red lion DRRJ11T6, DRRJ45T8, DRRJ45P6, CBJ11BD5, CBLRLC02 User Manual

1

RJ-11 DIMENSIONS In inches (mm)

RJ ADAPTERS & CABLES

Bulletin No. DRRJ-C
Drawing No. LP0554
Released 7/03

Tel [phone]
Fax [phone]
www.redlion-controls.com

DRRJ11T6 and DRRJ45T8 Connector to Terminal Adapters

MODEL DESCRIPTION PART NUMBER

CBJ

CBL

DRRJ

RJ-12 to RJ-12 10' Cable

RJ-45 to RJ-45 6" Jumper Cable

RJ-45 to RJ-45 10' Cable

RJ-45 Connector to Terminal Adapter

RJ-12 to RJ-12 1' Cable

RJ-45 Parallel Connector
RJ-11 to RJ-11 6" Jumper Cable

RJ-45 to RJ-45 1' Cable

RJ-11/12 Connector to Terminal Adapter

CBLRLC02

CBLRLC07

CBLRLC04

DRRJ45T8

CBLRLC01

DRRJ45P6
CBJ11BD5

CBLRLC03

DRRJ11T6

ORDERING INFORMATION

APPLICATION EXAMPLES

RS485 via RJ-11 connector and DRRJ11T6

Product Examples: DLC, IAMS, ITMS, and PAX.

A Red Lion Controls device with an RS485 RJ-11 port is connected to the
DRRJ11T6 adapter using the CBJ11BD5 cable. The terminal block is then
wired to run the RS485 MODBUS serial information to another device.

A Red Lion Controls device with an RS232 RJ-12 port is connected to the
DRRJ11T6 adapter using the CBLRLC01 or CBLRLC02 cable. The terminal
block is then wired to run the RS232 serial information to another device.

RS232 via RJ-12 connector and DRRJ11T6

Product Examples: G3, Modular Controller, and Paradigm (CL,
CX, GL, TX, and VX)

DESCRIPTION

These adapters convert modular RJ-style connectors to terminal
block connectors, providing a rugged means by which standard
shielded cabling can be used in lieu of flat, unshielded cable. The
DRRJ11T6 can be used with RJ-11 or RJ-12 cables, while the
DRRJ45T8 can be used with RJ-45 connectors. The adapters are
designed to mount on any standard DIN rail.

Each screw-terminal accepts wire in size from 26 to 14 AWG (0.14
to 2.5 mm solid; 0.14 to 1.5 mm stranded). Terminal numbers for the
screw-terminals correspond directly to the terminal pin out of the RJ
connector. There is an extra terminal on each block labeled “S” for the
connection of shields.

LIMITED WARRANTY

The Company warrants the products it manufactures against defects in materials and workmanship for a period limited to one year from the
date of shipment, provided the products have been stored, handled, installed, and used under proper conditions. The Company’s liability
under this limited warranty shall extend only to the repair or replacement of a defective product, at The Company’s option. The Company
disclaims all liability for any affirmation, promise or representation with respect to the products.

The customer agrees to hold Red Lion Controls harmless from, defend, and indemnify RLC against damages, claims, and expenses arising
out of subsequent sales of RLC products or products containing components manufactured by RLC and based upon personal injuries, deaths,
property damage, lost profits, and other matters which Buyer, its employees, or sub-contractors are or may be to any extent liable, including
without limitation penalties imposed by the Consumer Product Safety Act (P.L. 92-573) and liability imposed upon any person pursuant to
the Magnuson-Moss Warranty Act (P.L. 93-637), as now in effect or as amended hereafter.

No warranties expressed or implied are created with respect to The Company’s products except those expressly contained herein. The
Customer acknowledges the disclaimers and limitations contained herein and relies on no other warranties or affirmations.

G3 operator panel connected to two Modular Controller masters.

APPLICATION EXAMPLE

The 10' long CBLRLC04 connects the G3, which
is mounted on the door of the enclosure, to the
DRRJ45P6, which is located on the DIN rail next to
the Modular Controllers. The 1' long CBLRLC03
cables are used to jumper from the DRRJ45P6 to the
Modular Controllers.

DRRJ45P6 - RJ45 Parallel Connector

DIMENSIONS In inches (mm)

RS422/RS485/DH485 via RJ-45 connector and DRRJ45T8

Product Examples: G3 and Modular Controller

A Red Lion Controls device with an RS422/RS485/DH485 port via RJ-45 is
connected to the DRRJ45T8 adapter using the CBLRLC03 or CBLRLC04
cable. The terminal block is then wired to run the RS422/RS485/DH485 serial
information to another device.

RJ-45 DIMENSIONS In inches (mm)

APPLICATION EXAMPLES

DESCRIPTION

The DRRJ45P6 allows Red Lion products that utilize an RJ45-RS485
port to be quickly multi-dropped, saving wiring time. All six of the
connectors on the DRRJ45P6 are wired in parallel, allowing products
such as the G3 operator panel and the Modular Controller to be easily
connected for multi-drop applications.