Regency I3100 User Manual

I3100 Wood Insert

Wood Inserts

I3100 Large Wood Insert

Firebox height is 22-3/4" at highest point

27-1/2"

1-3/8"

3-7/8"

to front

face

6" Dia.

Flue

3-1/8"

16"

9-7/8"

6-7/8"

27-3/4"

32-5/16"

Minimum Fireplace Opening

Height 25” (635mm)

Width 28” (711mm)

Depth 17” (432mm)

Faceplate Dimensions

Standard 44” (wide) x 32” (height)

Oversize 50” (wide) x 34.5” (height)

12-7/8"

Faceplate

Dimension Description I3100

A Adjacent Side Wall (to side) 13” (330mm)

B Mantle (to top)** 19” (480mm)

C Top Facing (to top) 18” (455mm)

D Side Facing (to side) 6-1/2” (165mm)

E Minimum Hearth Extension* 16” (406mm)

F Minimum Heath Thickness* 1-1/2” (38mm)

G Minimum Hearth Side Extension 8” (205mm)

Side and Top facing is a maximum of 1-1/2" thick.

Floor protection must be non-combustible, insulating material with an
R value of 1.1 or greater.

* If the hearth extension is fl ush with the fl oor (F) it must extend

19-1/2" in front of the body face (E).

Note: Hearth Extension Width (G) is measured from edge of fuel

door to side of hearth.

Wood Inserts

** A non-combustible mantel may be installed at a lower height if the

framing is made of metal studs covered with a non-combustible
board.

190 June 2007 Regency Product Specifi cations Book