42” LED Television
MODEL: RLED4250A
Contents
Contents
Caution
Safety Information
Unit and Accessories
Introduction
1. Front View
2. Rear View
3. Instruction for Wall Mount
4. Remote Control
Basic Operation
OSD Menu
1. Picture menu
2. Audio menu
3. Time menu
4. Setup menu
5. Lock menu
6. Channel menu
2
3
4
5-9
5
6
7
8-9
10
11-17
11
12
13
14
15
16-17
Simple Troubleshooting
18
19-20
1
Caution
Caution
is intended to alert the user to the presence of un-insulated "dangerous
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live
in!
This unit complies with America Safety directives.
3124140
CERTIFIED TO CSA STD. C22.2 No.60065
This unit complies with FCC directives.
2
Safety Information
Electrical safety
Safety Information
Physical safety
3
Unit and Accessories
Unit and
Accessories
TV set
Instructions for fixing stand
INPUT
123
456
789
0 -/--
PICTURE SOUND SLEEP DISPLAY
EXIT
MTS
CC EPG
CH+
MUTE
CH-
MENU
OK
FAV
VOL+
VOL-
Remote control
Batteries: 2xAAA
User's manual
Instructions for
fixing stand
Warranty Card
4
Introduction
1. Front View
Introduction
INPUT MENU CH+ CH- VOL+ VOL- POWER
Led Indicator Remote Control window
(Keep clear)
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
The effective receiving range for the signal is 5-8 metres from the front of the remote
0
control window, and 30
to the left or right side and 200 above or below the remote control
window.
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
TV
AV
Component
HDMI1
HDMI2
HDMI3
VGA
POWER: Turn on/standby the TV set.
Press INPUT button on the TV set or remote control to
display the input source menu, and use CH+/- button on
the TV set or
/ button on remote control to select the
input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.
5
2. Rear View
Introduction
Headphone out
PC
audio in
COAX
RF
L-IN
VIDEO R-IN
AC POWER IN
HDMI1 HDMI2 HDMI3
AC POWER IN:
Service
HDMI1/2/3
: For service use only.
: Connect it to the HDMI of DVD or other equipment.
Headphone out
Service
Connect to an earth 100-240V~ 50/60Hz outlet with the Power Cable.
: Connect it to your headphone or other audio equipments.
COAX : Digital coaxial output.
: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
RF
: Connect them to audio output terminal of DVD. (shared with YPbPr)
L/R-in
VIDEO : Connect it to video output terminal of DVD.
YPbPr : Connect them to the video output terminal of DVD.
YPbPr
VGA
6
Introduction
3. Instruction for Wall Mount
The wall mount kit (not included) with your purchase allows you to mount your
RCA TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. RCA is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
Dimensions for Mounting Hole Pattern
200mm
200mm
-
This RCA TV is compatible with a 200mm x 200mm mounting hole pattern.
- 4 pcs of type M5 screws are required for installing the wall mount bracket to
your RCA TV. Do not use screws that are longer than 15 mm. Screws that
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. RCA is not liable for these kinds of
incidents
- Do not mount your RCA TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
7
Introduction
4. Remote Control
The remote control is using Infra-Red(IR). Point it towards the front of the LED TV. The remote
control may not work correctly if it is operated out of range or out of angle.
INPUT
123
456
789
0 -/--
PICTURE SOUND SLEEP DISPLAY
VOL+
VOL-
EXIT
MUTE
MENU
OK
CC EPGMTS
FAV
CH+
CH-
POWER(red button): Turn the TV on/standby.
INPUT: Press to display the input source menu.
Number Buttons: Choose channel directly.
Select channel 5, Press button "5";
Select channel 62, Press button "6", then press button "2" in 2
seconds;
Select channel 151, Press button "1", and press button "5" in 2
seconds, and press button "1" in 2 seconds;
Select channel 5-1, Press button "5", and press button "- / - -"
in 2 seconds, and press button "1" in 2 seconds;
(RETURN): Return to the previous channel viewed.
PICTURE: Press repeatedly to cycle through the available
video picture modes.
SOUND: Press to cycle through the different sound settings.
SLEEP : Shutdown timer.
DISPLAY: Display the information of current mode.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
MUTE: Press to mute the sound, press again or press VOL+ to
unmute.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
Thumbstick(
): Allows you to navigate the on-screen
menus and adjust the system settings to your preference.
OK: CONFIRM button.
CC: Press to display the closed caption.
MTS: Press to select the audio channels.
EPG: Press to enter the EPG menu directly.
FAV: Press to add or remove favorite channel.
Universal Remote Code:11359
Universal Remote Control not included.
8
Introduction
Installing Batteries
1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix different types or used batteries with new ones.
3. Close the cover.
- The remote control should be operated within 30 feet(7m) and 30
IR receive at the front of the LED TV.
- Used batteries should be disposed properly.
0
to the left and right of the
9
Basic Operation
Power on/off
1. -To turn on the Switch
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display input
source menu, and use CH+/- button on the TV set or ġĢbutton
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Main menu
Picture
Audio
Time
Setup
Lock
Channel
TV
AV
Component
HDMI1
HDMI2
HDMI3
VGA
Submenu
(Setup menu
for example)
Hint---you should operate the OSD menu according to the hint.
Use /
In the submenu, use /
or press button to enter the submenu.
button to select the main menu, and press button to enter the submenu.
Ģ
ġ
ġĢ
button to select the function item, press button to adjust/setup,
Ģ
Ģ
/
ġ
Ģ
* (Press MENU button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operate the OSD menu according to hint on the bottom of the banner.
10
OSD Menu
1. Picture menu
OSD Menu
Description
Picture mode: Select between Standard, Dynamic, Mild, SportsˈUser and Power Saving.
You may select the picture mode directly by pressing the PICTURE button on the remote
control.
Note: when select the "Power Saving", the machine is in energy-saving status.
Contrast: Control the difference between the bright and dark regions of the screen picture.
Brightness: Adjust brightness of the picture.
Color: Adjust color of the picture.
Tint: Control the fresh tones to make them appear natural.
Sharpness: Set the amount of fine detail in the picture.
Color Temp.: Select between Normal, Cool and Warm.
11
2. Audio menu
Picture Audio
OSD Menu
12
6
Time Channel
Setup
Lock
MoveSelect
Flat
Off
PCM
English
MENU
50
50
50
Exit
Sound Mode
Bass
Treble
Balance
Surround
SPDIF Type
Audio Language
Description
Sound Mode: Select your desired picture mode as follow: Flat, Music, Movie, Sports and User
You may select the sound mode directly by pressing the SOUND button on the remote control.
Bass: Low frequency intensity.
Treble: High frequency intensity.
Balance: Left and right stereo audio channels balance.
Surround: Activate or deactivate the Surround function.
SPDIF Type: Allows you to select between PCM and RAW.
Audio Language: Select audio language.
12
3. Time menu
Description
OSD Menu
Sleep timer: You may set the automatic shutdown timer choosing from 5 to 240 minutes, or
deactivate this function.
Time zone: Select between Pacific, Alaska, Hawaii, Eastern, Central and Mountain.
Daylight Saving Time: Select between On and Off.
Clock: User can not change time manually during DTV mode, for time is from signal source
directly.
13
OSD Menu
4. Setup menu
Description
Menu Language: Select OSD menu language.
Transparency: Turn on or off the transparency menu function.
Zoom Mode: Select the zoom mode between 16:9, 16:9 zoom, 4:3, 4:3 zoom.
Noise reduction: Select the noise reduction mode between Strong, Off, Weak and Middle.
PC SETUP: If the video input signal comes from your
PC, you may adjust the V-Position, H-Position, Clock,
Phase or even perform an Auto adjustment.
Closed Caption:
CC Mode: Allow you to select the CC Mode among: On, Off and CC on Mute.
Basic Selection: Allow you to select the basic selection among: CC1, CC2, CC3, CC4,
Text1, Text2, Text3 and Text4.
Advanced Selection: Allow you to select the advanced selection among: Service1, Service2,
Service3 Service4, Service 5 and Service 6.
Option: Use thumbstick buttons to operating in option menu as your desire.
XVS: Activate/deactivate the automatic dynamic brightness function.
Restore Default: Restore all settings in SETUP menu to factory settings.
14
OSD Menu
5. Lock menu
You must enter the password to gain access to the Lock menu. The default password is 0000.
You may modify the following options:
Description
Change password: Change the password, you must enter the new password twice to confirm it.
Note: Do not forget the password.
System Lock: Allow you to turn on or off the system lock. If deactivated, the functions described below
don’t work.
This option menu allows you to lock any TV channel or adjust the Movie rating filter.
US:
Canada:
TV: Use buttons to select the desired rating
and press button to block or unblock rating.
ġĢ
Ģ
MPAA: The Movie rating (MPAA) is used for original
movies rated by the Motion Picture Association of
America (MPAA) as broadcasted on cable TV and not
edited for television.
Use button to select N/A, G, PG, PG-13, R,
ġĢ
NC-17 or X.
G: General Audiences. Movie is appropriate for all ages.
PG: Parental Guideance Suggested. May contain material not
suited for younger viewers.
PG-13: Contains content that may not be appropriate for viewers
under the age of 13.
R: Restricted. Contains adult content, no one under 17 admitted
without parent.
NC-17: No one 17 and under admintted.
X: Adults only.
Canada English: Select among: E, C, C8+, G, PG,
14+ and 18+.
Canada French: Select among: E, G, 8ans+, 13ans+,
16ans+ and 18ans+.
Reset RRT: Allow you to reset the RRT setting.
15
OSD Menu
6. Channel menu
Description
Air/Cable: Allow you to select antenna between Air and Cable.
If you selet “Cable”, the following items(Favorite, Show/Hide, Channel NO, Channel Label and
DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.
ƾ
If you select “Cable” as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Ģ
Use button to highlight the “Start to Scan”, then press
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
ƾ
If you select “Air” as input signal in Antenna item, you
can press button to search the channels automatically.
Ģ
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC or ATSC
mode, please wait patiently.
Favorite: Allow you to add these channels which you desired
as the favorite channels.
Ģ
Use / button to highlight the desired item, then press
Ģ
OK button to add or remove the highlighted channel as
favorite.
Ģ
16
OSD Menu
Show/Hide: Allow you to show or hide the channels.
Ģ
Use / button to highlight the desired item, then press
Ģ
OK button to show or hide the highlighted channel.
Channel No.: Show and select the channel.
Channel Label: Allow you to setup a label for the channel.
Press / button to select the position of the table, and press / button to select the
Ģ
Ģ
Ģ
Ģ
words.
DTV Signal: Show the quality of digital signal: good, Normal, Bad.
17
Simple Troubleshooting
Simple Troubleshooting
If the display fails or performance dramatically deteriorates check the Display in accordance
with the following instructions.Remember to check the peripherals topinpiont the source of the
failure.
If the display still fails to perform as expected,connect your helpline for assistance.
No power
- Check all connections to the TV.
- Press either the power button or the Standby button on the Remote control.
No picture or sound
- Ensure that the TV is plugged in and the power is on.
- Ensure that the aerial is connected.
- Try a different programme.
Poor picture quality
- Check the aerial connections.
- Check that the channel is tuned in properly.
- Adjust the picture settings:brightness,colour,sharpness,contrast,hue.
- Make sure that the TV is not located close to electrical appliances that may emit radio
frequency interference.
No colour
- Adjust the colour setting.
- Check that the programme is broadcast in colour.
- Check that the cannel is tuned properly.
TV does not respond to remote control
- Check that there are no obstructions between the remote control and the unit.
- Check that the remote control is within range of the unit.
- Check that the batteries in the remote control and not weak or exhausted.
This LED TV is for household use and registered as harmless on electromagnetic waves.
Therefore,you can use it in every location as well as residential areas.
18
Technical Specifications
LED Panel
RGB
ATV
DTV
AV
Panel Size
Brightness
Contrast
Resolution
Sync
Signal
MODE
Input
Video System
Sound
System
Impedance
Bandwidth
Modulation
Video System
Sound
System
Color system
Video
42 inch (diagonal)
300 cd/m
2
3000:1
1920x1080
H: 30-75KHz V: 56-75Hz
0.7Vp-p@75ohm
Max 1920X1080@60Hz
impedance
NTSC
M, J, 4.43.
ATSC/NTSC
75ȍ
6MHz
ATSC:8VSB QAM:64QAM, 256QAM
MPEG 2 MP@ML
MPEG 1/ layer 1/AC-3
PAL/NTSC/SECAM
1Vp-p@75ohm
Audio
YPbPr Video
Audio
Format
HDMI
Video
Format
Amplifier
CLASS D
500mV rms
Y:1Vp-p@75ohm,PbPr:0.7Vp-p@75ohm
500mVrms
Max. 1080P
Standard TMDS
Max. 1080P
2 X 8W @ 8ohm
* Product specifications and appearance are subject to change without notice.
19
PRESET MODE FOR VGAȽHDMI
VGA FORMAT MODE
Resolution Refresh Rate
1920X1080
1366X768
1024X768
800X600
640X480
720X400 ZHK5.13 ZH07
ZH06
ZH06
70HZ 56.5KHZ
ZHK74
HDMI FORMAT MODE
ZHK74.6
ZHK5.55 ZH06
ZHK9.95 ZH06
ZHK4.84 ZH06
ZHK0.06 ZH57
ZHK9.73 ZH06
ZHK2.74 ZH07
ZHK9.64 ZH57
ZHK5.13 ZH06
ZHK9.73 ZH07
ZHK5.73 ZH57
Format Resolution Hor.Freq(KHz) Vert.Freq(HZ)
480i 480 15.734 60
480p 480
576i 576
576p 576 31.250 50
720p 720 44.955 60
1080i 1080
1080p 1080
31.465
31.500
15.625
15.734
28.125
33.750
56.250
67.500
59.94
60
50
50
60
50
60
20
Loading...