Regency FireWizard User Manual
REMOTE CONTROL
OPERATING INSTRUCTIONS
918-582a 07/11/06
© Copyright 2006, FPI Fireplace Products International Ltd. All rights reserved.
FPI FireWizardTM Remote Control Manual Page 1
WARNING
Shock Hazard
Can cause severe injury or death.
This device is powered with line voltage.
Do not try to open or repair the control box. There are no internal serviceable
parts.
CAUTION
Property Damage Hazard
Excessive heat can cause property damage.
The fireplace can stay ignited for many hours. Take care to turn off the fireplace if
it is left unattended by adult people.
Keep remote control out of reach of children.
IMPORTANT!
The transmitter and receiver in this box must be coded together before
proceeding to program the remote control in order to function.
Please see the instructions under “Matching Remote Handset and Control
Box ID Code”, and follow the coding instructions carefully. Failure to code these
together will result in malfunction of the remote control device.
FireWizardTM is a trademark of FPI Fireplace Products International Ltd. Printed in Canada
TABLE OF CONTENTS
Matching Remote Handset & Control Box ID Code .......................................................... 4
Remote Control Keypad ..................................................................................................... 5
Remote Control Screen Display (LCD).............................................................................. 6
Quick Reference of Basic Functions................................................................................... 7
Switching the Remote ON and OFF .............................................................................. 7
Setting Time & Day ...................................................................................................... 7
Manual and Auto Mode ................................................................................................ 8
Displaying Temperature in Celsius or Fahrenheit ........................................................ 8
Manual Mode ..................................................................................................................... 9
Fan Speed Adjustment ................................................................................................... 9
Flame Height Adjustment ............................................................................................ 10
Auto Mode ........................................................................................................................ 11
Program Mode .................................................................................................................. 12
Setting the Program Mode ................................................................................................ 13
Interfacing with Manual Control ...................................................................................... 18
Troubleshooting / Battery Replacement ........................................................................... 18
Special Conditions in Program Mode.......................................................................... 19
FPI FireWizardTM Remote Control Manual Page 3
1.1.1.
Matching Remote Handset and Control Box ID Code
The Remote Control Handset has a set of unique ID codes that is pre-programmed into its
memory. This set of ID codes helps to differentiate one Remote Control Handset from
another so that only the control box with a matching ID code will respond to the
appropriate Remote Control Handset.
To ensure the remote control is matched to the receiver correctly, please follow the steps
below:
1. Ensure that the Remote Control and the 3-way switch located at the appliance are
both in the OFF position.
2. Ensure that the pilot is lit and the pilot control knob is in the ON position on the
appliance.
3. Install the 2 x AAA alkaline batteries into the Remote Control.
4. Unplug and re-plug the power cord. The power cord is located on the left hand
side of the appliance and will be plugged into the receptacle.
5. Switch the 3-way switch located on the appliance to the REMOTE position.
6. Press and hold the PROG and FAN buttons simultaneously for up to 20 seconds.
During this time, the remote will display LC while it is transmitting codes to the
receiver. Once it is successfully transmitted, one will hear the solenoid click and
the burners will come on. If is does not work the first time, repeat steps 1 - 6.
7. Release both the PROG and FAN buttons. The remote will revert back to normal,
but the burner will still be on.
8. Press the ON/OFF button on the remote control 2 times to turn the burner off.
9. The remote control is now programmed to the receiver and the appliance can now
be operated with it.
The control box will only learn the Remote ID codes during the first 30 seconds after
power is applied and will ignore this special command from the Remote after the first 30
seconds.
NOTE: This must only be performed by a qualified installer.
Page 4 FPI FireWizardTM Remote Control Manual
The FireWizardTM Remote Control was developed to provide a user-friendly system to
operate your appliance. The operating range is approximately 10 metres (32 feet).
A Quick Reference Sticker is available to be placed on the back of your remote control
handset. Place the sticker close to the very top of the remote, away from the battery
opening and wall mounting bracket.
REMOTE CONTROL KEYPAD
There are 7 push buttons on the Remote Control:
(1) ON/OFF Button: Switches the Remote & Control Box ON or OFF;
(2) “+” Button: This is the INCREMENT
(3) “-” Button: This is the DECREMENT
(4) AUTO/MAN Button: Toggles between Manual, Auto and Program mode
(5) TIME Button: Initiates the setting of the Time and Day
(6) PROG Button: Initiates the programming of Auto mode;
or HOUR button;
or MINUTE button;
;
;
(7) FAN Button: Changes the speed of the fan;
(2) “+” Button
(4) Auto/Man Button
(6) Prog Button
(1) On/Off Button
(3) “-” Button
(5) Time Button
(7) Fan Button
FPI FireWizardTM Remote Control Manual Page 5
REMOTE CONTROL SCREEN DISPLAY (LCD)
The LCD provides the following display features:
1. Flame Height Indication;
2. Manual & Auto Mode Indication - “MANUAL” / “AUTO”;
3. “ROOM” or “SET” Temperature Indicator;
4. Day of the Week;
5. Transmit Indicator “ ” ;
6. System Status Indicator “ON” or “OFF”;
7. Battery Low Indicator “ ”
8. Programmed Mode Indication “PROG 1” / “PROG 2”;
9. Temperature Display in “ºC” or “ºF”;
10. Fan Speed Indication;
11. Time of Day with AM, PM;
Page 6 FPI FireWizardTM Remote Control Manual
Loading...