Red Lion SLX-6ES-4, SLX-6ES-5, SL-6ES-4, SL-6ES-5 Data Sheet

SL/SLX-6ES-4/5 Industrial Ethernet Switches

6 PORT INDUSTRIAL ETHERNET UNMANAGED SWITCH

SL/SLX-6ES-4/5

PRODUCT DATASHEET

Sixnet Networking Series

Unmanaged Industrial Ethernet Switches

The SL/SLX-6ES-4/5 is a 6 port industrial Ethernet switch

featuring 2 fast ber optic ports. It provides advanced

performance for real-time deterministic operation and

is ruggedized to provide superior reliability. This switch
requires no user setup and immediately starts operating
as soon as you power it up. Sixnet switches are designed
to make your job easier, ensuring your system will keep
running for many years to come.

PRODUCT HIGHLIGHTS

n

4 fast RJ45 and 2 noise-immune ber ports

n

Truly industrial hardened design

n

Slim case for DIN rail or direct panel mounting

n

High performance and value

SLX-6ES-4/5

Aluminum Case
Wide Temperature

n

Plug and play saves you time and money

REAL-TIME SECURE PERFORMANCE

n

Fast wire-speed switching

n

Intelligent routing - No collisions!

n

Ideal for any system

TROUBLE FREE OPERATION

n

Ultra-reliable 1,000,000 + hours MTBF

n

-40 to +85 °C operating range (SLX model)

n

UL/CSA (CUL), CE and Hazloc (Zone 2) rated

n

Dual power inputs keeps you running

n

Industrial surge and spike protection

n

Self-test/alarm output contact

Sixnet Knows Industrial

We have been designing industrial hardware such as
Remote Terminal Units for over 30+ years and have
used this expertise to design the toughest Ethernet
switches on the market. Don’t trust your critical

communications to so-called industrial hardware from

commercial switch manufacturers. Sixnet switches
give you proven assurance that your system will keep
running for years to come.

SL-6ES-4/5

Lexan Case

Standard Temperature

SL/SLX-6ES-4/5 Industrial Ethernet Switch Specifications

SL/SLX-6ES-4/56 PORT INDUSTRIAL ETHERNET UNMANAGED SWITCH

ETHERNET PERFORMANCE

n

4 fast RJ45 and 2 ber optic ports

n

Unmanaged, store & forward, wire-speed

n

All IEEE 802.3 Ethernet protocols supported

n

RJ45 ports (shielded) 10/100BaseTX

n

RJ45 port speed auto-negotiation

n

RJ45 MDI/MDIX auto-crossover

n

RJ45 TD and RD auto-polarity

n

Fiber on ports 5 and 6

n

Fiber optic port speed: 100 Mbps

n

Fiber typical specs (see separate datasheet for details)

p

Multimode, 4 km, 1310 nm, 50-62.5/125 µm

p

Singlemode, 20 km, 1310 nm, 9-10/125 µm

p

Singlemode, 60 km, 1310 nm, 9-10/125 µm

p

Long haul, up to 120 km, 1550 nm, 9-10/125 µm

n

Typical latency (varies on load & settings)

p

@ 10 Mbps: 16 us + frame time

p

@ 100 Mbps: 5 us + frame time

n

Full duplex operation with ow control

n

MAC addresses supported 1024

n

Memory bandwidth 3.2 Gbps

n

Ethernet isolation 1500 VRMS 1 minute

ETHERNET COMPLIANCE

n

IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)

n

IEEE 802.3 (10Mbps Ethernet supports legacy devices)

n

IEEE 802.3x (Full-Duplex with Flow Control)

POWER INPUT

n

Redundant input terminals

n

Reverse polarity protection

n

Input power (typ. with all ports active)

p

5 W (-4/5 model w/ 2 ber)

n

Power input voltage 10-30 VDC

n

Transient protection 15,000 watts peak

n

Spike protection 5,000 watts (10x for 10 uS)

ENVIRONMENTAL

n

Operating temperature:

p

SLX models: -40 to +85°C (cold startup at -40°C)

p

SL models: -40 to +60°C

n

Storage temperature: -40 to +85°C

n

Humidity (non-condensing) 5 to 95% RH (optional conformal

coating is available)

n

Vibration and shock – IEC60068-2-6, and -27

n

Maximum Operating Altitude: 30,000 ft. (SLX models)

All specications are subject to change. Contact Sixnet to learn more.

ORDERING GUIDE

SLX-6ES-4SC 4 RJ45 ports, 2 multimode SC, 4 km

SLX-6ES-4ST 4 RJ45 ports, 2 multimode ST, 4 km

SLX-6ES-5SC 4 RJ45 ports, 2 singlemode SC, 20 km

SLX-6ES-5ST 4 RJ45 ports, 2 singlemode ST, 20 km

SLX-6ES-5SCL 4 RJ45 ports, 2 singlemode SC, 60 km

SLX-6ES-5STL 4 RJ45 ports, 2 singlemode ST, 60 km

SL- w/ Lexan case and limited temperature

ET-PS-024-02 Power supply – AC to 24VDC, 2A

SP-ETH-2 Dual port Ethernet surge and lightning

protector for the 10/100 ports only

“OK” ALARM OUTPUT

n

Indicates power & operational status

n

Voltage same as switch input voltage

n

Maximum current output 0.5 Amp

PHYSICAL

n

DIN rail or direct panel mounting

n

Case – Aluminum (SLX) or Lexan (SL)

n

Ingress protection:

p

SL models: IP30

p

SLX models: IP40

n

Weight – SLX: 0.23 kg (8 oz.); SL: 0.17 kg (6 oz.)

n

Dimensions – see mechanical diagram

STANDARDS COMPLIANCE

n

Electrical safety – UL508 / CSA C22.2/142; EN61010-1, CE

n

EMC – FCC part 15, ICES-003; EN61000-6-2/4

n

Hazardous locations – ANSI/ ISA 12.12.01 / CSA C22.2/213

(Class I, Div. 2); EN60079-15 (Zone 2, Category 3),
CE (ATEX)

n

Maritime – designed for marine and offshore per ABS

n

RoHS and WEEE compliant

MECHANICAL DRAWING

3.26"

[8.28 cm]

4.20"

[10.67 cm]

1.50"

[3. 81 cm)

3.72"

[9.45 cm]

3.00"

[7. 62 cm]

SL w ith

Lexan Case

SLX w it h

Met al Case

3.79"

[9. 63 cm]

4.50"

[11.43 cm]

4.00"

[10.16 cm]

SLX SL

See t he User M anual for a More D etailed Diagram

NOTE: Contact Sixnet for special or long haul ber transceivers up to 120 km