1, EN 55.014
2.3.2. Directive 97/23/EC
This product conforms to the requirements of european directive 97 /
23 / EC, article 3, paragraph 3, on pressure equipment.
BL 150...500-2 2. About this manual
18/11/2015 - 7607674-001-04
8
3 Technical description
3.1 General description
BL 150...500-2 are high performance independent domestic hot water
tanks.
DHW calorifiers BL 150...500-2 can be connected to central heating
boilers used for heating domestic hot water.
Main parts:
4 The tanks are made of high quality steel lined with food quality
standard enamel vitrified at 850°C, which protects the tank from
corrosion.
4 The heat exchanger welded into the tank is made of smooth
tubing, the external surface of which, which is in contact with
domestic water, is enamelled.
4 The appliance is insulated with polyurethane foam, which helps to
reduce heat losses to the minimum.
4 The tanks are protected against corrosion by one or more
magnesium anodes.
3. Technical description BL 150...500-2
9
18/11/2015 - 7607674-001-04
3.2 Technical specifications
3.2.1. Characteristics of the DHW calorifier
BL 150-2 BL 200-2 BL 300-2 BL 400-2 BL 500-2
Primary circuit (Exchanger)
Maximum operating temperature °C 110 110 110 110 110
Maximum operating pressure Mpa (bar) 1 (10) 1 (10) 1 (10) 1 (10) 1 (10)
Exchanger capacity litres 5.1 6.3 8.1 12.1 14.8
Exchange surface
m
2
0.76 0.93 1.2 1.8 2.2
Pressure drop at 3 m3/h
kPa 11 12 13 17 20
Secondary circuit (domestic water)
Maximum operating temperature °C 95 95 95 95 95
Maximum operating pressure Mpa (bar) 1 (10) 1 (10) 1 (10) 1 (10) 1 (10)
Water content litres 145 195 295 390 495
Weight
DHW calorifiers kg 76 89 111 144 171
Performances related to the type of appliance
Power exchanged
(1)
kW 26 33 39 56 66
Flow per hour (∆T = 35 °C)
(1)
litres per hour 640 810 960 1375 1620
Transfer capacity over 10 minutes (∆T = 30 °C)
(2)
litres per 10 min. 250 340 520 670 780
Maintenance consumption (ΔT=45K) kWh/24h 1.20 1.60 2.00 2.40 2.70
Performance N
L
2.5 4.7 11 15 19
(1) Primary temperature: 80 °C - Domestic cold water inlet: 10 °C - Domestic hot water outlet: 45 °C - Primary flow rate: 3 m3/h
(2) Primary temperature: 80 °C - Domestic cold water inlet: 10 °C - Domestic hot water outlet: 40 °C - Domestic hot water storage: 60 °C
BL 150...500-2 3. Technical description
18/11/2015 - 7607674-001-04
10