Red Lion SLX-8ES-6, SLX-8ES-7 Data Sheet
SLX-8ES-6/7 Ethernet Switch
THREE FIBER INDUSTRIAL ETHERNET UNMANAGED SWITCH
SLX-8ES-6/7
PRODUCT DATASHEET
Sixnet Networking Series
Three Fiber Industrial Ethernet Unmanaged Switch
The SLX-8ES-6/7 is an 8 port industrial Ethernet
unmanaged switch featuring 3 noise-immune
Fiber optic ports. This ruggedized switch is
industrial hardened to provide superior reliability
for long term operation. They require no user
setup and immediately start operating as soon
as you power them up.
PRODUCT HIGHLIGHTS
n
Three 100 Mbps ber optic ports for noise
immune links up to 120 km
n
Slim packaging ts on your DIN rail
n
High performance and value
n
Truly industrial hardened design
n
Dual power inputs keeps you running
n
Plug & play saves you time and money
REAL-TIME OPERATION
n
Intelligent routing - No collisions!
n
Ideal for any 10/100 Ethernet system
PLUG AND PLAY SIMPLICITY
n
Auto-sensing for speed and duplex
n
Auto-mdi/mdix-crossover and auto-polarity
TROUBLE FREE OPERATION
n
Ultra-reliable 1,000,000+ hours MTBF
n
-40 to +85°C operating range
n
UL, CSA (CUL), CE and Hazloc
(Zone 2) rated
n
Dual power inputs with spike/surge protection
n
Rugged corrosion-resistant aluminum case
n
DIN rail or direct panel mounting in multiple
positions – No accessories required!
FIVE 10/100 RJ45 AND
THREE FAST ETHERNET
FIBER OPTIC PORTS
SIXNET KNOWS INDUSTRIAL –
We have been designing industrial hardware such
as Remote Terminal Units for over 30 years and
have used this expertise to design the toughest
Ethernet switches on the market. Don’t trust your
critical communications to so-called industrial
hardware from commercial switch manufacturers.
SIXNET switches give you proven assurance that
your system will keep running for years to come.
SLX-8ES-6/7 Specifications
SLX-8ES-6/78 PORT INDUSTRIAL ETHERNET UNMANAGED SWITCH
ETHERNET PERFORMANCE
STANDARD COMPLAINCE
See the User Manual for a More Detailed Diagram
n
Unmanaged with 8 Ethernet ports
n
Ethernet switch type: Intelligent store and
forward wire speed
n
Ethernet protocols supported: All IEEE 802.3
n
RJ45 ports (shielded): 10/100BaseTX
n
RJ45 speed (10 or 100 Mbps): Auto-negotiation
n
RJ45 MDI/MDIX and TD/RD: Auto-crossover and
auto-polarity
n
Fiber optic port speed: 100BaseFX (100 Mbps)
n
Fiber optic port wavelength: 1300 nm center
n
Fiber multimode (mm) typical: 50 or 62.5/125 um (SC or ST)
n
Fiber singlemode (sm) typical: 9 or 10/125 um (SC or ST)
n
Fiber max. distance (full duplex) (see web for details)
4 km (mm), 20 (sm) or 40 km (long haul) or more
(contact SIXNET)
n
See separate datasheet for complete ber transceiver details.
n
Typical latency for 100M ports
p
5 us + frame time
p
Varies on load
n
Typical latency for 10M ports
p
16 us + frame time
p
Varies on load
n
Fiber duplex operation: Full duplex
n
MAC addresses supported: 1024
n
Memory bandwidth: 3.2 Gbps
n
Ethernet isolation: 1500 VRMS 1 minute
ETHERNET COMPLIANCE
n
IEEE 802.3
(10Mbps Ethernet supports legacy devices)
n
IEEE 802.3u
(Fast Ethernet 100Mbps for newer devices)
n
IEEE 802.3x
(Full-Duplex with Flow Control)
POWER INPUT
n
Redundant input terminals
n
Input power consumption: 8.0 W
(typical w/ all ports active)
n
Power input voltage: 10-30 VDC
p
Transient protection: 15,000 watts peak
p
Spike Protection: 5,000 watts (10 times for 10 uS)
ENVIRONMENTAL
n
Operating temperature range
p
-40 to +75 °C
p cold startup @ -40°C
n
Storage temperature range:-40 to +85 °C
n
Humidity (non-condensing):
p 5 to 95% RH
p
Conformal coating is available – contact SIXNET
n
Vibration: IEC68-2-6
n
Maximum Operating Altitude: 30,000 ft.
n
Electrical safety - UL508/CSA C22.2/14, EN61010-1, CE
n
EMC - FCC part 15, ICES-003, EN55022, EN61000-6, CE
n
Hazardous locations: UL1604/CSA C22.2/213 (Class I, Div. 2);
EN60079-15 (Zone 2, Category 3), CE (ATEX)
n
Maritime rated for marine & offshore per ABS
n
Eye safety (ber models) - IEC60825-1, Class 1; FDA 21 CFR
1040.10 and 1040.11
PHYSICAL
n
DIN rail or direct panel mounting
n
Packaging: Aluminum with IP40 protection
n
Weight: 11 oz. (0.31kg)
n
Dimensions – see mechanical diagram
All specications are subject to change. Consult factory for latest info.
MECHANICAL DRAWING
5.20"
[13.21 cm]
1.60"
[4.07 cm]
ORDERING GUIDE
SLX-9ES-###
SLX-8ES-6SC
SLX-8ES-6ST
SLX-8ES-7SC
SLX-8ES-7ST
Special, mixed or long haul (up to 120km) ber transceivers are
available for special order. Contact Sixnet for details.
ACCESSORIES:
ET-PS-024-02
SP-ETH-2
3.82"
[9.70 cm]
Removable
Screw Block
SC Fiber
or
4.70"
[11.94 cm]
ST Fiber
Removable DIN clip f or
direct panel mount ing
Panel mounting ears
accept up to a # 12
screw on new er models
See separate datasheets for unmanaged
slim line models with only 1 ber optic port
Unmanaged with 5 RJ45 ports & 3 multimode
ber optic port with SC or ST style connector
Unmanaged with 5RJ45 ports & 3 singlemode
ber optic port with SC or ST style connector
Industrial power supply – AC to 24VDC, 2A,
with compact packaging, DIN rail mount
Dual port surge & lightning protector
Snaps to
standard
DIN Rail
EN50022
(35 mm)
Console Port(s)
4.21"
[10.70 cm]
Loading...