RCA STB7766G1 Owner's Manual
user manual
STB7766G1
www.1800customersupport.com/RCA
It is important to read this instruction book prior to using your new product for the rst time.
- 24 -
SAFETY PRECAUTIONS
The lightning fl ash with an arrowhead symbol, within the
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of suffi cient magnitude to
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT
PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
Equipment tested for
compliance as a
complete unit
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit diff erent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifi cations not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
cause an electric shock.
The exclamation point within the equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this
owner’s manual.
- 1 -
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifi ers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong is provided for your safety. When the provided
plug does not fi t into your AC power outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specifi ed by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualifi ed service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power-supply cord or
plug is damaged, liquid has spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture , does not operate
normally, or has been dropped.
Portable Cart
Warning
- 2 -
ACCESSORIES
AC Adapter .............................................................................................................................. x 1
Remote Control ........................................................................................................................ x 1
AAA Batteries (for Remote Control) ......................................................................................... x 2
RF Cable .................................................................................................................................. x 1
CONTENTS
Safety Precautions ...................................... 1
Important Safety Instructions ..................... 2
Accessories ................................................. 3
Contents ....................................................... 3
Remote Control ................................................. 4
Quick Start Guide ........................................... 5-8
Control Reference Guide ............................. 9-10
Connections ................................................... 11
Connecting a TV(Using the RF Cable) ................. 11
Connecting a TV(Using the AV Cable) .................. 11
Power Supply ................................................. 12
Using the AC Adapter ......................................... 12
Turning on the Unit .............................................. 12
Dolby Digital ...................................................... 12
Basic Operation .............................................. 13
Searching for Channels Automatically ................ 13
Viewing the TV Channel ..................................... 13
Adjusting the Volume ......................................... 13
Viewing the Information ..................................... 13
Viewing Signal .................................................. 13
On-Screen Menu-Channel ....................... 14-15
Channel Scan/Add/ Edit ..................................... 14
Manual Scan ..................................................... 14
Output Channel ................................................. 15
On-Screen Menu-Option ........................... 15-17
Clock ................................................................ 15
Aspect Ratio ...................................................... 15
Language ......................................................... 16
Audio Language ................................................ 16
Caption Select .................................................. 16
DCC View .......................................................... 17
Power Save Mode ............................................ 17
Analog Audio ............................................ 17
On-Screen Menu-Lock ............................. 18-20
Lock System ..................................................... 18
Set Password .................................................... 18
Block Channel ................................................... 18
TV Rating-Children ............................................ 19
TV Rating-General ........................................... 19
Movie Rating ..................................................... 20
Downloadable RRT ........................................... 20
Maintenance ................................................... 21
Troubleshooting Guide ................................... 21
- 3 -
REMOTE CONTROL
• Point the remote control at the REMOTE SENSOR located on the unit.
• When there is a strong ambient light source, the perform ance of the infrared REMOTE SENSOR
may be degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
To Install Batteries
1. Open the battery door.
2. Insert two AAA batteries.
Battery Replacement
When the batteries become weak, the operating distance of the remote control is greatly reduced
and you will need to replace them.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
Notes:
• If the remote control is not going to be used for a long time, remove the batteries to avoid corrosion
damage caused by battery leakage.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Weak batteries can leak and severely damage the remote control.
• WARNING: Do not dispose of batteries in a fi re. Batteries may explode or leak.
- 4 -
QUICK START GUIDE
STEP 1: CONNECTIONS
When this converter box is powered on, digital signals from the ANTENNA RF IN jack are converted
to analog signals and output from the TV RF OUT jack or the VIDEO OUT jack.
When this converter box is in standby state, analog RF TV signals pass through the box and output
from the TV RF OUT jack.
Option One: Using the RF Cable to Connect a TV
1. Connect an antenna cable to the RF IN terminal on the rear of the unit.
2. Use the RF cable (included) to connect the unit and TV/Monitor.
3. Use the AC adapter (included) to connect a suitable wall outlet. The supplied 9V adapter operates
on AC 120V ~ 60Hz.
4. Turn on your TV and switch TV’s channel selection to
Note:
• If a local TV Station happens to broadcast on Channel 3, we recommend you switch the unit’s
Output Channel to Channel 4 (and switch TV to Channel 4), following the instructions on Page 14.
Rear of TV
Option Two: Using the AV Cable to Connect a TV
1. Connect an antenna cable to the RF IN terminal on the rear of the unit.
2. Use the AV Cable (not included) to connect the unit and TV/Monitor.
3. Use the AC adapter (included) to connect a suitable wall outlet. The supplied 9V adapter operates
on AC 120V ~ 60Hz.
4. Turn on your TV and follow the instructions included with it to select the “AV IN” function.
YELLOW
RED
Channel 3 .
Rear of TV
WHITE
YELLOW
Warning: This system does not support cable TV.
- 5 -
RED
WHITE
QUICK START GUIDE
STEP 2: TURNING ON THE UNIT
1. While the AC adapter is connected and the unit is on standby, power will be consumed and the
power indicator is RED.
2. Press the STANDBY/ON button to turn on the unit. The power indicator is GREEN.
STEP 3: SETTING THE OSD LANGUAGE
1. Press the MENU button on the remote
control.
2. Use the
menu.
3. Use the button to select Language then
press the ENTER button or the button.
4. Use the / buttons to select English /
Español (Spanish) / Français (French).
5. Press the EXIT button on the remote control to
exit menu.
STEP 4: SEARCHING FOR CHANNELS AUTOMATICALLY
1. Press the MENU button on the remote
control.
2. Use the
menu.
3. Use the
press the ENTER button or the button to start
scanning.
/ buttons to select the OPTION
DCC View
Power Save Mode
Analog Audio
/ buttons to select the CHANNEL
button to select Channel Scan and
STEP 5: VIEWING THE TV CHANNEL
Press the CH-/CH+ buttons to select a channel, or press the number button on the remote to select
the channel you want to watch.
• For channels 1 to 9, enter a one-digit channel number.
• For channels 10 to 69, enter the two-digit channel number.
Please read the Instruction Manual for further details on using the Converter Box.
- 6 -
QUICK START GUIDE
DISPLAY CONTENTS
When receiving a 16:9 digital broadcast signal, STB7766G1 Digital TV Converter will convert the
16:9 picture to fi t a 4:3 TV screen. Enter Aspect Ratio Menu to select among four conversion
modes.
AUTO MODE (DEFAULT)
Displays all programs based on the aspect ratio of the program to 4:3 TV screen.
Auto
DCC View
Power Save Mode
Analog Audio
CROPPED MODE
This mode uses the entire screen of your TV, but the left and right end of the picture will be removed
on 4:3 TV screen.
Cropped
- 7 -
Loading...