
716TX-HV Industrial Ethernet Switch
THE INDUSTRIAL NETWORK COMPANY
N-Tron Networking Series
Managed Industrial Ethernet Switch
The N-TRON®716TX-HV Industrial Ethernet Switch offers
outstanding performance and ease of use. It is a fully managed
switch, ideally suited for connecting Ethernet enabled devices in
railway, industrial and security applications.
PRODUCT FEATURES
• Sixteen 10/100BaseTX RJ-45 Ports
• -40
• ESD and Surge Protection Diodes on all Ports
• Auto Sensing 10/100BaseTX, Duplex, and MDIX
• Store-and-forward Technology
• Rugged DIN-Rail Enclosure
• Redundant Power Inputs (40-160VDC)
• Confi gurable Alarm Contact & Bi-Color Fault Status LED
Fully Managed Features:
• SNMP v1, v2, v3 and Web Browser Management
• Detailed Ring Map and Fault Location Charting
• N-Ring
• N-View
• N-Link
• Plug-and-play IGMP Support
• 802.1Q tag VLAN and Port VLAN
• 802.1p QoS and Port QoS
• EtherNet/IP™ CIP Messaging
• LLDP (Link Layer Discovery Protocol)
• Port Trunking
• Port Mirroring
• 802.1d, 802.1w, 802.1D RSTP
• DHCP Server, Option 82 relay, Option 61, IP Fallback
• Port Security—MAC Address Based
Management Features
The 716TX-HV offers several management functions that can be
easily confi gured using a web browser.
IGMP Snooping - Internet Group Management Protocol is a feature
that allows the 716TX-HV switch to forward and fi lter multicast
traffi c intelligently.
VLAN - Virtual Local Area Network allows you to segment the switch
in order to create two or more separate local area network domains.
QoS - Quality of Service provides prioritization of network traffi c
in order to provide better network service. The primary goal of QoS
is to improve the latency of prioritized Ethernet packets required
for ring management, real-time, and other interactive applications.
Port Trunking - Trunking (link aggregation) enables multiple
physical ports to be linked together and function as one uplink to
another N-TRON trunking capable switch confi gured in the same
manner, thereby increasing the bandwidth between switches. This
confi guration can provide increased bandwidth and redundancy to
applications requiring high levels of fault tolerant operation.
Port Mirroring - This function allows the traffi c on one port to
be duplicated and sent to a designated mirror port. Port mirroring
can be used to monitor Ethernet traffi c on the designated source
port using the assigned mirror port.
DHCP-DHCP Server / Client automates the assignment of IP
addresses. DHCP Option 82 assures that if a device on a specifi c
port is replaced, the replacement receives the same IP address as
the original device.
o
C to 70oC Operating temperature
™
Technology with ~30ms Healing
™
OPC Monitoring
™
Redundant N-Ring Coupling
Rapid Spanning Tree Protocol
RSTP allows the switch to be confi gured in a ring or mesh topology,
and provides support for redundant path communications with high
speed (rapid) healing.
Remote Monitoring Options
For ease of confi guration and monitoring, the 716TX-HV offers web
browser management and N-View OLE for process control (OPC)
server software. The N-TRON N-View software can be combined with
popular HMI software packages to add network traffi c monitoring,
trending, and alarming to any application using N-TRON switches.
In addition, SNMP is available for switch link and status monitoring.
The alarm contact and status LED can be confi gured to respond to
power failure on power input 1 or input 2, N-Ring broken, partial
break high, partial break low, or if multiple ring managers are detected.
N-Ring Technology
N-TRON's 716TX-HV ring manager using N-TRON
technology offers expanded ring size capacity, detailed fault
diagnostics, and a standard healing time of ~30ms. The 716TX-HV
ring manager periodically checks the health of the ring via packets. If
the ring manager stops receiving these health check packets, it converts
the ring to a linear topology within ~30ms.
ring are
fault location chart will also be provided on the ring manager’s web
browser and OPC server to identfy the health status of the ring.
N-Link
N-TRON switches can participate in N-Ring topologies.
Industrial Packaging and Specifi cations
The 716TX-HV is designed to operate in industrial environments. It is
housed in a rugged steel DIN-Rail enclosure. It has extended industrial
specifi cations and features to meet or exceed the operating parameters
of connected equipment. These include extended temperature ratings,
extended shock and vibration specs, redundant power inputs, and high
MTBF (greater than 2M hours).
Ease of Use
The 10/100BaseTX ports are auto sensing and auto confi guring.
Each copper port is automatically negotiated for maximum speed and
performance by default, but can also be hard coded through the user
interface. A high speed processor allows wire speed capability on all
100BaseTX ports simultaneously.
's N-Ring
When all switches in the
N-TRON fully managed switches, a detailed ring map and
™
allows the linking of two N-Rings. Up to 250 fully managed

716TX-HV Specifications
THE INDUSTRIAL NETWORK COMPANY
716TX-HV Specifi cations
Switch Properties
Number of MAC Addresses: 8000
Aging Time: Programmable
Latency Typical: 2.6 μs
Switching Method: Store-and-Forward
Case Dimensions
Height: 2.3" (5.8 cm)
Width: 8.3" (21.0 cm)
Depth: 4.8" (12.1 cm)
Weight (max): 3.3 lbs (1.5 kg)
DIN-Rail Mount: 35mm
Electrical
Redundant Input Voltage: 40-160 VDC (Regulated)
Input Current (max): 160mA max. @ 124VDC
BTU/hr: 67.7@124VDC
Environmental
Operating Temperature: -40oC to 70oC
o
Storage Temperature: -40
Operating Humidity: 5% to 95%
(Non Condensing)
Operating Altitude: 0 to 10,000 ft.
C to 85oC
Network Media
10BaseT: >Cat3 Cable
100BaseTX: >Cat5 Cable
Connectors
10/100BaseTX: Sixteen (16) RJ-45 Copper Ports
Recommended Wiring Clearance
Front: 4" (10.16 cm)
Side: 1" (2.54 cm)
Shock and Vibration (bulkhead mounted)
Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial
Reliability
MTBF: >2 Million Hours
Regulatory Approvals
FCC/CE CFR 47 Part 15, Subpart B, Class A
EN55022, ICES-003
EN 61000-4-3/4/5/6
EN50155 for Railway Applications
GS/CE: EN60950-1