Red Lion PAX2S Data Sheet

Dual Line Strain Gage Meter

Red Lion PAX®2 Series

PAX2S - Dual Line Strain Gage MeteruMeter

With 9 dual line display and strain gage input, the PAX2S delivers an ideal solution for applications that require two parameters to be visualized at the same time.

The input, gross, tare, total, min, max or setpoints can be displayed on the

0.7" high 6-digit Line 1 of the LCD display. The color change can be tied to the setpoints; providing the operator with a visual display of changing conditions in the application. Line 2 of the display is a 0.35" high 9-digit, green LCD that can be programmed for any of the above parameters as well.

The strain gage input easily connects to load cell, strain gage or pressure sensors. The PAX2S also features a universal power input. Whether it’s 40 to 250 VAC or 21.6 to 250 VDC, polarity does not matter.

PRODUCT HIGHLIGHTS

> Load cells, Strain Gage, and Pressure Sensors

> Universal Power Supply: 40 to 250 VAC or 21.6

to 250 VDC

> Built-in USB Port

> Meter Update Rate up to 160/Second

> Built-in Modbus Communications

> Setpoints: Dual and Quad Relay; Quad Sinking;

Quad Sourcing/SSR Drive; and Dual Triac/Dual SSR Drive

> Retransmitted Analog Output

> Communications: RS232, RS485, DeviceNet,

and Proﬁbus

1. Top Line: 6-Digit 0.7" (18 mm) Display

2. Programmable for Red, Orange or Green

3. Custom Unit Indicator

4. Tactile Feel Buttons

5. Setpoint Annunciators

6. Bottom Line: 9-Digit 0.35" (9 mm) Green Display

7. Built-In USB Port

FEATURES & BENEFITS

> Line 1 of the display offers three programmable

easy-to-read colors: red, orange and green

> The display color can be tied to the setpoints

> The 9-digit display accommodates totalizing

applications that easily exceed the normal 6-digit displays

> Offers a 3-digit programmable mnemonic; add

identiﬁcation to the display value

> Stock one meter for multiple applications

PAX2S - Dual Line Strain Gage Meter Specifications

(2.54)

(44.45)

3.60 (91.44)

4.14 (105)

0.10

1.75

3.60 (91.44)

DISPLAY

Positive image LCD Top Line: 6-digit, 0.71" (18 mm) tri-color backlight

(red, green or orange) Display range: -199,999 to 999,999

Bottom Line: 9 digit, 0.35" (8.9 mm) green backlight

Display range: -199,999,999 to 999,999,999

POWER

AC Power: 40 to 250 VAC, 50/60 Hz, 20 VA DC Power: 21.6 to 250 VDC, 8 W

ANNUNCIATORS

Backlight color: Red

1 - setpoint alarm 1 is active 2 - setpoint alarm 2 is active 3 - setpoint alarm 3 is active 4 - setpoint alarm 4 is active

Units Label: programmable 3 digit units annunciator

with tri-color backlight (red, green or orange)

KEYPAD

2 programmable function keys, 4 keys total

A/D CONVERTER

24 bit resolution

UPDATE RATES

A/D conversion rate: programmable 5 to 160 readings/sec.

INPUT CAPABILITIES

Connection Type: 4-wire bridge (differential) or

2-wire bridge (single-ended)

Range: Selectable for ± 24 mVDC or ± 240 mVDC

EXCITATION POWER

Jumper selectable

+5VDC @ 65mADC, +/- 2% +10VDC @ 125mADC, +/- 2%

TOTALIZER

Time Base: second, minute, hour or day Batch: Can accumulate (gate) input display from a user input Time Accuracy: 0.01% typical Decimal Point: 0 to 0.0000 Scale Factor: 0.001 to 65.000 Low Signal Cut-out: -199,999 to 999,999 Total: 6 digits on Line 1; 9 digits on Line 2

CUSTOM LINEARIZATION

Data Point Pairs: Selectable from 2 to 16 Display Range: -199,999 to 999,999 Decimal Point: 0 to 0.0000

MEMORY

Nonvolatile memory retains all programmable

parameters and display values

INPUTS

Three programmable user inputs

ENVIRONMENTAL

Operating Temperature Range: 0 to 50 °C

Storage Temperature Range: -40 to 60 °C

Operating and Storage Humidity: 0 to 85% max.

RH non-condensing

Altitude: Up to 2000 meters

CERTIFICATION & COMPLIANCE

Refer to EMC Installation Guidelines section of the bulletin for

additional information

CONNECTIONS

High compression cage-clamp terminal block

MECHANICAL

Construction: This unit is rated for NEMA 4X/IP65 indoor use;

IP20 Touch safe; Installation Category II, Pollution Degree 2; One piece bezel/case; Flame resistant; Synthetic rubber keypad; Panel gasket and mounting clip included

Weight: 8 oz. (226.8 g)

DIMENSIONS In inches (mm)

1.95

(49.53)

3.80 (96.52)

1.75

(44.45)

0.10

(2.54)

4.14 (105)

ORDERING INFORMATION

PART NUMBER MODEL DESCRIPTION

PAX2S000 PAX2S Dual Line Display Strain Gage Meter

PAXCDS10

PAXCDS20 Quad Setpoint Relay Output Card

PAXCDS30 Quad Setpoint Sinking Open Collector Output Card

PAXCDS40 Quad Setpoint Sourcing Open Collector Output Card

PAXCDS50 Dual Triac/Dual SSR Drive Digital Output Card

PAXCDS60 Quad Form C Relay Digital Output Card

PAXCDC10

PAXCDC1C

PAXCDC20 RS232 Serial Communications Card with Terminal Block

PAXCDC2C

PAXCDC30 DeviceNet Communications Card

PAXCDC50 Profibus-DP Communications Card

PAXCDL10 PAXCDL Analog Output Card

PAXCDS

PAXCDC

Dual Setpoint Relay Output Card

RS485 Serial Communications Card with Terminal Block

Extended RS485 Serial Communications Card with Dual RJ11 Connector

Extended RS232 Serial Communications Card with 9 Pin D Connector

Connect. Monitor. Control.