Realtek Semiconductor RTL8723BE Installation manual

Realtek Semiconductor Corp.

No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: [phone]. Fax: [phone]
www.realtek.com.tw

RTL8723BE Combo module

Installation

Rev. 1.0

28 Jan 2013

1 Rev.1.0

Installing the Wireless PCIe miniCard module
Hardware

Step 1. Shut down the computer.
Step 2. Installing PCIe MiniCard module to PCIe MiniCard connector.

Step 3. Connect two external Wi-Fi antennas on I-PEX connectors.

step4. Power on the computer.

Un-installing the Wireless PCIe MiniCard module
Hardware

Step 1. Shut down the computer.
Step 2. Remove 2 external Wi-Fi Antennas from the Wireless PCIe MiniCard module board.

2 Rev.1.0

Step 3. Remove the Wireless PCIe MiniCard module board from PCIe MiniCard connector port.

Step 4. Power on the computer.

Installing the Wireless PCIe miniCard module
Software

Before you proceed with the installation, please notice following descriptions.

Note1: The following installation was operated under Windows XP.
(Procedures are similar for Windows 98SE/Me/2000.)
Note2: If you have installed the WLAN driver & utility before, please
uninstall the old version first.
If you install the “Realtek11n Single Chip PCIE WLAN NIC Mass production kit” into your laptop computer
before installing the software program from

3 Rev.1.0

the CD.

A. Insert the Installation CD to your CD-ROM Drive. Execute the “setup”
program.

B. Click “Next” to process the installation

C. The system starts to install the software of the WLAN adapter.

D. The system will automatically detect the card and display “Hardware

4 Rev.1.0