Reese 58516 User Manual

INSTRUCTION MANUAL

Isolator Installation

You can take it with you.

DEALER/INSTALLER:

(1) Provide this Manual to end user.
(2) Physically demonstrate hitching and unhitching
procedures in this Manual to end user.
(3) Have end user demonstrate that he/she
understands procedures.

Product No.

20K

Plymouth MI

END USER:

(1) Read and follow this Manual every time you use hitch.
(2) Save this Manual and Hitch Warning Hang Tag for future reference.
(3) Pass on copies of Manual and Hitch Warning Hang Tag to any other
user or owner of hitch.
(4) Never remove hitch warning decals as shown on the cover of this
manual. If damaged, contact Reese (1-888-521-0510 or
www.reeseprod.com) for free replacement.

58516

Isolator Snubbers

1. Remove head assembly from crossmember and pivot beam (2 pivot pins & 2 klik pins) –
retain for reinstallation

2. Push out the old isolators (yellow)

3. Apply white lithium grease to the outside edges of the orange isolators

4. Place the isolators in the pivot beam, using a rubber mallet drive the orange isolators into

place.

5. The orange isolators should be flush with the outside edge of the pivot beam.

6. Re-assemble to the head pan assembly.

For Installation Assistance or Technical Help, Call 1-888-521-0510

58516N-08OCT2013 PCN2564 ©2001 REESE PRODUCTS, INC LITHO IN USA