RDL DS-RC4M, D-RC4M, DB-RC4M User Manual

ACCESSORIES

Models D-RC4M, DS-RC4M, DB-RC4M

4- Channel Remote Control

i i i

 Remote Selection of 4 Audio Sources
 Single-Button Selection for Each Source
 LED Indication
 Single or Multiple Control Locations
 Up To Ten Remote Control Locations

The D SERIES-RC4RM is part of the group of versatile wall-mounted products from Radio Design Labs. The standard mounting case can be directly fastened in
North American electrical boxes or in RDL International wall boxes.

DB-RC4M

DS-RC4M

D-RC4M

 Remote Wiring Using Six Conductors or UTP (CAT5, CAT6)
 Display Is Bright During Adjustment
 Display Dims After Adjustment
 Companion to other RDL Remote Controls
 Available in Stainless, Black or White

APPLICATION: The D SERIES-RC4M is a remote control that provides source selection at single or multiple locations.

The -RC4M is designed to directly connect to an RDL 4-channel switching module controlled by external momentary
pushbuttons. The front panel of the -RC4M features four pushbuttons, each corresponding to one of four inputs. An LED
adjacent to each button shows which source is selected. When an -RC4M is not being used, its display switches to a dim
intensity to avoid being a visual distraction. The display returns to a bright intensity when a button is pushed.

In a typical installation, the -RC4M is wired to an RDL selector module, such as an RU-ASX4D or RU-ASX4DR. As many
as nine additional -RC4M controls may be wired in parallel using UTP cable (CAT5, CAT6 or equivalent). The -RC4M
operates from the same power supply as the selector.

The -RC4M remote controls are constructed on a steel frame. The electronics are fully protected within the rear enclosure.
Connections are made through a rear panel detachable terminal block.

All the D SERIES-RC4M features combine to make it the ideal choice for single point or multiple location remote source
selection in high quality systems. Use them with RDL source selection modules, or side-by-side with other RDL remote
accessories as part of a complete audio/video system.

RDL  659 6th St.  Prescott, AZ., USA 86301  [phone]  FAX [phone]  www.rdlnet.com

ACCESSORIES

Models D-RC4M, DS-RC4M, DB-RC4M

4-Channel Remote Control

Mounting
The D–SERIES RC4RM should be mounted in an RDL WB-1U wall box or equivalent. The ambient operating environment must not exceed 55 degrees C.

Installation/Operation

EN55103-1 E1-E5; EN55103-2 E1-E4; EN60065

Typical Performance reflects product at publication tim e exclusive of EMC
data, if any, supplied with product. Specifications are subject to change
without notice. This product is Professional Apparatus.

TYPICAL PERFORMANCE

Selectors (4): Momentary pushbuttons (1 for each channel)
Indicators (4): Green LEDs, (indicates channel selected)
Connections: Detachable terminal block; Interfaces directly with RDL RU-ASX4D and RU-ASX4DR
Ambient Operating Environment: 0° C to 55° C
Power Requirement: GROUND-REFERENCED, 24 Vdc @ 30 mA
Mounting: Mounts in standard US electrical box, RDL WB- or SMB- series boxes
Dimensions: Height: 4.11 in. 10.44 cm; Width: 1.31 in. 3.33 cm; Depth: 0.98 in. 2.49 cm

891-5615

Radio Design Labs Technical Support Centers

U.S.A. [phone], [phone]; Fax: [phone]

Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287