Reliable F3 User Manual

PANT PRESS

USER MANUAL

Model: F3

IMPORTANT SAFEGUARDS

When using an electric appliance, basic precautions should always be followed,
including the following:

WARNING: DANGER OF SCALDING

Read all instructions before using this pant press to reduce the risk of fire, electric
shock, or injury.

This product is designed for domestic use only.

? Do not use outdoors.
? Do not leave your pants press unattended while switched on. Turn off the switch

and unplug the electrical cord when not in use. To unplug, grasp the plug, not the
cord.

? Do not allow the pants press to be used as a toy. Close attention is necessary

when used near children, pets or plants.

? The appliance is not intended for use by any children or infirm persons without

supervision.

? Children should be supervised to ensure that they do not play with the appliance.
? Do not immerse the pant press into water or other liquids.
? Do not use with damaged cord or plug. If unit is not working as it should, has

been dropped, damaged, left outdoors, or immersed into liquid, contact a
licensed service technician for assistance.

? Do not pull or carry by cord, use cord as a handle, close a door on the cord, or

pull cord around sharp edges or coners. Keep cord away from heated surfaces.

? Do not use extension cords or outlets with inadequate current carrying capacity.
? Do not handle or use this unit while hands are wet.
? Use only as described in this manual. Operating unit in any way other than

recommended may result in damage to unit or injury to operator.

? Do not disassemble unit or attempt to make any repairs yourself. Incorrect

assembly or repair could result in a risk of fire, electric shock, or injury to
persons when operating.

? Store your pant press in a cool, dry place. Allow unit to cool completely, and

loop power cord loosely around unit before storing.

2

SAVE THESE INSTRUCTIONS

F3 pant press product information

A. Control panel
B. Storage for personal items (cuff link, keys ect.)
C. Safety chain
D. Press board bar
E. Press board
F. Front pressing plate
G. Foot
H. Cord wrap
I. Cord
J. Plug

K

. Support
L. Fabric button
M. Power/Start button
N. Indication Light
O. Coat hanger
P. Hanger support

N

POWER

M

3