Red Lion PAX2C Data Sheet

FlexCard™: Universal PAX®2 Modules
Red Lion Automation Series
Field-Installable FlexCard Modules
Red Lion’s FlexCard modules quickly expand the functionality of PAX2C PID controllers to meet application requirements.
Red Lion’s PAX2C PID controllers offer the capability to add and change FieldCard modules and PAX option cards as your application and communications requirements change. Red Lion’s field-upgradeable solutions are the perfect alternative to competitive meters that require a new meter every time conditions change.
APPLICATIONS
> Factory Automation
> Flow and Temperature
> Manufacturing
> Process Control
FEATURES & BENEFITS
> Field-Installable FlexCard Modules
• Allows PAX2C PID controllers to quickly meet any PID control application requirement
• Reduces inventory requirements and expands available PID control monitoring
> Plug-and-Play Installation
• FlexCard modules can be installed in any available card slot
PRODUCT HIGHLIGHTS
> Field-Installable FlexCard Modules Provide:
• Optional Heater Current Monitor
• Optional Secondary Process Input
• Optional Full PID Controller
> Plug-and-Play Installation
> Crimson® Software Programmable
> Variety of FlexCard Module Options
• Heater current module provides warning and alarm before heater elements fail
• Integrate multi-zone PID control into a single PAX2C display reducing space and complexity
• Remote setpoint module offers secondary process inputs or remote setpoint input
> Easily Programmed
• Easily configured using Crimson software or keypad on face of meter
• Simple and intuitive programming
Field-Installable FlexCard Modules
Alignment
POWER
Power for the card is provided via PAX2C controller
OUTPUT SPECIFICATIONS (APPLIES TO ALL MODULES)
Four Solid-State NFET Outputs
Type: Switched DC, N channel open drain MOSFET Current Rating: 1 ADC max VDS On: < 0.2 V @ 1A VDS Max: 30 VDC Offstate Leakage Current: 0.5 μA max
OUTPUT POWER SUPPLY
+Volt: 18 to 25 VDC @ 40 mA max
CONNECTIONS
Rear Terminals: Fixed
Type: High compression cage-clamp terminal block Wire Strip Length: 0.31” (8 mm) Wire Gauge Capacity: 26 to 16 AWG (0.14 to 1.5 mm2) Torque: 4.4-5.3 inch-lbs (0.5-0.6 N-m)
Top Terminals: Removable
Type: Spring - cage terminal block Wire Strip Length: 0.27” (7.0 mm) Wire Gauge Capacity: 24 to 16 AWG (0.2 to 1.5 mm2)
CERTIFICATIONS AND COMPLIANCES
Complies with all certifications and compliances of the host
PAX2C controller
PX2FCA00 PROCESS INPUT/PID CONTROLLER FLEXCARD: SPECIFICATIONS
Input Ranges: 0 to 10 VDC, 0 to 20 mA DC A/D Conversion: 16 bit, 6.8 samples/sec Input Specifications:
Input Range Accuracy @
0-50°C
10 V 20 mA 0.1% of span 538 KΩ 10 Ω 30 V 150 mA
Input Impedance Max Input Signal
PX2FCA10 HEATER CURRENT MONITOR FLEXCARD: SPECIFICATIONS
A/D Conversion: 16 bit, 6.8 samples/sec Input Specifications:
Type: Single phase, full wave monitoring of load currents Input: 100 mA AC output from current transformer Input Resistance: 5 Ω Accuracy: ±2.0% full scale, 5 to 100% of range Frequency: 50 to 400 Hz Overload: 200 mA (continuous) Output on time delay for break alarm: 1 second)
INSTALLATION DIAGRAM
Slots
Main Circuit Board
Standard Card Connectors
Finger
Tab
Slot #
123
ORDERING GUIDE
PART NUMBER DESCRIPTION
PX2FCA00 Process Input/PID Controller FlexCard
PX2FCA10 Heater Current Monitor FlexCard
FlexBus Connectors
Finger Tab
Connect. Monitor. Control.
Loading...