RDL DS-PSP1AF, DG-PSP1AF, DB-PSP1AF Datasheet

ACCESSORIES
Models D-PSP1AF, DB-PSP1AF, DG-PSP1AF, DS-PSP1AF
Decora-Style Active Loudspeaker - Format-A
DG-PSP1AF DB-PSP1AF DS-PSP1AF D-PSP1AF
Shown with Matching RDL Cover Plates - Available Separately
Exceptional Audio Quality for Ultra-Compact Size 2 Watt RMS Audio Amplifier Compressor/Limiter Prevents Clipping Connects to Format-A Sender using Twisted-Pair Cable Powered from RDL Twisted Pair Format-A Sender
The D SERIES-PSP1AF is part of the group of versatile wall-mounted products from Radio Design Labs. The standard mounting case can be directly fastened in North American electrical boxes or in RDL International wall boxes.
APPLICATION: The D SERIES-PSP1AF is a compact active loudspeaker that delivers rich, detailed sound in Decora-compatible wall or chassis mounts.
It is a single-pair audio amplifier module compatible with RDL Format A twisted pair products. The -PSP1AF receives audio and 24 Vdc power through a rear-panel RJ45 jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is amplified. Amplification is provided by a high-efficiency Class D power stage with audio filtering tailored for crisp, pleasant audio clarity. The high-efficiency Class D output stage produces negligible heat for all levels of expected voice or music modulation. The amplified output level is set by the installer using a volume control located behind the speaker grill. The -PSP1AF includes an analog compressor/limiter that makes higher sound output levels possible without clipping.
The driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid structure. This produces sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker mounted in a wall.
Models are available with grills in black (DB-PSP1AF), white (D-PSP1AF), gray (DG-PSP1AF) or stainless steel (DS-PSP1AF).
Gain Set by the Installer Acoustically Optimized Decora Enclosure Fidelity Comparable to Larger Drivers Hemispherical Dispersion Mounted In Wall or Flat Surface
RDL 659 6th St. Prescott, AZ., USA 86301 (928) 443-9391 FAX (928) 443-9392 www.rdlnet.com
ACCESSORIES
Models D-PSP1AF, DB-PSP1AF, DG-PSP1AF, DS-PSP1AF
Decora-Style Active Loudspeaker - Format-A
Installation/Operation
Typical Performance reflects product at publication tim e exclusive of EMC data, if any, supplied with product. Specifications are subject to change without notice. This product is Professional Apparatus.
Pair A: Audio +4 dBu
Pair B: Audio +4 dBu
Pair C: Audio +4 dBu
Pair D: Power +24 Vdc
RJ45 Standard wiring
Tab on bottom of connector
RJ45 conductor colors shown are for 568A standard. The 568B standard may be used if the connectors at
both ends of the cable are wired identically.
(1) + White / Green (2) – Green (3) + White / Oran ge (4) – Blue (5) + White / Blue (6) – Orange (7) + White / Brown (8) – Brown
Set switch to
determine
which of the
three
FORMAT-A
pairs is
amplified.
Connect Twisted Pair Cable
TYPICAL PERFORMANCE
Input: RDL Format-A Input Connection: RJ45 Format-A Signal Pair Used: Switch-selectable A, B, or C (Rear-panel) Gain Adjustment: Single-turn audio taper (set by installer) Maximum SPL: 81 dB Frequency Range: 150 Hz to 20 kHz, nominal CMRR: > 80 dB (50 Hz to 120 Hz) Power Requirement: 24 Vdc @ 55 mA (Idle); 100 mA (maximum), Ground-referenced Ambient Operating Environment: 0° C to 40° C Maximum; 20° C Recommended Dimensions: Height: 4.13 in. 10.49 cm; Width: 1.7 in. 4.32 cm; Depth: 2.05 in. 5.21 cm
D SERIES - PSP1A
FORMAT A TP CABLE
ACB PAIR
REAR
directly to the output of a
FORMAT A SENDER.
FRONT
Adjust gain for the desired
listening level from the
speaker (Gain set by installer).
891-5669A
Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Loading...