ACCESSORY
BASE PLATE-2
PRODUCT INSTRUCTIONS
INTRODUCTION:
The RCBS® Accessory Base Plate-2 is a durable die cast aluminum plate
with a series of letter-coded tapped holes for mounting RCBS reloading
tools and accessories.
TO USE:
The Accessory Base Plate-2 attaches to the loading bench with the four
wood screws provided. A variety of RCBS tools and accessories can
be individually mounted to the Accessory Base Plate-2. A few examples
of equipment mounted to the Accessory Base Plate-2 are shown below.
Use the following chart as a guide for determining which bolt pattern to
use for the various tools and accessories. Fasteners needed to mount
the tools listed are included. When mounting a reloading press requiring
the “D” bolt pattern, use the washers provided under the bolt head.
TRIM PRO
POWDER MEASURE STAND
BOLT PATTERN TOOL OR ACCESSORY
A Trim Pro Manual Case Trimmer Rotary Case Trimmer-2
Trim Pro Manual Case Trimmer Stand Rotary Case Trimmer
B Powder Measure Stand
C Lube-A-Matic-2
Lube-A-Matic
C, D CaseMaster Gauging Tool*
D Rock Chucker Press RC Supreme
Reloader Special-5 Press The Grand
E APS Bench-Mounted Priming Tool Automatic Priming Tool
F Standard Priming Tool
G Partner Press
*Use the right “C” hole and the right “D” hole when mounting the CaseMaster Gauging Tool.
CASE MASTERRC SUPREME
PRECISIONEERED® RELOADING EQUIPMENT
We think that we make the very best
reloading equipment in the world.
If you disagree, tell us - we want to do something about it!
If you agree, please tell your friends.
Customer Service
1-800-533-5000
(US or Canada) or
530-533-5191
Hours: Monday - Thursday, 6:30am - 3:00pm (hours may vary)
e-mail: rcbs.tech@atk.com • www.rcbs.com
RCBS • 605 Oro Dam Blvd. • Oroville, CA 95965
OUTERS • RAMLINE • ORBEX • FEDERAL
CCI • SPEER • RCBS
7200543/0305
Loading...