Reely Crawler User manual

18428-B 1:18 2.4G electric four-wheel drive
remote control car climbing Instructions

Dear Customer: Thank you for purchasing our products Weili, please carefully before handling the product read
the instructions before you start working with, and ask you to keep a good specification to facilitate future
inspection if necessary.

The main parameters

1. Product Code: 18428-B

2. Product Name: 1:18 electric four-wheel drive remote
control car climbing

3. Material: Plastic / Metal / Electronic Components

4. Remote control distance: ≥80M

5. Frequency: 2.4G

6. Remote Control Car Battery: 4.8V rechargeable
battery pack

7. Remote control Battery: "AA" 1.5V × 4 (purchase)

Function buttons and components Name Description

Navigation adjustment lever

Remote control car
battery cover

Power switch

Power Indicator

Power switch

NO

OFF

Remote control battery cover

Battery Installation

1, shown in Figure 1, the remote control to open the battery cover, according to the polarity of the battery
box to identify the correct loading section 4 "AA" batteries (sold separately), then cover the battery cover.
2, 2, open the battery cover remote control car at the end, will be packaged into a rechargeable battery inside
the vehicle battery, as the power plug is connected properly identified, positive to positive (red) and negative
to negative (black line) , cover the remote control car battery cover lock screw.

8. Remote control cars Size: 269 * 167 * 126mm
(length X width X height)

9. Remote control size: 118 × 72 × 179 mm
(length X width X height)

10. Age: 8 years old

11. Charging time: 2-3 hours

12. Driving time: 15 minutes

13. Driving speed: 8km / h

remote control

Steering wheel

trigger

High-performance battery pack

USB charging cable

1

2

figure 1

3

2

1

figure 2

Rechargeable battery charging method

1. The new battery pack (NI-CD or NI-MH), needs to be charged before use.

2. When charging, the battery pack first wire plug in the USB charging cable plug, the USB charging cable
and then plug in the socket interior with a USB socket on. (Eg: Smart phone charger plug, USB plug
computer, laptop USB port, etc.)

3.USB charging cable with LED lights, LED lights flashing
when slow, which means normal charging status, the
battery pack is being charged when the LED, such as
automatic off, the battery pack is fully charged. Found
LED flashes fast, this indicates abnormal charging
condition, please carefully check the battery pack and
USB cable is abnormal.

4. Charging time is about 2-3 hours, please do not overcharge,
over-charging for a long time does not make power increase.

USB charging
cable Interface

Rechargeable
Battery Interface

5. The battery pack was found, and USB charging cable is
damaged, stop using it immediately and replace parts as
soon as possible.

High-performance

battery pack

Note:

☆Only use the product configuration of the USB cable to charge the battery while charging product.
☆Do not modify the battery or decomposition cell, in order to avoid fire and explosion hazard.
☆Do not fall from a height or battery into fire to avoid fire and explosion hazard.
☆Do not squeeze the battery, impact, puncture, to avoid fire and explosion hazard.
☆Do not put the battery prolonged exposure to sunlight, to avoid danger.
☆After the remote control car with the battery should be removed, and after cooling and fully charge

resting in a safe position. When not charging the battery plug from the USB charging line unplug and
disconnect the power.
☆The battery is stored at temperatures below 30 ° is appropriate, can not be stored in the heat source,
temperature, humidity and other places, to avoid danger.
☆Or charging the battery using the process have a smell or appear Zhou Ranbian heat, deformation,
discoloration or other anomalies, please stop using the battery immediately.
☆After the completion of the battery with a high temperature, it is recommended to wait about 30 minutes
before charging the battery, as this may damage the battery.
☆If you have questions about the process of charging the battery, please contact with our company or dealer.

Method of operation

1, the remote control car switch in "ON" position, press the remote
control switch, LED lamp on the remote control flashes regularly,
hand-made rotary knob on the remote control, when the lights
stop flashing, the remote display with the remote control car has
completed the code, you can start remote control cars.
2, when the remote control push back the trigger remote control
car forward, so when the trigger is pushed forward, remote
control cars braking (stop running) when the trigger is pushed
forward in the intermediate state, remote control car back,
release the trigger remote control car stopped running, push
the trigger magnitude size can be controlled with the remote
control car speed. (As shown in Figure 1)
3, when the remote steering wheel to the left / right rotation, the
remote control car front left / right turn. (as shown in picture 2)
4, can be combined with remote control car forward left / right
steering control, remote control cars will advance the process
of the steering wheel to the left / right rotation when the remote
control car to move forward, turn left / right turn with. (As shown
in Figure 3)
5, remote control cars back can be combined with the left / right
steering control, remote control cars will reverse the process
of steering wheel to the left / right rotation when the remote
control car driving backward, turn left / right turn. (As shown
in Figure 4)
6, when the remote control car in a straight line with offset to the
left, move the guide line adjustment lever to the right adjustments
until the remote control car restore the correct travel route. When
the remote control car shifted to the right when traveling straight,
set the adjustment lever to the left guided fine-tuning until the
remote control car restore the correct travel route. (Figure 5)

Reminder:

1, this product is suitable for the rough cement flat surface remote
control, if the remote control on slippery ground, due to the
friction between the tires and the car Aberdeen small, production
is not likely to go straight or turn 180 ° turn around or walking
around in circles and so on ; when the remote control car remote
control trigger start walking slowly on the need to promote the
move easier handling car Aberdeen.
2, when the remote control car battery is low, remote control car
speed will be significantly slower or automatically protection
function (which can not only turn forward or backward), then
please recharge the battery or put a new battery can be fully
charged normal; when power indicator appears on the remote
control slow flashing, indicating the remote control battery power
into the low pressure, then replace the new battery, if they continue
to control when the remote control to enter the low pressure, remote
control distance may become shorter and cars Aberdeen there also
may be out of control.
3, when the remote control cars after using the remote control car
power switch in "OFF" place, and then turn off the power switch on
the remote control, if not used for long, remove the battery remote
control cars and remote control, and remote control cars the fully
charged battery put in a safe position to avoid battery leakage or
other failure of the product is damaged, and with a clean rag and
wipe clean this product can be.

Figure 1

Figure 2

Figure 3

Figure 4

Navigation
adjustment lever

Figure 5

Caveat:

NO

OFF

NO

OFF

NO

OFF

NO

OFF

* Follow the instructions on the packaging or instructions properly installed and used some of the parts
required to assembly and commissioning by an adult.
* Please accompanied by an adult, under the guidance of use.
* Please put away the packaging material, in order to avoid harm to children.
* Do not place in water or in the rain ,, product handling wet parts may cause malfunction.
* Do not touch the rotating wheel, so as not to cause unnecessary harm.
* Product contains small parts may have eating or suffocation hazard.
* Non crowd remote control or on the road to avoid accidents.
* The need to regularly check the charging USB cable, plug, housing and other components found damaged
should immediately discontinue use until the repair intact.
* This product can only be used to configure the original USB cable to charge the battery products.
* USB cable, battery boxes, battery to be inserted and marked on the product designated power.
* USB charging cable, battery is not a toy.
* Toys should be disconnected before cleaning the charging USB cable.
* When the remote control in case of thunder, lightning weather, stop the remote control immediately.
* When installing or replacing the battery, the battery should pay attention to correct polarity.
* Remote control cars use rechargeable batteries.
* The remote control uses Section 4 1.5V "AA" batteries (sold separately)
* Do not short circuit the battery, disassemble, modify, impact, crush, puncture, drop height, medium into
the fire, to avoid danger.
* Do not leave the battery in prolonged exposure to sunlight, to avoid danger.
* When storing the battery temperature below 30 ℃ is appropriate, can not be stored in the heat source,
temperature, humidity and other places, to avoid danger.
* Non-rechargeable battery can not be charged.
* Charging the rechargeable battery, you need adult supervision.
* Rechargeable batteries in toys should be removed before charging.
* Do not mix old and new or different types of batteries.
* Exhausted battery should be taken out.
* Terminals shall not shorted.
* Do not use the product for a long time, remove the remote control cars and remote control batteries.
* Important Information This manual contains packaging and products, please give retained.

-1-

-2-

-3-

-4-