Red Lion NT24K-8TX-POE Data Sheet

NT24k®-8TX-POE Industrial PoE+ Switch

N-Tron® Networking Series

Industrial Managed Gigabit PoE+ Ethernet Switch

Red Lion’s N-Tron® series NT24k®-8TX-POE compact managed
Gigabit Ethernet switch features eight 10/100/1000Base-T(X)
ports with PoE+ providing a robust solution for transmitting
power and data to equipment in harsh environments.

The NT24k-8TX-POE managed switch features 8 ports (eight Gigabit IEEE 802.3af/at Power over
Ethernet Plus (PoE+) ports) and is housed in a compact, hardened metal DIN-rail enclosure with
redundant 22-49 VDC power inputs. Designed to handle the most demanding environments, the
NT24k-8TX-POE provides up to 30 Watts of power per port, high shock and vibration ratings and a
wide -40° to 80°C operating temperature range.

APPLICATIONS

> Alternative Energy

> Manufacturing

> Oil & Gas

> Transportation

> Water/Wastewater

FEATURES & BENEFITS

> 8 Copper Ports

• Eight 10/100/1000Base-T(X) copper ports,
supporting PoE+ on each port

> Redundant 22 to 49 VDC Power Inputs

• Boosts power to meet PoE+ output requirements

> IEEE 802.3af/at PoE Output

• Supports PoE+ output on all copper ports simultaneously

> Extended Environmental Specifications

• -40° to 80°C operating temperature range

• > 2M hours MTBF

• UL/cUL: Class I, Div. 2 Groups A, B, C and D

> Plug-and-Play Operation:

• IGMP auto-configuration

• MDIX auto-sensing cable

• Simple network ring configuration

• Backup and restore via recovery card or XML

PRODUCT HIGHLIGHTS

> IEEE 802.3af/at PoE+ Output

> Smart Plug-and-Play Operation

> 22 to 49 VDC Redundant Power Inputs

> -40° to 80°C Wide Operating Temperature

> Robust Remote Monitoring

> N-Ring™ & N-Link™ Network Ring Technology

> Fully Managed Features Include:

• Jumbo frame support

• SNMP v1, v2, v3

• Web browser management

• Detailed ring map and fault location charting

• RSTP - 802.1d, 802.1w, 802.1D

• Trunking and port mirroring

• 802.1Q tag VLAN and port VLAN

• IEEE 802.1x with RADIUS remote server authentication

• 802.1p QoS, port QoS and DSCP

• DHCP client

• Event Log

• SNTP (Simple Network Time Protocol)

• Multi-Member N-Ring technology with ~30ms healing

• N-Link redundant ring technology

• N-View™ monitoring technology

• EtherNet/IP™ CIP™ messaging

compliant

NT24k-8TX-POE Specifications

SWITCH PROPERTIES

Operation: Managed
Number of MAC Addresses: 16,000
IEEE Compliant: 802.3, 802.3u, 802.3ab, 802.3x, 802.3af/at,

802.1d/D/w, 802.1p, 802.1Q, 802.1x
Latency (Typical):1.6 μs
Switching Method: Store-and-Forward
Supports 30 Watts per Port (25.5 Watts at the PD)
LED Status Indicators
Configurable Alarm Contact
Onboard Temperature Sensor
Supports Full/Half Duplex Operation
Maximum Throughput: Up to 16 Gb/s
MDIX Auto Sensing Cable
Auto Sensing Speed and Flow Control
Communications: Full Wire Speed
MTBF: >2 million hours

POWER INPUT

Input Voltage: 22-49 VDC
Steady Input Current: 10.94 A @ 24 VDC
Inrush: 68.0 A / .09 ms @ 24 VDC
BTU/HR: 122

POWER OVER ETHERNET

PoE Standard: IEEE 802.3af/at Gigabit PSE
PoE Output Power: 57 VDC / 30 Watts Output (25.5 W at PD)
Power Pin Assignment: Pins 1/2 (-), Pins 3/6 (+)
PSE Type: Type 2

CONNECTORS

10/100/1000BaseT: Eight (8) RJ-45 ports
ESD and surge protection diodes on all copper ports
Configuration Port: One (1) USB Type B

NETWORK MEDIA

10BaseT: ≥ Cat3 cable
100BaseTX: ≥ Cat5 cable
1000BaseT: ≥ Cat5e cable

RECOMMENDED WIRING CLEARANCE

Front: 2” (5.08 cm)
Top: 4” (10.16 cm)

ENVIRONMENTAL

Operating Temperature: -40°C to 80°C
Storage Temperature: -40°C to 85°C
Operating Humidity: 10% to 95% (non condensing)
Operating Altitude: 0 to 10,000 ft.
Shock: 200 g @ 10 ms (bulkhead mounted)
Vibration: 50 g @ 5-200 Hz, Triaxial (bulkhead mounted)

CERTIFICATION & COMPLIANCE

Product Safety:

ANSI/ISA 12.12.01-2013 Class I and II, Div. 2 and Class III, Div. 1 and

2, Groups A, B, C and D Hazardous Locations
UL508 Industrial Control Equipment
CAN/CSA-C22.2 No. 213-M1987 Class I Div. 2 Hazardous Locations
CAN/CSA-C22.2 No. 14-M1987 Industrial Control Equipment
Emissions:

FCC Title 47, Part 15, Radio Frequency Devices, Subpart B ANSI

C63.4-2009; Industry Canada ICES-003, EN 55011; EN 61000-6-4,

EN 61000-3-2, EN61000-3-3, EN 55032
Immunity:

EN 55024, EN 61000-6-2; IEC 61000-4-2 (ESD); IEC 61000-4-3

(RFAM); IEC 61000-4-4 (EFT); IEC 61000-4-5 (SURGE); IEC 61000-4-6

(RFCM); IEC 61000-4-8 (PFMF); IEC 61000-4-11 (VDI)
Rail:

EN 50155, EN 50121 and EN 61373
Designed to Comply with:

IEEE 1613 (Electric Utility Substations), NEMA TS1/TS2 (Traffic Control)
Other:

ABS Type Approval for Shipboard Applications; EMC Directive

2014/30/EU; LV Directive 2014/35/EU GOST-R, RoHS Compliant

MECHANICAL

Case Dimensions:

Height: 5.88” (14.92 cm)

Width: 4.28” (10.88 cm)

Depth: 5.54” (14.07 cm)
Weight: 3.13 lbs (1.42 kg)
Mount: DIN Rail 35 mm

WARRANTY

3 Years on Design and Manufacturing Defects

ORDERING GUIDE

PART NUMBER DESCRIPTION

NT24K-8TX-POE Eight Port 10/100/1000BaseT Managed PoE+ Industrial Ethernet Switch

NTCD-CFG NT24k Configuration Recovery Device

NTPS-24-20 DIN-Rail Power Supply 20 Amp @ 24 VDC

NTPS-48-10 DIN-Rail Power Supply 10 Amp @ 48 VDC

NT24K-NM-PMK NT24k Non-Modular Panel Mount Kit