Red Lion 709FX Data Sheet

709FX Industrial Ethernet Switch

THE INDUSTRIAL NETWORK COMPANY

709FX

N-Tron Networking Series

Managed Industrial Ethernet Switch

The N-TRON
in a rugged industrial metal enclosure and offers a powerful combination of eight
10/100BaseTX copper ports and one 100Base  ber port. It is ideally suited for
use in industrial applications such as factory  oor control networks, utilities, wind
turbines, wastewater treatment facilities, rail car, intelligent traf c control and
transportation applications, and any other application where high reliability, superior
noise immunity, extreme ruggedness, and extended distance are required.

PRODUCT FEATURES

• Eight 10/100BaseTX RJ-45 Ports

• One 100BaseFX Port, ST or SC Style

• -40

• Onboard Temperature Sensor

• ESD and Surge Protection Diodes on all Ports

• Auto Sensing 10/100BaseTX, Duplex, and MDIX

• Store-and-Forward Technology

• Rugged DIN-Rail Enclosure

• Redundant Power Inputs (10-49 VDC)

• Con gurable Bi-Color Fault Status LED

FULLY MANAGED FEATURES

• SNMP v1, v2, v3 and Web Browser Management

• Con guration backup via Optional SD card

• Detailed Ring Map and Fault Location Charting

• N-Ring

• N-Link

• RSTP 802.1d, 802.1w, 802.1D

• N-View

• IGMP Auto con guration

• 802.1Q tag VLAN and Port VLAN

• 802.1p QoS, Port QoS, and DSCP

• EtherNet/IP

• LLDP (Link Layer Discovery Protocol)

• Trunking

• Port Mirroring

• DHCP Server, Option 82 relay, Option 61, IP Fallback

• Local Port IP Addressing

• Port Security—MAC Address Based

®

709FX compact, fully managed industrial Ethernet switch is housed

o

C to 70oC Operating Temperature

™

Technology with ~30ms Healing

™

Redundant N-Ring Coupling

™

OPC Monitoring

™

CIP Messaging

Remote Monitoring Options

Web browser and N-View OPC (OLE for process control) server software provides
con guration and monitoring capability. N-View software easily combines with HMI
software to monitor network traf c, alarms, and trends. SNMP is also available for
switch link and status monitoring. Status LEDs are con gurable to indicate power
failure and N-Ring status.

N-Ring Technology

N-Ring technology provides expanded ring capacity, detailed fault diagnostics,
and fast 30ms healing time. The ring manager validates the integrity of the ring
using health check packets and quickly converts the ring to a linear topology
within ~30ms when an error is detected. The health status of a ring comprised of
all N-TRON fully managed switches may be monitored. A detailed ring map and
fault location chart may be accessed by the ring manager's web browser or the
OPC server. N-Link allows the linking of two N-Rings. Up to 250 fully managed
N-TRON switches are supported in an N-Ring topology.

Industrial Speci cations

High MTBF, extended shock and vibration specifications, wide operating
temperature range and redundant power inputs are standard features.

Ease of Use

The 10/100BaseTX ports are auto sensing and auto con guring. Each copper port
is automatically negotiated for maximum speed and performance by default, but
can also be hard coded through the user interface. A high-speed processor allows
wire speed capability on all 10/100BaseTX ports simultaneously.

709FX Specifications

709FX

Speci cations

Switch Properties

Number of MAC Addresses: 8000
Aging Time: Programmable
Latency Typical: 2.6 μs
Switching Method: Store-and-Forward

Case Dimensions

Height: 4.3" (10.8 cm)
Width: 2.4" (6.1 cm)
Depth: 4.6" (11.5 cm)
Weight (max): 1.4 lbs (0.6 kg)
DIN-Rail Mount: 35mm

Electrical

Redundant Input Voltage: 10-49 VDC (Regulated)
Input Current (max): 365mA@24 VDC
BTU/hr: 29.89@24 VDC
N-TRON Power Supply: NTPS-24-1.3 (1.3A@24V)

Environmental

Operating Temperature: -40oC to 70oC
Storage Temperature: -40

o

C to 85oC
Operating Humidity: 5% to 95% (Non Condensing)
Operating Altitude: 0 to 10,000 ft.

Shock and Vibration (bulkhead mounted)

Shock: 200g @ 10ms
Vibration/Seismic: 50g, 5-200Hz, Triaxial

Reliability

MTBF: >2 Million Hours

Network Media

10BaseT: ≥Cat3 Cable
100BaseTX: ≥Cat5 Cable

Connectors

10/100BaseTX: Eight (8) RJ-45 Copper Ports
100BaseFX: One (1) 100BaseFX Port, ST or SC Style

Recommended Wiring Clearance

Front: 4" (10.2 cm)
Side: 1" (2.6 cm)

Regulatory Approvals

FCC: Title 47, Part 15, Subpart B, Class A; ICES-003: Class A;
ANSI C63.4
CE: EN 61000-6-2, 4; IEC 61000-4-2, 3, 4, 5, 6, 8, 11
GOST-R Certi ed, RoHS Compliant
UL/cUL: UL 508 and ANSI/ISA-12.12.01-2007
Class I, Div 2, Groups A, B, C, and D; T4
Designed to comply with:
IEEE 1613 for Electric Utility Substations
NEMA TS1/ TS2 for Traf c control
IEC-61850

Fiber Transceiver Characteristics

Fiber Length 2km* 15km** 40km** 80km**

TX Power Min -19dBm -15dBm -5dBm -5dBm

RX Sensitivity Max -31dBm -31dBm -34dBm -34dBm

Wavelength 1310nm 1310nm 1310nm 1550nm

* Multimode Fiber Optic Cable

** Singlemode Fiber Optic Cable