Reebok Fusion User Manual
1
Fusion TREADMILL
BEFORE YOU BEGIN
Congratulations for selecting the Fusion Motorized Treadmill from Reebok. Whether you are an accomplished athlete
seeking to maintain peak performance or a beginner realizing the benefits of exercise for the first time, the fusion Motorized
Treadmill will help you to achieve your goals. In the “Hints to Help You” section of this manual we have outlined some tips
that we hope will help you maximize the effectiveness and fun of your workouts.
In the meantime, remember that the benefits of exercise are many and varied including higher energy levels, reduced
stress, improved self-esteem, clearer and more radiant skin, greater cardiovascular efficiency, higher metabolic rate, and
improved body posture – all of which can result in a longer and more enjoyable life.
While purchasing the Fusion Motorized Treadmill will not do all of this alone, it is an important step towards understanding
and achieving the benefits of exercise.
All Reebok products are manufactured to the highest specifications and this
instruction manual should enable you to assemble the Fusion Treadmill and
commence your workout programme. If, however, you have any additional
questions, please call out UK Customer Service on +44 (0) 871 474 2614. To help
us assist you, please quote the product model number and batch number when
calling. The model number is REV-11301. The serial number can be found on a
sticker attached to the Reebok Fusion (located on the left hand side of the treadmill
base next to the mains power cord inlet).
Opening Carton/Assembling Your Product
2
Fusion TREADMILL
CONTENTS
Before you Begin 01
Precautions 03
Contents checklist 04
Hardware comparison chart
Parts List 06
Parts diagram
Assembly Instructions 17
Stabilizer adjustment
Locking pin
Level adjustment
Computer instructions
Computer operation
Heart rate control operation
Helpful hints
Stretching routine
How to maintain the fusion treadmill
Troubleshooting
Ordering replacement parts / limited warranty 38
Warning
Before beginning this or any exercise programme, consul your physician. This is especially important for persons who
have not exercised regularly before or persons with pre-existing health problems. Read all instructions before using.
Reebok® assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Questions?
As a manufacturer, we are committed to providing complete customer satisfaction. If you have any questions, or if parts
are missing or damaged, we guarantee complete satisfaction.
TO AVOID UNNECESSARY DELAYS, PLEASE CALL OUR CUSTOMER HOTLINE DIRECT. The trained technicians on
our customer hotline will provide immediate assistance free of charge.
UK Customer Hotline: 0871 474 2614
UK Customer Services: RFE International Ltd.; DSV House, Maidstone Road; Kingston, Milton Keynes MK10 0AJ
UK Email: techsupport@rfeinternational.com
Caution
Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.
Model No: REV-11301
Serial No: for example : REV-11301/0508/000001
Write the serial number and mfr date in the space above for future reference. (Located on the left hand side of the treadmill
base next to the mains power cord inlet.)
05
10
20
23
24
25
26
31
32
33
36
37
3
Fusion TREADMILL
PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions
and information before operating the treadmill.
1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and
precautions.
2. Use the treadmill only as described in this manual.
3. Place on a level surface, with 2m of clearance behind it. To protect the floor or carpet from damage, place a mat under
the treadmill.
4. When choosing a location for the treadmill make sure that the location and position permit access to a plug.
5. Keep the treadmill indoors, away from moisture or dust. Do not put the treadmill in a garage or covered patio, or near
water.
6. Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
7. Keep children under the age of 12 and pets away from the treadmill at all times.
8. The treadmill should not be used by persons weighing more than 110kg.
9. Never allow more than one person on the treadmill at a time.
10. Wear appropriate exercise clothing when using the treadmill. Do not wear loose clothing that could become caught in
the treadmill. Athletic support clothes are recommended for both men and women. Always wear athletic shoes. Never
use the treadmill with bare feet, wearing only stockings, or in sandals.
11. When connecting the power cord, plug the power cord into an earthed circuit. When replacing the fuse, an ASTA
approved BS 1362 type should be fitted to the fuse carrier. A 13 amp fuse should be used. No other appliance should
be on the same circuit.
12. If you need an extension cord, use only 14 gauge cord of 1.5m or less in length.
13. Keep the power cord away from heated surfaces.
14. Never move the walking belt while the power is turned on. Do not operate the treadmill if the power cord or plug is
damaged, or if the treadmill is not working properly. (See “Troubleshooting” Page 39. If the treadmill is not working
properly.)
15. Never start the treadmill while you are standing on the walking belt. Stand on the side rails hold the handrails start the
unit at a low speed and then step on to the unit, when comfortable increase the speed to one that you’re comfortable
with..
16. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed.
17. The pulse sensor is not a medical device. Various factors, including the user’s movement, may affect the accuracy of
the heart rate readings. The pulse sensor is intended only as an exercise aid in determining heart rate trends in
general.
18. Never leave the treadmill unattended while it is running. Always remove the safety key when the treadmill is not in use.
19. Do not attempt to raise, lower, or move the treadmill until it’s properly assembled. (See Page 17 “Assembly” and Page
22 “Folding the Treadmill”)
20. Do not change the incline of the treadmill by placing objects under the treadmill.
21. When folding or moving the treadmill make sure the “power fold switch is fully engaged” (See Page 22 “Folding”)
22. Inspect and tighten all parts of the treadmill regularly. (See page 37 “Maintenance”)
23. Never drop or insert any object into any opening in/on the treadmill.
4
Fusion TREADMILL
CONTENTS CHECKLIST
Carton contents:
For your convenience, we have identified the contents of the shipping carton. Please check to make sure you have all of the
components before assembly. This chart is provided to help you identify the components used in the assembly of this
product.
No. Description Qty.
A Main Frame Assembly 1
5
Fusion TREADMILL
HARDWARE COMPARISON CHART
Hardware Pack:
The hardware fitting and tools required for assembly are packed in a bag with in the main carton. These are referenced by a
numerical code as outlined in the parts list (page 6). The pack configuration is shown below in order to ease identification.
Please open the bag carefully and place them on a piece of card, as below, to easily identify the parts before assembly.
NOTE: We suggest that you do not open the hardware pack until you are ready to assemble your FUSION TREADMILL .
When you open the pack, please do so carefully to ensure that the pieces remain in their position by their identification
numbers.
NO. DESCRIPTION QTY.
805
M8×43mm Bolt
4
806
830 M8x18 Allen head cap screw 4
107 Safety Key 1
∮8 Washer
A Allen Wrench 1
B Power Cord 1
C Lock Pin 1
8
B
C
MILIMETERS
6
Fusion TREADMILL
PARTS LIST
No. Description Qty. Order No.
100
101 Overlay 1
102 Computer insert 1
105 Console housing -upper 2
106 Console Housing-lower 1
107 Safety key 1
108 Safety Key Base 1
111 Hand pulse sensor wire 1
113 Computer insert holder 1
200
201 Handle Bar 1
202 Hand Pulse Sensor 2
203 Foam Grip 2
204 Handle Bar Insert 2
205 Hand Pulse Sensor cushion 2
300
301 Upright – Right 1
302 Upright – Left 1
303 7 PIN wire 1
304 Wire #2050 1
305 1100X800 Wire 1
306 Power Switch Plate Base 1
307 Power Switch Board 1
308 Power Switch 1
309 Power Switch Breaker 1
310 Electric Outlet 1
Console Assembly
Handle Bar Assembly
Upright Assembly
REV11301-101
REV11301-102
REV11301-103
REV11301-104
REV11301-105
REV11301-106
REV11301-107
REV11301-108
REV11301-201
REV11301-202
REV11301-203
REV11301-204
REV11301-205
REV11301-301
REV11301-302
REV11301-303
REV11301-304
REV11301-305
REV11301-306
REV11301-307
REV11301-308
REV11301-309
REV11301-310
Description Qty. Order No.
7
Fusion TREADMILL
PARTS LIST
400
401 Motor Hood 1
402 DC Motor 1
403 Motor Bracket 1
404 Driving Belt 1
405 Motor Cover – Bottom 1
406 Control Board 1
407 Shaft 1
408 Triangle Plastic Cap - Upper 2
409 Shaft Cover 4
410 Triangle Plastic Cap - Bottom 2
411 Triangle Plastic Cap Base 2
412 Incline Motor Steel Tube 1
413 Incline Motor Holder Bushing 1
414 Incline Motor 1
415 Steel Bushing 2
.
500
501 Base Frame 1
502 Foot Plate 1
503 Rubber Cushion 4
504 Rear Caster Cover-Left 1
505
506 Rear Caster Cover-Right 1
∮50 Rear Caster
600.
601 400X2512 Running Belt 1
602 Side Rail 2
603 Side Rail End Cap-Left 1
604 Side Rail End Cap-Right 1
605 597X1100X14 Running Deck 1
606
607 Side Rail Holder 8
700
701 Main Frame 1
702 Front Roller 1
∮30X2 Running Deck Mat
Deck Frame Assembly
Base Frame Assembly
Motor Assembly
Running Deck Assembly
REV11301-401
REV11301-402
REV11301-403
REV11301-404
REV11301-405
REV11301-406
REV11301-407
REV11301-408
REV11301-409
REV11301-410
REV11301-411
REV11301-412
REV11301-413
REV11301-414
REV11301-415
REV11301-501
REV11301-502
REV11301-503
REV11301-504
2
REV11301-505
REV11301-506
REV11301-601
REV11301-602
REV11301-603
REV11301-604
REV11301-605
8
REV11301-606
REV11301-607
REV11301-701
REV11301-702
8
Fusion TREADMILL
No. Description Qty. Order No.
PARTS LIST
703 Front Roller Shaft 1
704 Fold Up Support Tube 1
705 Small Wheel 1
706 Rear Roller 1
707 Rear Roller Shaft 1
708 Rear Caster 2
800
801
802
803
804
∮3.5X14 Screw
∮3X10 Screw
∮3X14 Screw
∮4X14 Screw
Fastening
805 M8X43 Allen Head Cap Bolt 8
806
807
∮8 Washer
∮4X40 Screw
808 M6X20 Screw 4
809
∮4X19 Screw
810 M6X45 Allen Head Cap Screw 3
811
∮6 Washer
812 M10X42 Allen Head Square Bolt 1
813
∮10 Washer
814 M10 Nut 4
815 Washer 3
816 M5X18 Screw 5
817 M6X15 Screw 2
818 M10X66 Allen Head Cap Bolt 1
819 M8X30 Allen Head Screw 4
820 M5 Screw 1
821
∮Washer
822 M10X30 Allen Head Bolt 1
823 M8 Nut 5
824 M8X47 Square Bolt 1
825 M8X85 Motor Adjustment Bolt 1
826
827
∮35X6 Spring Washer
∮25X12 PU Mat
828 M8X12 Screw 2
829
∮8 Spring Washer
REV11301-703
REV11301-704
REV11301-705
REV11301-706
REV11301 -707
REV11301 -708
10
REV11301-801
4
REV11301 -802
1
REV11301 -803
31
REV11301 -804
REV11301 -805
20
REV11301 -806
2
REV11301 -807
REV11301 -808
18
REV11301 -809
REV11301 -810
3
REV11301 -811
REV11301 -812
4
REV11301 -813
REV11301 -814
REV11301-815
REV11301 -816
REV11301 -817
REV11301 -818
REV11301 -819
REV11301 -820
1
REV11301 -821
REV11301 -822
REV11301 -823
REV11301-824
REV11301 -825
2
REV11301 -826
1
REV11301 -827
REV11301 -828
2
REV11301 -829
No. Description Qty. Order No.
9
Fusion TREADMILL
PARTS LIST
830 M8X18 Allen Head Cap Screw 4
831 M16X73 Allen Head Bolt 2
832
833 M8X45 Allen Head Cap Screw 2
834 M8X30 Screw 10
830 M8X18 Allen Head Cap Screw 4
831 M16X73 Allen Head Bolt 2
∮12 Washer
REV11301 -830
REV11301 -831
2
REV11301 -832
REV11301 -833
REV11301 -834
REV11301 -830
REV11301-831
10
Fusion TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
11
Fusion TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
203
204
807
806805
205
202
202
204
205
201
203
806
805
807
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED AT THE FACTORY.
12
Fusion TREADMILL
PARTS DIAGRAM
305
304
809
310
802
309
809
303
211
308
307
311
303
307
301
306
302
304
303
305
Loading...