SL/SLX-5/8/9ES-1/2/3UNMANAGED INDUSTRIAL ETHERNET SWITCHES SPECIFICATIONS
All specications are subject to change. Consult factory for latest info.
ETHERNET PERFORMANCE
n
Unmanaged with 5, 8 or 9 Ethernet ports
n
Store & forward wire-speed switching
n
Automatic address learning, aging and migration
n
Full duplex operation with ow control (no collisions)
n
All IEEE 802.3 Ethernet protocols supported
n
1024 MAC addresses supported
n
Memory bandwidth 3.2 Gbps
n
Typical latency (varies on load)
p
@ 100 Mbps: 5 µs + frame time
p
@ 10 Mbps: 16 µs + frame time
n
Ethernet isolation 1500 VRMS 1 minute
ETHERNET PORTS
n
Shielded RJ45 ports for 10/100BaseTX
p
Auto-negotiation for 10 or 100 Mbps
p Auto- MDI/MDIX-crossover for either cable type
p
Auto-polarity corrects for crossed +/- signals
n
Fiber optic port speed 100BaseFX (100 Mbps)
n
Fiber duplex operation: Full duplex
n
Fiber wavelength: 1300 nm center (typical)
n
Fiber max. distance (full duplex) (see web for details)
p
4 km for multimode 50 or 62.5/125 µm (SC or ST)
p
20 km for singlemode 9 or 10/125 µm (SC or ST)
p
40 km (long haul) or more (contact Sixnet)
ETHERNET COMPLIANCE
n
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
n
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
n
IEEE 802.3x (Full-Duplex with Flow Control)
POWER INPUT
n
Power input voltage: 10-30 VDC
n
Redundant input terminals
n
Input power (typical - all ports active at 100 Mbps)
p
2.0 W (5-port without ber)
p
3.0 W (5-port including 1 ber)
p
4.0 W (8-port without ber)
p
5.0 W (9-port including 1 ber)
n
Transient protection: 15,000 watts peak
n
Spike protection: 5,000 watts (10 times for 10 uS)
ENVIRONMENTAL
n
Operating temperature
p
SL models: -40 to +60°C
p
SLX models: -40 to +85°C (cold startup at -40)
n
Storage temperature: -40 to +85 °C
n
Humidity (non-condensing) 5 to 95% RH
n
Vibration and shock: IEC60068-2-6
n
Maximum Operating Altitude: 30,000 ft. (SLX models)
MECHANICAL DRAWINGS
STANDARDS COMPLIANCE
n
Electrical safety - UL508/CSA C22.2/142, EN61010-1, CE
n
EMC - FCC part 15, ICES-003, EN61000-6, CE
n
Hazardous locations: ANSI/ISA 12.12.01/CSA C22.2/213
(Class I, Div. 2); EN60079-15 (Zone 2, Category 3), CE (ATEX)
n
Maritime rated for marine & offshore per ABS
n
Eye safety (ber models) - IEC60825-1, Class 1; FDA 21 CFR
1040.10 and 1040.11
PHYSICAL
n
Din-rail or direct panel mounting
n
Ingress protection:
p
SL models: IP30
p
SLX models: IP40
n
Case: UL94V0 Lexan (SL) or Aluminum (SLX)
n
Weight:
p
4 oz (0.11 kg) – SL-5ES
p
6 oz (0.17 kg) – SLX-5ES, SL-8/9ES
p
8 oz (0.23 kg) – SLX-8/9ES
n
Dimensions – see mechanical diagram below
ORDERING GUIDE
SLX-5ES-1 5 RJ45 10/100 ports
SLX-5ES-2SC 4 RJ45 ports and 1 mm ber SC, 4 Km
SLX-5ES-2ST 4 RJ45 ports and 1 mm ber ST, 4 Km
SLX-5ES-3SC 4 RJ45 ports and 1 sm ber SC, 20 Km
SLX-5ES-3ST 4 RJ45 ports and 1 sm ber ST, 20 Km
SLX-6ES-4/5 Dual ber - see separate datasheet
SLX-8ES-1 8 RJ45 10/100 ports
SLX-8ES-6/7 Three ber - see separate datasheet
SLX-9ES-2SC 8 RJ45 ports and 1 mm ber SC, 4 Km
SLX-9ES-2ST 8 RJ45 ports and 1 mm ber ST, 4 Km
SLX-9ES-3SC 8 RJ45 ports and 1 sm ber SC, 20 Km
SLX-9ES-3ST 8 RJ45 ports and 1 sm ber ST, 20 Km
SL- w/Lexan case and limited temperature
ET-PS-024-02 2 Amp, AC to 24 VDC Power Supply
SP-ETH-2 Dual Ethernet port surge & lightning protector
Contact Sixnet for special or long haul ber transeivers up to 120 Km.
3.26"
[8.28 cm]
4.20"
[10.67 cm]
1.00" [2.54 cm] for 5ES
1.50" [3.81 cm) for 8/9ES
3.72"
[9.45 cm]
3.00"
[7.62 cm]
SL w ith
Lexan Case
SLX w it h
Met al Case
3.79"
[9.63 cm]
4.50"
[11.43 cm]
4.00"
[10.16 cm]