RCA RS2769iS User Manual

It's important to read this instruction prior to using your new product
for the fi rst time.

USER MANUAL

FCC information

This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.

This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant
to part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:

– Reorient or relocate the receiving

antenna.

– Increase the separation between

the equipment and receiver.

– Connect the equipment into an

outlet on a circuit different from
that to which the receiver is
connected.

– Consult the dealer or an

experienced radio/TV technician
for help.

WARNING:

Changes or modifications
to this unit not expressly approved by
the party responsible for compliance
could void the user's authority to
operate the equipment.

-1-

For your safety

The AC power plug is polarized (one
blade is wider than the other) and
only fits into AC power outlets one
way. If the plug won’t go into the
outlet completely, turn the plug
over and try to insert it the other
way. If it still won’t fit, contact
a qualified electrician to change
the outlet, or use a different one.

Do not attempt to bypass this
safety feature.

CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.

Technical information

Product: 5 Disc Audio System
Brand: RCA
Model: RS2769iS
Power Supply: 120V ~ 60Hz
Power Consumption: 240 Watts

Service information

This product should be serviced only
by those specially trained in appro­priate servicing techniques. For in­structions on how to obtain service,
refer to the warranty included in
this Guide.

WARNING: TO PREVENT FIRE OR
ELECTRICAL SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.

CAUTION: US E O F C O N T R O L S O R
ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN
THOS E S P E C I F I ED MAY RESULT I N
HAZ ARDOUS R ADIATION EXPOSURE.

CAUTION: DANGER OF EXPLOSION IF
BATTERY IS INCORREC TLY REPLACED.
REPL ACE ONLY W IT H THE S AME OR
EQUIVALENT TYPE.

WARNING : MAINS PLUG IS USED
AS DISCONNECT DEVICE AND IT
SHOULD REMAIN READILY OPERABLE
DURING INTENDED USE. IN ORDER TO
DISCONNECT THE MAINS PLUG FROM
MAINS COMPLETELY, THE MAINS
PLUG SHOULD BE DISCONNECTED
FROM THE MAINS SOCKET OUTLET
COMPLETELY.

Some of the following information
may not apply to your particular
product; however, as with any
electronic product, precautions
should be observed during handling
and use.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near
water.

• Clean only with dry cloth.

• Do not block any ventilation
openings. Install in accordance
with the manufacturer’s
instructions.

• Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.

• Do not defeat the safety
purpose of the polarized
or grounding-type plug. A
polarized plug has two blades
with one wider than the other.
A grounding type plug has two
blades and a third grounding

prong. The wide blade or the
third prong is provided for your
safety. If the provided plug does
not fit into your outlet, consult
an electrician for replacement of
the obsolete outlet.

• Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.

• Only use attachments/accessories
specifi ed by the manufacturer.

• Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury
from tip-over.

Portable Cart Warning

• Unplug this apparatus during
lightning storms or when unused
for long periods of time.

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

-2- -3-

-8-

-4-

-9-

Important Information

Precautions

• This compact disc player uses
a lase r to read t he music on
the disc. The laser mechanism
corresponds to the cartridge
and stylus of a record player.
Although this product
incorporates a laser pick­up lens, it is completely safe
when operated according to
directions.

• Dis c s ro t a te a t h ig h s pe e d
inside the player. Do not use
damaged, warped, or cracked
discs.

• Do not touch the pick-up lens
which is loca te d i n s i d e t h e
disc compartment. To keep
dust from collecting on the
pick-up lens, do not leave the
compartment door open for
an extended period of time.
If the lens be com e s d i r ty,
cl ea n i t w ith a s oft b r u s h ,
or use an air blower bru s h
designed for camera lenses.

Headset safety

• Have a Blast-Just Not
in your eardrums!
Make sure you
turn down the volume on
the unit before you put on
headphones. Increase the
volume to the desired level
only after headphone are in
place.

• Do not play your headset at
high volume. Hearing experts
warn against extended high­volume play.

• If you experience ringing in
your ears, reduce volume or
discontinue use.

• You should use with extreme
caution or temporarily
discontinue use in potentially
hazardous situations.

Even if your headset is an

open-air designed to let you
to hear outside sounds, do
not turn up the volume so
high that you are unable to
hear what is around you.

• Excessive sound pressure from
earphones and headphone
can cause hearing loss.

Getting Started Getting Started

Unpacking the system

You should have the following:

• one main unit (with two surround
speakers)

• one remote control

• one AM loop antenna

• one user manual

Connections

Back view

1. AM loop antenna jack

2. FM pigtail antenna

3. Speaker jacks

Using FM and AM antennas

Before you use your audio system,
you’ll want to make sure both
the FM and AM antennas are po­sitioned properly. Uncoil the FM
antenna at the back of the unit,
making sure it is fully extended
(you may even want to tape it to
the wall behind the unit if possi­ble, the higher the better).

You’ll also need to connect the AM
antenna loop to the back of the
unit if you listen to AM stations.
Rotate the AM loop antenna for
better reception.

-5-

-6-

-11- -12- -13-

-7-

Connecting speakers

Each speaker wire has different
color matching with the speaker
jacks on the main unit. When
connecting the speakers, match
the red wires to red jacks, purple
wires to purple jacks, grey wires
to grey jacks, and black wires to
black jacks. Be sure to connect
the large main speakers to the
terminals marked “MAIN SPEAK­ER” and “SUBWOOFER”. Con­nect the smaller rear “surround”
speakers to the terminals marked
“REAR SPEAKER”.

Installation

To ensure sufficient ventilation,
keep the spacing shown below
free from other surfaces:

Front view

Side view

4”

4”4”

4”

2”

Release tab to
lock wire in the
terminal.

NOTE: Make sure the insulation
is completely removed from the
ends of the speaker wires at all
connection points.

Push speaker
terminal tab
down to insert
wire.

Unit Controls

Main Unit

– To play or pause CD/iPod.

– To stop CD/iPod playback.

PRESET

/ – To select the

previous or next preset stations in
tuner mode.

SHUFFLE – To turn on/off random
playback.

PLAY MODE – To cycle between
different play mode.

LINE IN – Ø3.5mm jack for
external audio sources.

AUX IN•L/R – Jacks for external
audio sources.

BASS – To turn BASS on or off.

EQ – To select the equalizer

presets.

– Jack for connecting headphones

ON/STANDBY – To turn power
on or off (STANDBY mode).

AUTO PROG•BAND – To toggle
between AM and FM. Also used
to auto-preset radio stations in
FM mode.

SOURCE – To select among CD
player, TUNER, iPod, LINE IN and
AUX sources.

PROGRAM – To enter program
mode for CD and tuner.

CLOCK – To show time and enter
clock setting mode.

TIMER – To turn the timer on/off;
press and hold to enter the timer
setting mode.

DIMMER•DEMO – To turn the
feature demonstration on or off;
to adjust display brightness.

SLEEP – To select the time
interval in minutes before the
unit turns off.

– To open or close the disc tray.

DISC SKIP – To skip to the next

CD in the tray in CD mode.

VOLUME – To increase/decrease
the volume.

/ – To tune radio frequency;
to skip CD/iPod track; to fast
search through current CD/iPod
track.

EQ

BASS

CLOCK

DIMMER

5 CD CHANGER

DEMO

SLEEP

DISC SKIP

TIMER

PROGRAM

SOURCE

PLAY
MODE

SHUTTLE

AUTO
PROG BAND

Remote control

– To turn power on or off

(STANDBY mode).

CD – To select the CD player.

TUNER – To select the tuner and

change the radio band.

INFO – To select among disc
display information.

iPod – To select iPod playback.

The remote control
must be inserted with
2 “AAA” batteries
prior to use.

FM ST. – To switch between ST
on and off modes.

LINE IN/ AUX – To select the
external sound input from LINE
IN/ AUX IN jacks.

DISC SKIP – To skip to next CD in
CD mode.

VOL+ / VOL– – To increase/
decrease the volume.

– To play and pause CD/iPod

playback.

PREV/

,NEXT/ – To tune radio
frequency; to skip CD/iPod track;
to fast search through current
CD/iPod track.

OPEN/CLOSE – To open and close
CD disc tray.

STOP – To stop playing CD/iPod.

PLAY MODE – To cycle between

different play mode.

– To mute and restore audio

output.

SHUFFLE – To turn on/off random
playback.

MENU – To display iPod menu;
and return to previous menu.

SELECT – To confirm iPod menu
lists.

INTRO – To turn INTRO mode on
or off to play the first 10 seconds
of each track.

PRESET – To select previous
/ next tuner preset station; to
navigate the iPod menu list.

SLEEP – To select the time
interval in minutes before the
unit turns off.

Remote Control

-10-

CD tray status:
Lights when loaded
Flashes for the current disc
Animates when playing

Source indication

Display

Product demonstration mode

Press DIMMER•DEMO to turn
on/off demonstration mode. The
demonstration scrolls through all
display operations.

Display brightness

1. Press and hold DIMMER•DEMO
for more than 2 seconds.

2. While “DIM” is displayed,
press DIMMER•DEMO
repeatedly to select the
desired level (DIM 1–3).

Radio bands

BASS – bass boost activated

STEREO – FM stereo mode acti-

vated

EQ – preset equalizer activated

PROG – program playback mode

activated
SLEEP – sleep mode activated

Timer activated

Playback
mode
status

Clock and Timer

Setting the clock

1. Press and hold CLOCK until
the hour flashes on the
display.

2. Press

/ to set the hour
and then press CLOCK to
shift to minute digits.

3. Press

/ to set the

minute.

4. Press CLOCK to save settings.

• When system is
ON, you can tap
CLOCK to display
the current time – it will
display time for about 2
seconds.

• When the system is OFF
(standby), the display will
turn off to save power.

Note: To avoid startling you or
other individuals in your home,
this product will not turn on at a
volume higher than 15.

7. Press TIMER to save settings.

Activating the timer

Tap TIMER to turn on/off the
timer. The timer is active when
the clock icon

is lit.

Sleep mode

You can select the time interval in
minutes before the unit turns off
automatically.

1. Press SLEEP to select among
OFF, 120, 90, 60, 45, 30, 15, 10
and 5 minutes. The sleep icon
lights on the display when
sleep mode is activated.

2. When sleep is activated, press
SLEEP once to view remaining
sleep time. Press SLEEP again
when the remaining sleep
time is displayed to change
the sleep time.

• Sleep is automatically de­activated when the unit is
turned off.

Setting the timer

•

For RADIO timer, tune in to a
desired station.

• For CD timer, insert a CD into
the unit.

• For iPod timer, insert your
iPod into the connector.

1. Press and hold TIMER until
ON (timer on time) appears
with the hour fl ashing.

2. For setting time, press

/
to set the hour and then press
TIMER to shift to the minute
digits.

3. Press

/ to set the minute.

4. Press TIMER to change to OFF
(timer off time) with hour
flashing. Repeat steps 2 & 3
for timer off time setting.

5. Press TIMER to select the
source. Press

/ to select

among TUNER, CD or iPod.

6. Press TIMER to set the
volume. Adjust the timer
volume by pressing

/
to select the desired volume
level.

Clock and timer

Bass boost

Press BASS to turn on/off boosting
the bass frequency. The BASS icon
lights on the display when it is
activated.

Muting audio

Press on the remote control to
cut or restore the sound.

Using preset equalizer curves

Press EQ on the unit to select
among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The dis­play shows your selection briefly.

Creating a Custom Curve

1. Press EQ on the unit to select
the CUSTOM mode.

2. While CUSTOM is displayed,
press

/ to cycle among
the displayed BASS and TREB
range levels.

3.While BASS or TREB is
displayed, adjust the volume
to set the associated gain
between -10 - +10.

4. Press EQ to exit.

Sound Features

-14-

This Class B digital apparatus complies
with Canadian ICES-003.

Caution:

This product utilizes a laser. Use
of controls or adjustments or
performance of procedures other
than those specified may result in
hazardous radiation exposure. Do
not open covers and do not repair
yourself. Refer servicing to qualified
personnel.

• Connect power cord only to AC power source as marked on the
product.

•

Care should be taken so that objects do not fall into the product.

• Do not attempt to disassemble the cabinet. This product does not
contain customer serviceable components.

•

Main plug is used as disconnect device and it should remain readily operable
during intended use. In order to disconnect the apparatus from the mains
completely, the mains plug should be disconnected from the mains socket
outlet completely.

IF YOUR PRODUCT OPERATES ON BATTERIES, adhere to the
following precautions:

A. Do not mix old and new batteries.
B. Do not mix alkaline, standard (carbon-zinc), or rechargeable (NiCd,

NiMH, etc) batteries.

C. Any battery may leak electrolyte or explode if disposed of in fi re or an

attempt is made to charge a battery not intended to be recharged.

D. Discard leaky batteries immediately. Leaking batteries can cause skin

burns or other personal injury. When discarding batteries, be sure to
dispose of them in the proper manner, according to your state/provincial
and local regulations.

E. Battery shall not be exposed to excessive heat such as sunshine, fire or

the like.

IMPORTANT SAFETY

INSTRUCTIONS

Unit Controls

Remote Control

CLASS 1 LASER PRODUCT

This product contains a low

power laser device.

THE LIGHTNING FLASH AND ARROWHEAD
WITHIN THE TRIANGLE IS A WARNING SIGN
ALERTING YOU OF "DANGEROUS VOLTAGE"
INSIDE THE PRODUCT.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

THE EXCLAMATION POINT WITHIN THE
TRIANGLE IS A WARNING SIGN ALERTING
YOU OF IMPORTANT INSTRUCTIONS
ACCOMPANYING THE PRODUCT.

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USERSERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

• Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus
has been damaged in any way,
such as power-supply cord or plug
is damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.

ADDITIONAL SAFETY
INFORMATION

• Apparatus shall not be exposed
to dripping or splashing and no
objects filled with liquids, such
as vases, shall be placed on the
apparatus.

• Always leave sufficient space
around the product for
ventilation. Do not place
product in or on a bed, rug, in
a bookcase or cabinet that may
prevent air flow through vent
openings.

• Do not place lighted candles,
cigarettes, cigars, etc. on the
product.

RS2769iS

AM loop antenna

(included)

REAR SPEAKER

MAIN

SPEAKER

(L)

REAR

SPEAKER

(R)

REAR

SPEAKER

(L)

MAIN

SPEAKER

(R)

AM LOOP

FM ANTENNA

21

RS2769iS English IB.indd 1RS2769iS English IB.indd 1 12/8/2009 3:45:30 PM12/8/2009 3:45:30 PM

Loading discs

1. Press SOURCE repeatedly to
select CD mode.

2. Press OPEN/CLOSE or

to

open the drawer.

3. Insert up to fi ve discs with la­bel face up. (Press DISC SKIP
to rotate the disc carrier.)

4. Press OPEN/CLOSE or

to
close the drawer. Loaded disc
position icon lights.

Selecting discs

Press DISC SKIP to skip discs.

Playing discs

• Press to begin or pause
playback, and

to stop

playback.

• Press

/ to select a

specifi c track.

Searching through a CD

Press and hold / to search
through a CD while it is playing.

Shuffl ing play order

Press SHUFFLE to turn on/off the
playing of tracks in random order.

Sampling tracks

Press INTRO to play the first 10
seconds of each track on the
current disc, all discs in the tray,
or turn INTRO mode off.

Play mode

Press PLAY MODE to cycle
between Repeat 1, Repeat 1 Disc,
Repeat All Discs, 1 Disc, and All
Discs.

• Press INFO
repeatedly to view
elapsed track time,
track remain time and
disc remain time during
playback.

• You may also press PLAY
MODE to select 1 disc or
all discs before activating
INTRO & SHUFFLE functions.

CD Playback CD Playback

-15-

You can program the CD player
to play up to any 32 tracks on the
CDs in the tray.

1. While the CD player is
stopped, press PROGRAM to
enter program mode. The sys­tem displays the next available
program number: “- - P 01,”
with “- -” flashing, prompts
you for the first track in the
program list.

2. Press

/ to select a track
(Press DISC SKIP to select a
track from a different disc).

3. Immediately press PROGRAM
to assign the selected track to
the program number. You are
prompted for the next track in
the program list. (In CD pro­gram mode, PROG icon will be
lit.)

Playing a program List

While in PROGRAM mode, press

.

Displaying the program List

1. While the CD player is
stopped, press PROGRAM to
enter PROGRAM mode.

2. Press PROGRAM repeatedly
to list each track assignment
in the program list.

Deleting program List

While in PROGRAM mode, press
and hold

for 3 seconds. The unit

displays the message “CLEAR”.

(dock adapter is not included

with this Audio System)

2. Insert your iPod Dock Adpater
into the dock until it sits firmly
in place.

Removing an iPod Dock
Adapter

Remove the iPod Dock Adapter
as illustrated.

Listening to your iPod

Insert your iPod into the con­nector in the dock.

1. Press

to begin or pause

playback, and STOP/

to stop

playback.

2. Press

/ to select a specifi c

CD Program CD Program

-16-

Compatible iPod Types

• iPod touch (1st generation )
8GB, 16GB, 32GB

• iPod touch (2nd generation )
8GB, 16GB, 32GB

• iPod classic 80GB,120GB,
160GB

• iPod 5th generation (video)
30GB, 60GB, 80GB

• iPod nano 4th generation
(video) 8GB, 16GB

• iPod nano 3rd generation
(video) 4GB, 8GB

• iPod nano (2nd generation)
2GB, 4GB, 8GB

• iPod nano (1st generation)
1GB, 2GB, 4GB

Note: also supports iPhone when
iPhone is set to “airplane mode".

Installing an iPod Dock
Adapter

1. Choose the iPod Dock Adapter
that fits your iPod, we recom­mend using the adapter that
was supplied with your iPod.

iPod Playback

-17-

iPod Playback

-18-

• Your iPod will
be charged
automatically
(until fully charged) once it
is docked.

• iPod charging function is
inactive when the main unit
is on standby position and
powered off.

• To prevent interference to
AM radio signals, please
switch off the iPod while
listening to AM Radio.

Radio

Press SOURCE or TUNER on the
remote control to select TUNER.

Selecting tuner band

Press AUTO PROG•BAND on the
unit or TUNER on the remote
control to select between AM
and FM radio bands.

Tuning to a station

Press / to select frequencies.
Press and hold to start auto
searching for the next available
station.

Preset and tune modes

The tuner can be in either TUNER
or PRESET mode. When in PRESET
mode, the PROG indicator is on.

Presetting stations

Manually setting presets

1. Press

/ to access the

desired frequency.

2. Press PROGRAM button.

The most recently accessed
program location will be
displayed.

3. If a different program
location is preferred, press

/ to select the desired

preset number (1-32).

4. Press PROGRAM to store the
selected frequency at that
preset.

Auto preset programming (FM
only)
Press and hold AUTO
PROG•BAND for 2 seconds to

scan stations in the FM band. The
stations will then be stored as
preset channels. A maximum of
32 stations can be stored.

Beware of your preset channels
being erased accidentally because
the scanning and storing process
is automatic upon pressing and
holding the button for 2 seconds.

-19-

You can stop the automatic
scan by pressing TUNE+/TUNE-
button, but the erased stations
cannot be recovered.

Using presets

Press PRESET to access the
previous or next preset station.
The display first shows the preset
program number and after a few
seconds, the frequency will be
displayed. (e.g. P 01 is preset 1)

Suppressing stereo signal

Press FM ST. to select between
ST ON and ST OFF for stereo FM
stations.

Radio LINE IN/ AUX

Play external sound
through the speaker
system

Press SOURCE on the unit repeat­edly to select LINE IN or AUX mode.
Or press LINE IN/AUX on the re­mote control to change to LINE
IN mode from CD, TUNER or iPod
mode; press LINE IN/AUX again to
change to AUX mode.

Suggest using Ø3.5mm
LINE IN jack for mp3
player and AUX IN jacks
for auxiliary equipment such
as DVD, VCR or PC.

Troubleshooting Tips

System will not turn on

• Check power cord for a secure
connection.

• Unplug the unit for a mo­ment, and then plug into
power source again.

• Check the outlet by plugging
in another device.

No sound

• Increase the volume setting.

• Check connection to speakers.

•

Check that you have selected
the appropriate function: CD,
TUNER, iPod, LINE IN/AUX.

• Make sure mute is off.

• Make sure headphones are
not plugged in.

Poor radio reception

• Check antenna connection.

• Move antenna.

• Turn off nearby electrical ap­pliances, such as hair dryer,
vacuum cleaner, microwave,
fl uorescent lights.

CD does not play

• Check that CD is in the tray.

• Check that CD label is facing
up.

• Check that PAUSE mode is not
on.

• Check that CD function is se­lected.

• Use CD lens cleaner.

• Clean the disc.

• Try another CD.

CD sound skips

• Clean the disc.

• Check disc for warping,
scratches, or other damage.

• Check if something is causing
the system to vibrate. If so,
move the system.

• Make sure the speakers are at
least 3 feet away or on a dif­ferent surface from the main
unit.

CD button will not respond, or
does not change discs when
you press DISC SKIP

• Switch to another function
(TUNER, iPod, LINE IN/AUX)
and then back to CD.

-20-

-21-

-26-

-22-

-27-

Remote control does not work

• Check that the batteries are
properly installed.

• Replace weak batteries.

• Check the system is plugged
into power source.

• Point the remote directly at
the system’s front panel.

• Move closer to the system.

• Remove any obstacles be­tween the remote and the
system.

iPod does not respond to the
speaker system

• Remove your iPod from
the dock and check for
obstruction on the connectors
in the dock and on your iPod.

• Make sure that your iPod
is working properly before
docking into the unit. Please
refer to your iPod manual for
details.

Troubleshooting Tips

Additional
Information

Disconnect the audio system from
the power source before per­forming any maintenance.

Cleaning

Clean the exterior of the system
using a soft dust cloth.

CD Player

CAUTION! This system operates
with a laser. It must be opened
by only a qualified technician.

Handling CDs

• Do not touch the signal sur­faces. Hold CDs by the edges,
or by one edge and the hole.
Do not affi x labels or adhesive
tapes to the label surfaces. Do
not scratch or damage the la­bel. CDs rotate at high speeds
inside the player. Do not use
damaged (cracked or warped)
CDs.

Cleaning CDs

• Dirty CDs can cause poor
sound quality. Always keep

CDs clean by wiping them
gently with a soft cloth from
the inner edge toward the
outer perimeter.

•

If a CD becomes dirty, wet a
soft cloth in water, wring it
out well, wipe the dirt away
gently, and then remove any
water drops with a dry cloth.

• Do not use record cleaning
sprays or antistatic agents on
CDs. Also, never clean CDs
with benzene, thinner, or oth­er volatile solvents which may
cause damage to disc surface.

CD Lens Care

When your CD lens gets dirty it
can also cause the system to out­put poor sound quality. To clean
the lens you will need to pur­chase a CD lens cleaner which can
maintain the output sound quali­ty of your system. For instructions
on cleaning the CD lens, refer to
the ones accompanying the lens
cleaner.

Additional Information

Technical specifi cations

Power supply: 120V~60Hz
Dimensions ( W x D x H inches):
Unit size - 11.0 x 17.3 x 12.0
Main unit weight: 16.06 lbs
CD player: Response curve (+/­2dB): 60Hz to 15 kHz
Rating Plate: Look for it at the
back of the set.

The descriptions and character­istics given in this document are
given as a general indication and
not as a guarantee. In order to
provide the highest quality prod­uct possible, we reserve the right
to make any improvement or
modification without prior notice.
The English version serves as the
final reference on all products
and operational details should
any discrepancies arise in other
languages.

Limited Warranty

-23-

-28-

-24-

-25-

AVC MULTIMEDIA (“AVC”) makes the following limited warranty.
This limited warranty extend to the original consumer purchaser and
is limited to non-commercial use of the product.

One Year Parts & Labor Warranty
AVC products purchased in the United States or Canada are warranted

to be free from defects in materials or workmanship for a period of
one year from the date of their original retail purchase. If the unit fails
to conform to this warranty, we will service the product using new or
refurbished parts and products, at AVC’s sole discretion.

During a period of one year from the effective warranty date, AVC will
provide, when needed, service labor to repair a manufacturing defect at
its designated Service Center. To obtain warranty service in the United
States or Canada, you must fi rst call our Customer Support Center
at 1-877-252-6873, during the hours listed in the box below.
The determination of service will be made by AVC Customer Support.

PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR
AUTHORIZATION. New or remanufactured replacements for defective

parts or products will be used for repairs by AVC at its designated Service
Center for one year from the effective warranty date. Such replacement
parts or products are warranted for an additional one year from the
date of repair or replacement. The Customer will be required to ship
the unit to the Service Center indicated at the time Customer Support
is contacted to make the necessary repairs. The customer is responsible
for all transportation charges to the service facility.

Packaging and Shipping Instruction

When you send the product to the AVC service facility you must use
the original carton box and packing material or an equivalent as des­ignated by AVC.

Your Responsibility

(1) You must retain the original sale receipt to provide proof of

purchase.

(2) These warranties are effective only if the product is purchased and

operated in the United States or Canada.

(3) Warranties extend only to defects in material or workmanship, and do

not extend to any product or parts which have been lost or discarded,
or damage to product or parts caused by misuse, accident, improper
operation or maintenance, or use in violation of instructions provided
with the product, or to product which has been altered or modifi ed
without authorization of AVC, or to products or parts thereof which
have had the serial number removed or changed.

Limited Warranty

Limited Warranty Limited Warranty Limited Warranty

Out of Warranty

In the event your product requires repair after the
limited warranty period has expired, please contact our

Customer Support Center at

1-877-252-6873 or

www.RCAav.com

Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,
Saturday: 9am–NOON Eastern time.
Important:

You are responsible for any transportation, shipping or insurance
relative to the return of product to our Product Returns Center.

All warranties implied by state law, including the implied warranties
of merchantability and fi tness for a particular purpose, are expressly
limited to the duration of the limited warranties set forth above. With
the exception of any warranties implied by state law as hereby limited,
the foregoing warranty is exclusive and in lieu of all other warranties,
guarantees, agreements and similar obligations of manufacturer or
seller with respect to the repair or replacement of any parts. In no event
shall AVC be liable for consequential or incidental damages.

No person, agent, distributor, dealer or company is authorized to
change, modify or extend the terms of these warranties in any manner
whatsoever. The time within action must be commenced to enforce
any obligation of AVC arising under the warranty or under any statute,
or law of the United States or Canada or any state thereof, is hereby
limited to one year from the date of purchase. This limitation does not
apply to implied warranties arising under state law.

This warranty gives you specifi c legal rights and you may also have other
rights, which may vary, from state to state. Some states do not allow
limitation on how long an implied warranty lasts, when an action may
be brought, or the exclusion or limitation of incidental or consequential
damages, so the above provisions may not apply to you.

For more information on other products and services, please visit our

web site at

www.RCAav.com

Important: Also keep your “Bill of Sale” as proof of purchase.

Model no. ...........................................................................................................

Product name .....................................................................................................

Type of set. .........................................................................................................

Serial no. .............................................................................................................

Invoice no. ..........................................................................................................

Date purchased ..................................................................................................

Dealer name .......................................................................................................

FOR SUPPORT, SERVICE AND REPAIR, PLEASE VISIT

www.RCAav.com

Specifi cations and external appearance are subject to change without
notice.

© 2009 AVC MULTIMEDIA

This unit is compatible
with CD-RW/ CD-R discs

for playback.

Notes on CD-R/RW Disc:

• Do not affi x any type of labels
to either side (recordable or
labeled side) of a CD-R/RW
disc as this may result in the
unit malfunctioning.

• To avoid damages to the
CD-R/RW disc, do not open
the disc compartment door
while the disc is being read.

• Do not load an unrecorded
CD-R/RW disc into the unit.
This may take a longer time
to read the disc.

• Playback capability for CD­RW discs may vary due to
variations in the quality of the
CD-RW disc and the recorder
used to create the disc.

CD Playback

CD-R / RW

Please take care
when loading or
unloading discs in
the disc drawer. Read below
for details.

• Remove all discs from the
disc drawer before moving
or transporting the unit.

• Do not put discs in the
trays of the disc drawer
when they are still moving.

• Do not push or force the
rotation of the disc trays.
Always use the DISC SKIP
button.

• Do not put discs in any

unexposed disc trays.
Only put disc in tray
that is fully exposed.

• If an error occurs and the
disc drawer does not close,
empty all disc trays and try
again.

track. (You may also use the
control wheel and keys on
your iPod to operate it.)

3. Press and hold

/ to search
through a track while it is play­ing.

4. Press MENU to display iPod
menu, press again to return to
previous menu.

5. Press

PRESET on the
remote control to navigate
iPod menu lists.

6. Press SELECT to pick item in
iPod menu list.

811-278691W010

Printed in China

RS2769iS English IB.indd 2RS2769iS English IB.indd 2 12/8/2009 3:45:31 PM12/8/2009 3:45:31 PM